GAP: ASSEMBLE REVISION 237 OF AGC PROGRAM COLOSSUS BY NASA 2021111-031 1:17 AUG. 24, 1968Note that the date is the date of the printout, not the date of the program revision.
Source Code
|
|
These source-code files were derived from scans of the
Colossus 237 (Apollo 8 Command Module) program listing from the private collection of original
AGC developer Fred Martin. Scanning was by Ron Burkey. Pre-existing Colossus 249
(Apollo 9 CM) source files were used as a template, and changes between Colossus 249
and Colossus 237 were manually transcribed by a team of volunteers. Note
that the page images
presented online are of reduced quality, and that additional images
are available. Report any conversion errors or legibility
problems in page images to info@sandroid.org.
Notations on the program listing read, in part:GAP: ASSEMBLE REVISION 237 OF AGC PROGRAM COLOSSUS BY NASA 2021111-031 1:17 AUG. 24, 1968Note that the date is the date of the printout, not the date of the program revision. |
058162,000002: ## Copyright: Public domain.
058163,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
058164,000004: ## Purpose: Part of the source code for Colossus build 237.
058165,000005: ## This is for the Command Module's (CM) Apollo Guidance
058166,000006: ## Computer (AGC), for Apollo 8.
058167,000007: ## Assembler: yaYUL
058168,000008: ## Contact: Jim Lawton <jim DOT lawton AT gmail DOT com>
058169,000009: ## Website: www.ibiblio.org/apollo/index.html
058170,000010: ## Page Scans: www.ibiblio.org/apollo/ScansForConversion/Colossus237/
058171,000011: ## Mod history: 2011-04-17 JL Adapted from corresponding Colossus 249 file.
058172,000012: ## 2016-08-14 RSB Added SBANK to handle addressing discrepancies.
058173,000013: ## 2017-01-01 RSB Proofed comment text using octopus/ProoferComments,
058174,000014: ## and fixed errors found.
058175,000015: ## 2017-01-18 RSB Fixed comment-text errors noted while diff'ing
058176,000016: ## vs Colossus 249.
058177,000017: ## 2017-06-17 MAS Globally removed all SBANK= workarounds.
058178,000018:
|
|
Page 1368 |
058180,000020: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
058181,000021:
058182,000022: 43,3721 COUNT 02/PHASE
058183,000023:
058184,000024: 5243 BLOCK 02
058185,000025: 4000 SETLOC FFTAG1
058186,000026: 4000 BANK
058187,000027:
058188,000028: 5243 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
058189,000029: 5244 30000 CAF 0
058190,000030: 5245 24002 INCR Q
058191,000031:
058192,000032: 5246 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
058193,000033: 5247 35252 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
058194,000034: 5250 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
058195,000035: 5251 14577 TCF BANKJUMP # PUTS Q INTO A
058196,000036: 5252 20344 CADR SETUPDSP
058197,000037:
058198,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
058199,000039:
058200,000040: 5253 50002 CHECKMM INDEX Q
058201,000041: 5254 40000 CS 0
058202,000042: 5255 61011 AD MODREG
058203,000043: 5256 00006 EXTEND
058204,000044: 5257 16710 BZF Q+2
058205,000045: 5260 16706 TCF Q+1 # NO MATCH
058206,000046:
058207,000047: 5261 6711 TCQ = Q+2 +1
058208,000048:
058209,000049: 14,3751 BANK 14
058210,000050: 10,2000 SETLOC PHASETAB
058211,000051: 10,2000 BANK
058212,000052:
058213,000053: 10,2344 COUNT 10/PHASE
058214,000054:
058215,000055: 10,2344 00004 SETUPDSP INHINT
058216,000056: 10,2345 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
058217,000057: 10,2346 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
058218,000058: 10,2347 05027 TC NOVAC # NEWMODEX
058219,000059: 10,2350 1011 EBANK= MODREG
058220,000060: 10,2350 03435 60102 2CADR DSPMMJOB
058221,000061: 10,2352 52071 DXCH RUPTREG1
058222,000062: 10,2353 00003 RELINT
058223,000063: 10,2354 52006 DXCH Z # RETURN
058224,000064:
058225,000065: 10,2355 40,3435 DSPMMJOB EQUALS DSPMMJB
058226,000066:
058227,000067:
058228,000068: 5261 BLOCK 02
|
|
Page 1369 |
058230,000070: 4000 SETLOC FFTAG1
058231,000071: 4000 BANK
058232,000072:
|
|
Page 1370 |
058234,000074: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
058235,000075: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
058236,000076:
058237,000077: # TC PHASCHNG
058238,000078: # OCT XXXXX
058239,000079:
058240,000080: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATIONTHAT IS STORED PERMANENTLY. THESE
058241,000081: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
058242,000082:
058243,000083: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
058244,000084: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
058245,000085: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
058246,000086: # LONGCALL TO BE RESTARTED.
058247,000087: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
058248,000088:
058249,000089: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
058250,000090:
058251,000091: # TL0 00P PPP PPP GGG ,
058252,000092:
058253,000093: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
058254,000094: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
058255,000095: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
058256,000096: # IT IS SET TO 0. SOME EXAMPLES,
058257,000097:
058258,000098: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TOBE SET TO 0,
058259,000099: # OCT 00003 MAKING GROUP 3 INACTIVE
058260,000100:
058261,000101: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
058262,000102: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
058263,000103:
058264,000104: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
058265,000105: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
058266,000106: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
058267,000107: # LOCATION
058268,000108: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
058269,000109: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
058270,000110: # LONGBASE WAS SET THIS SINGLE ENTRY
058271,000111: # SHOULD BE A LONGCALL)
058272,000112: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
058273,000113: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
058274,000114: # LONGCALL TO BE RESTARTED
058275,000115:
058276,000116: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
058277,000117: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
058278,000118:
058279,000119: # TL0 1AD XXX CJW GGG
058280,000120:
058281,000121: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
058282,000122: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
058283,000123: # THESE THREE BIT S MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1371 |
058285,000125: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
058286,000126: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
058287,000127: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
058288,000128: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
058289,000129: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
058290,000130: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
058291,000131: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
058292,000132: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
058293,000133:
058294,000134: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
058295,000135: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITHA PRIORITY
058296,000136: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
058297,000137: # AD+3 ALSO GO TO AD+3
058298,000138:
058299,000139: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
058300,000140: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
058301,000141: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
058302,000142: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
058303,000143: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
058304,000144: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
058305,000145: # LOCATION AD+5
058306,000146:
058307,000147: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
058308,000148: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
058309,000149:
058310,000150:
058311,000151: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
058312,000152: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
058313,000153: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
058314,000154:
058315,000155: # TL1 DAP PPP PPP GGG
058316,000156:
058317,000157: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
058318,000158: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
058319,000159: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
058320,000160: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN , OR 0 IF IT IS TO BE
058321,000161: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
058322,000162:
058323,000163: # AD TC PHASCHNG TBASE IS SET AND ARESTART CAUSE GROUP 3
058324,000164: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
058325,000165: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT(WE CAN
058326,000166: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
058327,000167: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
058328,000168: # AD+5 GO TO AD+5
058329,000169:
058330,000170: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
058331,000171: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
058332,000172: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
058333,000173: # BY MEANS OF GROUP 5
058334,000174:
|
|
Page 1372 |
058336,000176: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
058337,000177:
058338,000178: # SUMMARY OF BITS
058339,000179:
058340,000180: # TYPE A TL0 00P PPP PPP GGG
058341,000181:
058342,000182: # TYPE B TL1 DAP PPP PPP GGG
058343,000183:
058344,000184: # TYPE C TL0 1AD XXX CJW GGG
058345,000185:
|
|
Page 1373 |
058347,000187: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
058348,000188: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
058349,000189: # CALLS ARE MADE IN THE FOLLOWING MANNER,
058350,000190:
058351,000191: # TC 2PHSCHNG
058352,000192: # OCT XXXXX
058353,000193: # OCT YYYYY
058354,000194:
058355,000195: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
058356,000196: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
058357,000197: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
058358,000198:
058359,000199: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
058360,000200: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
058361,000201: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
058362,000202: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
058363,000203: # AD+4 FOR GROUP 5 PHASE INFORMATION
058364,000204:
058365,000205: 5261 COUNT 02/PHASE
058366,000206:
058367,000207: 5261 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
058368,000208: 5262 50002 NDX Q
058369,000209: 5263 30000 CA 0
058370,000210: 5264 24002 INCR Q
058371,000211: 5265 54072 TS TEMPP2
058372,000212:
058373,000213: 5266 74716 MASK OCT7
058374,000214: 5267 60000 DOUBLE
058375,000215: 5270 54071 TS TEMPG2
058376,000216:
058377,000217: 5271 30072 CA TEMPP2
058378,000218: 5272 74765 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
058379,000219: 5273 00006 EXTEND
058380,000220: 5274 74677 MP BIT12
058381,000221: 5275 56072 XCH TEMPP2
058382,000222:
058383,000223: 5276 74674 MASK BIT15
058384,000224: 5277 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
058385,000225:
058386,000226: 5300 15304 TCF PHASCHNG +3
058387,000227:
058388,000228:
058389,000229: 5301 00004 PHASCHNG INHINT
058390,000230: 5302 34712 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
058391,000231: 5303 54066 TS TEMPSW2
058392,000232:
058393,000233: 5304 50002 NDX Q
058394,000234: 5305 30000 CA 0
058395,000235: 5306 24002 INCR Q
058396,000236: 5307 54065 TS TEMPSW
|
|
Page 1374 |
058398,000238: 5310 00006 EXTEND
058399,000239: 5311 35314 DCA ADRPCHN2 # OFF TO SWITCHED BANK
058400,000240: 5312 52006 DTCB
058401,000241:
058402,000242: 5313 E3,1400 EBANK= LST1
058403,000243: 5313 02355 20103 ADRPCHN2 2CADR PHSCHNG2
058404,000244:
058405,000245:
058406,000246: 5315 22073 ONEORTWO LXCH TEMPBBCN
058407,000247: 5316 22006 LXCH BBANK
058408,000248: 5317 22073 LXCH TEMPBBCN
058409,000249:
058410,000250: 5320 74761 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
058411,000251: 5321 10000 CCS A
058412,000252: 5322 15363 TCF CHECKB # IT IS OF TYPE :B:
058413,000253:
058414,000254: 5323 30062 CA TEMPP
058415,000255: 5324 74704 MASK BIT7
058416,000256: 5325 10000 CCS A # SHALL WE USE THE OLD PRIORITY
058417,000257: 5326 15350 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
058418,000258:
058419,000259: 5327 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
058420,000260: 5330 31052 CA PHSPRDT1 -2
058421,000261: 5331 54070 TS TEMPPR
058422,000262:
058423,000263: 5332 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
058424,000264: 5333 74703 MASK BIT8
058425,000265: 5334 10000 CCS A
058426,000266: 5335 15354 TCF GETNEWNM
058427,000267:
058428,000268: 5336 30002 CA Q
058429,000269: 5337 54063 TS TEMPNM
058430,000270: 5340 30006 CA BB
058431,000271: 5341 00006 EXTEND # PICK UP USERS SUPERBANK
058432,000272: 5342 04007 ROR SUPERBNK
058433,000273: 5343 54064 TS TEMPBB
058434,000274:
058435,000275: 5344 35347 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
058436,000276: 5345 22073 LXCH TEMPBBCN
058437,000277: 5346 52006 DTCB
058438,000278:
058439,000279: 5347 02443 CON2ADR GENADR CON2
058440,000280:
058441,000281: 5350 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
058442,000282: 5351 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
058443,000283: 5352 24002 INCR Q # OBTAIN RETURN ADDRESS
058444,000284: 5353 15331 TCF CON1 -1
058445,000285:
058446,000286: 5354 00006 GETNEWNM EXTEND
|
|
Page 1375 |
058448,000288: 5355 50002 INDEX Q
058449,000289: 5356 30001 DCA 0
058450,000290: 5357 52064 DXCH TEMPNM
058451,000291: 5360 34711 CA TWO
058452,000292: 5361 26002 ADS Q # OBTAIN RETURN ADDRESS
058453,000293:
058454,000294: 5362 15344 TCF TOCON2
058455,000295:
058456,000296: 5363 4761 OCT14000 EQUALS PRIO14
058457,000297: 5363 0061 TEMPG EQUALS ITEMP1
058458,000298: 5363 0062 TEMPP EQUALS ITEMP2
058459,000299: 5363 0063 TEMPNM EQUALS ITEMP3
058460,000300: 5363 0064 TEMPBB EQUALS ITEMP4
058461,000301: 5363 0065 TEMPSW EQUALS ITEMP5
058462,000302: 5363 0066 TEMPSW2 EQUALS ITEMP6
058463,000303: 5363 0070 TEMPPR EQUALS RUPTREG1
058464,000304: 5363 0071 TEMPG2 EQUALS RUPTREG2
058465,000305: 5363 0072 TEMPP2 EQUALS RUPTREG3
058466,000306:
058467,000307: 5363 0073 TEMPBBCN EQUALS RUPTREG4
058468,000308: 5363 0000006 BB EQUALS BBANK
058469,000309:
058470,000310:
058471,000311: 14,3751 BANK 14
058472,000312: 10,2000 SETLOC PHASETAB
058473,000313: 10,2000 BANK
058474,000314:
058475,000315: 10,2355 E3,1436 EBANK= PHSNAME1
058476,000316: 10,2355 COUNT 10/PHASE
058477,000317:
058478,000318: 10,2355 22073 PHSCHNG2 LXCH TEMPBBCN
058479,000319: 10,2356 30065 CA TEMPSW
058480,000320: 10,2357 74716 MASK OCT7
058481,000321: 10,2360 60000 DOUBLE
058482,000322: 10,2361 54061 TS TEMPG
058483,000323:
058484,000324: 10,2362 30065 CA TEMPSW
058485,000325: 10,2363 74765 MASK OCT17770
058486,000326: 10,2364 00006 EXTEND
058487,000327: 10,2365 74677 MP BIT12
058488,000328: 10,2366 54062 TS TEMPP
058489,000329:
058490,000330: 10,2367 30065 CA TEMPSW
058491,000331: 10,2370 74105 MASK OCT60000
058492,000332: 10,2371 56065 XCH TEMPSW
058493,000333: 10,2372 74761 MASK OCT14000
058494,000334: 10,2373 10000 CCS A
058495,000335: 10,2374 15315 TCF ONEORTWO
058496,000336:
|
|
Page 1376 |
058498,000338: 10,2375 30062 CA TEMPP # START STORING THE PHASE INFORMATION
058499,000339: 10,2376 50061 NDX TEMPG
058500,000340: 10,2377 54751 TS PHASE1 -2
058501,000341:
058502,000342: 10,2400 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
058503,000343: 10,2401 12415 TCF BELOW2 # IT:S A PHASCHNG
058504,000344:
058505,000345: 10,2402 12403 TCF +1 # IT:S A 2PHSCHNG
058506,000346: 10,2403 40072 CS TEMPP2
058507,000347: 10,2404 22072 LXCH TEMPP2
058508,000348: 10,2405 50071 NDX TEMPG2
058509,000349: 10,2406 52751 DXCH -PHASE1 -2
058510,000350:
058511,000351: 10,2407 10066 CCS TEMPSW2
058512,000352: 10,2410 12411 NOOP # CAN:T GET HERE
058513,000353: 10,2411 12415 TCF BELOW2
058514,000354:
058515,000355: 10,2412 40025 CS TIME1
058516,000356: 10,2413 50071 NDX TEMPG2
058517,000357: 10,2414 55051 TS TBASE1 -2
058518,000358:
058519,000359: 10,2415 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
058520,000360: 10,2416 12431 TCF BELOW3 # SET LONGBASE ONLY
058521,000361: 10,2417 12434 TCF BELOW4 # SET NEITHER
058522,000362:
058523,000363: 10,2420 40025 CS TIME1 # SET TBASE TO BEGIN WITH
058524,000364: 10,2421 50061 NDX TEMPG
058525,000365: 10,2422 55051 TS TBASE1 -2
058526,000366:
058527,000367: 10,2423 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
058528,000368: 10,2424 62427 AD BIT14COM
058529,000369: 10,2425 10000 CCS A
058530,000370: 10,2426 12427 NOOP # ***** CANT GET HERE *****
058531,000371: 10,2427 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
058532,000372: 10,2430 12434 TCF BELOW4 # NO WE NEED ONLY SET TBASE
058533,000373:
058534,000374: 10,2431 00006 BELOW3 EXTEND # SET LONGBASE
058535,000375: 10,2432 30025 DCA TIME2
058536,000376: 10,2433 53136 DXCH LONGBASE
058537,000377:
058538,000378: 10,2434 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
058539,000379: 10,2435 50061 NDX TEMPG
058540,000380: 10,2436 54750 TS -PHASE1 -2
058541,000381:
058542,000382: 10,2437 30002 CA Q
058543,000383: 10,2440 22073 LXCH TEMPBBCN
058544,000384: 10,2441 00003 RELINT
058545,000385: 10,2442 52006 DTCB
058546,000386: 10,2443 22073 CON2 LXCH TEMPBBCN
058547,000387:
|
|
Page 1377 |
058549,000389: 10,2444 30062 CA TEMPP
058550,000390: 10,2445 50061 NDX TEMPG
058551,000391: 10,2446 54751 TS PHASE1 -2
058552,000392:
058553,000393: 10,2447 30070 CA TEMPPR
058554,000394: 10,2450 50061 NDX TEMPG
058555,000395: 10,2451 55052 TS PHSPRDT1 -2
058556,000396:
058557,000397: 10,2452 00006 EXTEND
058558,000398: 10,2453 30064 DCA TEMPNM
058559,000399: 10,2454 50061 NDX TEMPG
058560,000400: 10,2455 53435 DXCH PHSNAME1 -2
058561,000401:
058562,000402: 10,2456 12400 TCF BELOW1
058563,000403:
058564,000404: 5363 BLOCK 02
058565,000405: 4000 SETLOC FFTAG1
058566,000406: 4000 BANK
058567,000407:
058568,000408: 5363 COUNT 02/PHASE
058569,000409:
058570,000410: 5363 74677 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
058571,000411: 5364 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
058572,000412: 5365 15350 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
058573,000413:
058574,000414: 5366 15327 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc