GAP: ASSEMBLE REVISION 072 OF AGC PROGRAM ARTEMIS BY NASA 2021114-011 11:40 FEB. 26, 1971Note that the date is the date of the printout, not the date of the program revision.
Source Code
|
|
These source-code files were obtained by digitally photographing
an Artemis 72 (Apollo 15-17 Command Module) program listing from a private
collection and then
modifying pre-existing Comanche 55 (Apollo 11) source files to
incorporate changes. Photography was by Ron Burkey, and transcription
was performed by a team of volunteers. Note that the page images
presented online are of reduced quality, and that additional images
may be available. Report any conversion errors or legibility
problems in page images to info@sandroid.org.
Notations on the program listing read, in part:GAP: ASSEMBLE REVISION 072 OF AGC PROGRAM ARTEMIS BY NASA 2021114-011 11:40 FEB. 26, 1971Note that the date is the date of the printout, not the date of the program revision. |
060191,000002: ## Copyright: Public domain.
060192,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
060193,000004: ## Purpose: Part of the source code for Artemis (i.e., Colossus 3),
060194,000005: ## build 072. This is for the Command Module's (CM)
060195,000006: ## Apollo Guidance Computer (AGC), for
060196,000007: ## Apollo 15-17.
060197,000008: ## Assembler: yaYUL
060198,000009: ## Contact: Jim Lawton <jim DOT lawton AT gmail DOT com>
060199,000010: ## Website: www.ibiblio.org/apollo/index.html
060200,000011: ## Page Scans: www.ibiblio.org/apollo/ScansForConversion/Artemis072/
060201,000012: ## Mod history: 2009-08-18 JL Adapted from corresponding Comanche 055 file.
060202,000013: ## 2010-02-20 RSB Un-##'d this header.
060203,000014: ## 2017-02-08 RSB Proofed comment text by using octopus/ProoferComments.
060204,000015: ## 2017-03-16 RSB Comment-text fixes identified in 5-way
060205,000016: ## side-by-side diff of Luminary 69/99/116/131/210.
060206,000017: ## 2017-03-17 RSB Comment-text fixes identified by 4-way diff'ing
060207,000018: ## of Colossus 237 & 249, Comanche 55, and Artemis 72.
060208,000019:
|
|
Page 1402 |
060210,000021:
060211,000022: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
060212,000023:
060213,000024: 4000 SETLOC FFTAG1
060214,000025: 4000 BANK
060215,000026:
060216,000027: 5344 COUNT* $$/PHASE
060217,000028: 5344 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
060218,000029: 5345 30000 CAF 0
060219,000030: 5346 24002 INCR Q
060220,000031:
060221,000032: 5347 55214 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
060222,000033: 5350 35353 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
060223,000034: 5351 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
060224,000035: 5352 14660 TCF BANKJUMP # PUTS Q INTO A
060225,000036: 5353 20463 CADR SETUPDSP
060226,000037:
060227,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
060228,000039:
060229,000040: 5354 50002 CHECKMM INDEX Q
060230,000041: 5355 40000 CS 0
060231,000042: 5356 61214 AD MODREG
060232,000043: 5357 00006 EXTEND
060233,000044: 5360 16710 BZF Q+2
060234,000045: 5361 16706 TCF Q+1 # NO MATCH
060235,000046:
060236,000047: 10,2000 SETLOC PHASETAB
060237,000048: 10,2000 BANK
060238,000049:
060239,000050: 10,2463 COUNT* $$/PHASE
060240,000051: 10,2463 00004 SETUPDSP INHINT
060241,000052: 10,2464 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
060242,000053: 10,2465 05120 TC NOVAC30 # EITHER A TASK OR JOB CAN COMETO NEWMODEX
060243,000054: 10,2466 1214 EBANK= MODREG
060244,000055: 10,2466 03377 60102 2CADR DSPMMJOB
060245,000056:
060246,000057: 10,2470 52071 DXCH RUPTREG1
060247,000058: 10,2471 00003 RELINT
060248,000059: 10,2472 52006 DXCH Z # RETURN
060249,000060:
060250,000061: 10,2473 40,3377 DSPMMJOB EQUALS DSPMMJB
060251,000062:
060252,000063: 4000 SETLOC FFTAG1
060253,000064: 4000 BANK
|
|
Page 1403 |
060255,000066:
060256,000067: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
060257,000068: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
060258,000069:
060259,000070: # TC PHASCHNG
060260,000071: # OCT XXXXX
060261,000072:
060262,000073: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
060263,000074: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
060264,000075:
060265,000076: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
060266,000077: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
060267,000078: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
060268,000079: # LONGCALL TO BE RESTARTED.
060269,000080: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
060270,000081:
060271,000082: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
060272,000083:
060273,000084: # TL0 00P PPP PPP GGG ,
060274,000085:
060275,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
060276,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
060277,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
060278,000089: # IT IS SET TO 0. SOME EXAMPLES,
060279,000090:
060280,000091: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
060281,000092: # OCT 00003 MAKING GROUP 3 INACTIVE
060282,000093:
060283,000094: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
060284,000095: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
060285,000096:
060286,000097: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
060287,000098: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
060288,000099: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
060289,000100: # LOCATION
060290,000101: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
060291,000102: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
060292,000103: # LONGBASE WAS SET THIS SINGLE ENTRY
060293,000104: # SHOULD BE A LONGCALL)
060294,000105: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
060295,000106: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
060296,000107: # LONGCALL TO BE RESTARTED
060297,000108:
060298,000109: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
060299,000110: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
060300,000111:
060301,000112: # TL0 1AD XXX CJW GGG
060302,000113:
060303,000114: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
060304,000115: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
060305,000116: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1404 |
060307,000118: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
060308,000119: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
060309,000120: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
060310,000121: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
060311,000122: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
060312,000123: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
060313,000124: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
060314,000125: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
060315,000126:
060316,000127: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
060317,000128: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
060318,000129: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
060319,000130: # AD+3 ALSO GO TO AD+3
060320,000131:
060321,000132: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
060322,000133: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
060323,000134: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
060324,000135: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
060325,000136: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
060326,000137: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
060327,000138: # LOCATION AD+5
060328,000139:
060329,000140: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
060330,000141: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
060331,000142:
060332,000143: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
060333,000144: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
060334,000145: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
060335,000146:
060336,000147: # TL1 DAP PPP PPP GGG
060337,000148:
060338,000149: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
060339,000150: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
060340,000151: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
060341,000152: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
060342,000153: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
060343,000154:
060344,000155: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
060345,000156: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
060346,000157: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
060347,000158: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
060348,000159: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
060349,000160: # AD+5 GO TO AD+5
060350,000161:
060351,000162: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
060352,000163: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
060353,000164: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
060354,000165: # BY MEANS OF GROUP 5
060355,000166:
|
|
Page 1405 |
060357,000168:
060358,000169: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
060359,000170:
060360,000171:
060361,000172: # SUMMARY OF BITS
060362,000173:
060363,000174: # TYPE A TL0 00P PPP PPP GGG
060364,000175:
060365,000176: # TYPE B TL1 DAP PPP PPP GGG
060366,000177:
060367,000178: # TYPE C TL0 1AD XXX CJW GGG
060368,000179:
060369,000180:
|
|
Page 1406 |
060371,000182:
060372,000183: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
060373,000184: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
060374,000185: # CALLS ARE MADE IN THE FOLLOWING MANNER,
060375,000186:
060376,000187: # TC 2PHSCHNG
060377,000188: # OCT XXXXX
060378,000189: # OCT YYYYY
060379,000190:
060380,000191: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
060381,000192: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
060382,000193: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
060383,000194:
060384,000195: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
060385,000196: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
060386,000197: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
060387,000198: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
060388,000199: # AD+4 FOR GROUP 5 PHASE INFORMATION
060389,000200:
060390,000201: 5362 COUNT* $$/PHASE
060391,000202: 5362 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
060392,000203: 5363 50002 NDX Q
060393,000204: 5364 30000 CA 0
060394,000205: 5365 24002 INCR Q
060395,000206: 5366 54072 TS TEMPP2
060396,000207:
060397,000208: 5367 74774 MASK OCT7
060398,000209: 5370 60000 DOUBLE
060399,000210: 5371 54071 TS TEMPG2
060400,000211:
060401,000212: 5372 30072 CA TEMPP2
060402,000213: 5373 75056 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
060403,000214: 5374 00006 EXTEND
060404,000215: 5375 74755 MP BIT12
060405,000216: 5376 56072 XCH TEMPP2
060406,000217:
060407,000218: 5377 74752 MASK BIT15
060408,000219: 5400 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
060409,000220:
060410,000221: 5401 15405 TCF PHASCHNG +3
060411,000222:
060412,000223: 5402 00004 PHASCHNG INHINT
060413,000224: 5403 34770 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
060414,000225: 5404 54066 TS TEMPSW2
060415,000226:
060416,000227: 5405 50002 +3 NDX Q
060417,000228: 5406 30000 CA 0
060418,000229: 5407 24002 INCR Q
060419,000230: 5410 54065 TS TEMPSW
|
|
Page 1407 |
060421,000232: 5411 00006 EXTEND
060422,000233: 5412 35415 DCA ADRPCHN2 # OFF TO SWITCHED BANK
060423,000234: 5413 52006 DTCB
060424,000235:
060425,000236: 5414 E3,1400 EBANK= LST1
060426,000237: 5414 02473 20063 ADRPCHN2 2CADR PHSCHNG2
060427,000238:
060428,000239:
060429,000240: 5416 22073 ONEORTWO LXCH TEMPBBCN
060430,000241: 5417 22006 LXCH BBANK
060431,000242: 5420 22073 LXCH TEMPBBCN
060432,000243:
060433,000244: 5421 75053 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
060434,000245: 5422 10000 CCS A
060435,000246: 5423 15464 TCF CHECKB # IT IS OF TYPE :B:
060436,000247:
060437,000248: 5424 30062 CA TEMPP
060438,000249: 5425 74762 MASK BIT7
060439,000250: 5426 10000 CCS A # SHALL WE USE THE OLD PRIORITY
060440,000251: 5427 15451 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
060441,000252:
060442,000253: 5430 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
060443,000254: 5431 31256 CA PHSPRDT1 -2
060444,000255: 5432 54070 -1 TS TEMPPR
060445,000256:
060446,000257: 5433 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
060447,000258: 5434 74761 MASK BIT8
060448,000259: 5435 10000 CCS A
060449,000260: 5436 15455 TCF GETNEWNM
060450,000261:
060451,000262: 5437 30002 CA Q
060452,000263: 5440 54063 TS TEMPNM
060453,000264: 5441 30006 CA BB
060454,000265: 5442 00006 EXTEND # PICK UP USERS SUPERBANK
060455,000266: 5443 04007 ROR SUPERBNK
060456,000267: 5444 54064 TS TEMPBB
060457,000268:
060458,000269: 5445 35450 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
060459,000270: 5446 22073 LXCH TEMPBBCN
060460,000271: 5447 52006 DTCB
060461,000272:
060462,000273: 5450 02561 CON2ADR GENADR CON2
060463,000274:
060464,000275: 5451 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
060465,000276: 5452 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
060466,000277: 5453 24002 INCR Q # OBTAIN RETURN ADDRESS
060467,000278: 5454 15432 TCF CON1 -1
060468,000279:
060469,000280: 5455 00006 GETNEWNM EXTEND
|
|
Page 1408 |
060471,000282: 5456 50002 INDEX Q
060472,000283: 5457 30001 DCA 0
060473,000284: 5460 52064 DXCH TEMPNM
060474,000285: 5461 34767 CA TWO
060475,000286: 5462 26002 ADS Q # OBTAIN RETURN ADDRESS
060476,000287:
060477,000288: 5463 15445 TCF TOCON2
060478,000289:
060479,000290: 5464 5053 OCT14000 EQUALS PRIO14
060480,000291: 5464 0061 TEMPG EQUALS ITEMP1
060481,000292: 5464 0062 TEMPP EQUALS ITEMP2
060482,000293: 5464 0063 TEMPNM EQUALS ITEMP3
060483,000294: 5464 0064 TEMPBB EQUALS ITEMP4
060484,000295: 5464 0065 TEMPSW EQUALS ITEMP5
060485,000296: 5464 0066 TEMPSW2 EQUALS ITEMP6
060486,000297: 5464 0070 TEMPPR EQUALS RUPTREG1
060487,000298: 5464 0071 TEMPG2 EQUALS RUPTREG2
060488,000299: 5464 0072 TEMPP2 EQUALS RUPTREG3
060489,000300:
060490,000301: 5464 0073 TEMPBBCN EQUALS RUPTREG4
060491,000302: 5464 0000006 BB EQUALS BBANK
060492,000303:
060493,000304: 10,2000 SETLOC PHASETAB
060494,000305: 10,2000 BANK
060495,000306:
060496,000307: 10,2473 E3,1436 EBANK= PHSNAME1
060497,000308: 10,2473 COUNT* $$/PHASE
060498,000309: 10,2473 22073 PHSCHNG2 LXCH TEMPBBCN
060499,000310: 10,2474 30065 CA TEMPSW
060500,000311: 10,2475 74774 MASK OCT7
060501,000312: 10,2476 60000 DOUBLE
060502,000313: 10,2477 54061 TS TEMPG
060503,000314:
060504,000315: 10,2500 30065 CA TEMPSW
060505,000316: 10,2501 75056 MASK OCT17770
060506,000317: 10,2502 00006 EXTEND
060507,000318: 10,2503 74755 MP BIT12
060508,000319: 10,2504 54062 TS TEMPP
060509,000320:
060510,000321: 10,2505 30065 CA TEMPSW
060511,000322: 10,2506 74076 MASK OCT60000
060512,000323: 10,2507 56065 XCH TEMPSW
060513,000324: 10,2510 75053 MASK OCT14000
060514,000325: 10,2511 10000 CCS A
060515,000326:
060516,000327: 10,2512 15416 TCF ONEORTWO
060517,000328:
060518,000329: 10,2513 30062 CA TEMPP # START STORING THE PHASE INFORMATION
060519,000330: 10,2514 50061 NDX TEMPG
|
|
Page 1409 |
060521,000332: 10,2515 55154 TS PHASE1 -2
060522,000333:
060523,000334: 10,2516 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
060524,000335: 10,2517 12533 TCF BELOW2 # IT:S A PHASCHNG
060525,000336:
060526,000337: 10,2520 12521 TCF +1 # IT:S A 2PHSCHNG
060527,000338: 10,2521 40072 CS TEMPP2
060528,000339: 10,2522 22072 LXCH TEMPP2
060529,000340: 10,2523 50071 NDX TEMPG2
060530,000341: 10,2524 53154 DXCH -PHASE1 -2
060531,000342:
060532,000343: 10,2525 10066 CCS TEMPSW2
060533,000344: 10,2526 12527 NOOP # CAN:T GET HERE
060534,000345: 10,2527 12533 TCF BELOW2
060535,000346:
060536,000347: 10,2530 40025 CS TIME1
060537,000348: 10,2531 50071 NDX TEMPG2
060538,000349: 10,2532 55255 TS TBASE1 -2
060539,000350:
060540,000351: 10,2533 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
060541,000352: 10,2534 12547 TCF BELOW3 # SET LONGBASE ONLY
060542,000353: 10,2535 12552 TCF BELOW4 # SET NEITHER
060543,000354:
060544,000355: 10,2536 40025 CS TIME1 # SET TBASE TO BEGIN WITH
060545,000356: 10,2537 50061 NDX TEMPG
060546,000357: 10,2540 55255 TS TBASE1 -2
060547,000358:
060548,000359: 10,2541 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
060549,000360: 10,2542 62545 AD BIT14COM
060550,000361: 10,2543 10000 CCS A
060551,000362: 10,2544 12545 NOOP # ***** CANT GET HERE *****
060552,000363: 10,2545 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
060553,000364: 10,2546 12552 TCF BELOW4 # NO WE NEED ONLY SET TBASE
060554,000365:
060555,000366: 10,2547 00006 BELOW3 EXTEND # SET LONGBASE
060556,000367: 10,2550 30025 DCA TIME2
060557,000368: 10,2551 53303 DXCH LONGBASE
060558,000369:
060559,000370: 10,2552 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
060560,000371: 10,2553 50061 NDX TEMPG
060561,000372: 10,2554 55153 TS -PHASE1 -2
060562,000373:
060563,000374: 10,2555 30002 CA Q
060564,000375: 10,2556 22073 LXCH TEMPBBCN
060565,000376: 10,2557 00003 RELINT
060566,000377: 10,2560 52006 DTCB
060567,000378: 10,2561 22073 CON2 LXCH TEMPBBCN
060568,000379:
060569,000380: 10,2562 30062 CA TEMPP
060570,000381: 10,2563 50061 NDX TEMPG
|
|
Page 1410 |
060572,000383: 10,2564 55154 TS PHASE1 -2
060573,000384:
060574,000385: 10,2565 30070 CA TEMPPR
060575,000386: 10,2566 50061 NDX TEMPG
060576,000387: 10,2567 55256 TS PHSPRDT1 -2
060577,000388:
060578,000389: 10,2570 00006 EXTEND
060579,000390: 10,2571 30064 DCA TEMPNM
060580,000391: 10,2572 50061 NDX TEMPG
060581,000392: 10,2573 53435 DXCH PHSNAME1 -2
060582,000393:
060583,000394: 10,2574 12516 TCF BELOW1
060584,000395:
060585,000396: 4000 SETLOC FFTAG1
060586,000397: 4000 BANK
060587,000398:
060588,000399: 5464 COUNT* $$/PHASE
060589,000400: 5464 74755 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
060590,000401: 5465 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
060591,000402: 5466 15451 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
060592,000403:
060593,000404: 5467 15430 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc