Source Code
|
These source-code files are part of a reconstructed copy of Comanche 67, the
Apollo Guidance Computer (AGC) Command Module (CM) software for Apollo 12.
They have been adapted from sources files for Comanche 55, and updated via
disassembly of binary dumps of original core rope memory modules, part numbers
2003972-1081, 2003972-1091, 2003972-1111, 2003972-1121, 2003972-1131, and 2003972-1141.
Since only binary dumps (rather than listings) of Comanche 67 are available as source material,
all comments and labels are approximate.
They have been taken from other AGC programs where possible, or, in some places, written
from scratch to match what we believe would have been in the original listing.
|
058224,000002: ## Copyright: Public domain.
058225,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
058226,000004: ## Purpose: A section of Comanche revision 067.
058227,000005: ## It is part of the reconstructed source code for the flight
058228,000006: ## software for the Command Module's (CM) Apollo Guidance Computer
058229,000007: ## (AGC) for Apollo 12. No original listings of this program are
058230,000008: ## available; instead, this file was created via dissassembly of
058231,000009: ## dumps of Comanche 067 core rope modules and comparison with
058232,000010: ## other AGC programs.
058233,000011: ## Assembler: yaYUL
058234,000012: ## Contact: Ron Burkey <info@sandroid.org>.
058235,000013: ## Website: www.ibiblio.org/apollo/index.html
058236,000014: ## Mod history: 2023-08-16 MAS Created from Comanche 055.
058237,000015:
058238,000016: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
058239,000017:
058240,000018: 43,3736 COUNT 02/PHASE
058241,000019: 5370 BLOCK 02
058242,000020: 4000 SETLOC FFTAG1
058243,000021: 4000 BANK
058244,000022:
058245,000023: 5370 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
058246,000024: 5371 30000 CAF 0
058247,000025: 5372 24002 INCR Q
058248,000026:
058249,000027: 5373 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
058250,000028: 5374 35377 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
058251,000029: 5375 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
058252,000030: 5376 14720 TCF BANKJUMP # PUTS Q INTO A
058253,000031: 5377 20440 CADR SETUPDSP
058254,000032:
058255,000033: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
058256,000034:
058257,000035: 5400 50002 CHECKMM INDEX Q
058258,000036: 5401 40000 CS 0
058259,000037: 5402 61011 AD MODREG
058260,000038: 5403 00006 EXTEND
058261,000039: 5404 16710 BZF Q+2
058262,000040: 5405 16706 TCF Q+1 # NO MATCH
058263,000041:
058264,000042: 5406 6711 TCQ = Q+2 +1
058265,000043:
058266,000044: 14,3763 BANK 14
058267,000045: 10,2000 SETLOC PHASETAB
058268,000046: 10,2000 BANK
058269,000047:
058270,000048: 10,2440 COUNT 10/PHASE
058271,000049:
058272,000050: 10,2440 00004 SETUPDSP INHINT
058273,000051: 10,2441 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
058274,000052: 10,2442 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
058275,000053: 10,2443 05150 TC NOVAC # NEWMODEX
058276,000054: 10,2444 1011 EBANK= MODREG
058277,000055: 10,2444 03450 60102 2CADR DSPMMJOB
058278,000056:
058279,000057: 10,2446 52071 DXCH RUPTREG1
058280,000058: 10,2447 00003 RELINT
058281,000059: 10,2450 52006 DXCH Z # RETURN
058282,000060:
058283,000061: 10,2451 40,3450 DSPMMJOB EQUALS DSPMMJB
058284,000062:
058285,000063: 5406 BLOCK 02
058286,000064: 4000 SETLOC FFTAG1
058287,000065: 4000 BANK
058288,000066:
058289,000067: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
058290,000068: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
058291,000069: # TC PHASCHNG
058292,000070: # OCT XXXXX
058293,000071: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
058294,000072: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
058295,000073: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
058296,000074: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
058297,000075: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
058298,000076: # LONGCALL TO BE RESTARTED.
058299,000077: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
058300,000078:
058301,000079: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
058302,000080: # TL0 00P PPP PPP GGG ,
058303,000081: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
058304,000082: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
058305,000083: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
058306,000084: # IT IS SET TO 0. SOME EXAMPLES,
058307,000085: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
058308,000086: # OCT 00003 MAKING GROUP 3 INACTIVE
058309,000087:
058310,000088: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
058311,000089: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
058312,000090:
058313,000091: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
058314,000092: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
058315,000093: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
058316,000094: # LOCATION
058317,000095:
058318,000096: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
058319,000097: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
058320,000098: # LONGBASE WAS SET THIS SINGLE ENTRY
058321,000099: # SHOULD BE A LONGCALL)
058322,000100:
058323,000101: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
058324,000102: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
058325,000103: # LONGCALL TO BE RESTARTED
058326,000104:
058327,000105: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
058328,000106: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
058329,000107: # TL0 1AD XXX CJW GGG
058330,000108: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
058331,000109: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
058332,000110: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
058333,000111: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
058334,000112: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
058335,000113: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
058336,000114: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
058337,000115: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
058338,000116: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
058339,000117: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
058340,000118: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
058341,000119: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
058342,000120: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
058343,000121: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
058344,000122: # AD+3 ALSO GO TO AD+3
058345,000123:
058346,000124: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
058347,000125: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
058348,000126: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
058349,000127: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
058350,000128: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
058351,000129: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
058352,000130: # LOCATION AD+5
058353,000131:
058354,000132: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
058355,000133: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
058356,000134:
058357,000135: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
058358,000136: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
058359,000137: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
058360,000138: # TL1 DAP PPP PPP GGG
058361,000139: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
058362,000140: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
058363,000141: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
058364,000142: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
058365,000143: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
058366,000144: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
058367,000145: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
058368,000146: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
058369,000147: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
058370,000148: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
058371,000149: # AD+5 GO TO AD+5
058372,000150:
058373,000151: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
058374,000152: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
058375,000153: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
058376,000154: # BY MEANS OF GROUP 5
058377,000155: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
058378,000156:
058379,000157: # SUMMARY OF BITS
058380,000158: # TYPE A TL0 00P PPP PPP GGG
058381,000159: # TYPE B TL1 DAP PPP PPP GGG
058382,000160: # TYPE C TL0 1AD XXX CJW GGG
058383,000161:
058384,000162: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
058385,000163: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
058386,000164: # CALLS ARE MADE IN THE FOLLOWING MANNER,
058387,000165: # TC 2PHSCHNG
058388,000166: # OCT XXXXX
058389,000167: # OCT YYYYY
058390,000168: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
058391,000169: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
058392,000170: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
058393,000171: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
058394,000172: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
058395,000173: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
058396,000174: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
058397,000175: # AD+4 FOR GROUP 5 PHASE INFORMATION
058398,000176:
058399,000177: 5406 COUNT 02/PHASE
058400,000178:
058401,000179: 5406 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
058402,000180: 5407 50002 NDX Q
058403,000181: 5410 30000 CA 0
058404,000182: 5411 24002 INCR Q
058405,000183: 5412 54072 TS TEMPP2
058406,000184:
058407,000185: 5413 75037 MASK OCT7
058408,000186: 5414 60000 DOUBLE
058409,000187: 5415 54071 TS TEMPG2
058410,000188:
058411,000189: 5416 30072 CA TEMPP2
058412,000190: 5417 75106 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
058413,000191: 5420 00006 EXTEND
058414,000192: 5421 75020 MP BIT12
058415,000193: 5422 56072 XCH TEMPP2
058416,000194:
058417,000195: 5423 75015 MASK BIT15
058418,000196: 5424 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
058419,000197:
058420,000198: 5425 15431 TCF PHASCHNG +3
058421,000199:
058422,000200: 5426 00004 PHASCHNG INHINT
058423,000201: 5427 35033 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
058424,000202: 5430 54066 TS TEMPSW2
058425,000203:
058426,000204: 5431 50002 NDX Q
058427,000205: 5432 30000 CA 0
058428,000206: 5433 24002 INCR Q
058429,000207: 5434 54065 TS TEMPSW
058430,000208: 5435 00006 EXTEND
058431,000209: 5436 35441 DCA ADRPCHN2 # OFF TO SWITCHED BANK
058432,000210: 5437 52006 DTCB
058433,000211:
058434,000212: 5440 E3,1400 EBANK= LST1
058435,000213: 5440 02451 20063 ADRPCHN2 2CADR PHSCHNG2
058436,000214:
058437,000215: 5442 22073 ONEORTWO LXCH TEMPBBCN
058438,000216: 5443 22006 LXCH BBANK
058439,000217: 5444 22073 LXCH TEMPBBCN
058440,000218:
058441,000219: 5445 75102 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
058442,000220: 5446 10000 CCS A
058443,000221: 5447 15510 TCF CHECKB # IT IS OF TYPE :B:
058444,000222:
058445,000223: 5450 30062 CA TEMPP
058446,000224: 5451 75025 MASK BIT7
058447,000225: 5452 10000 CCS A # SHALL WE USE THE OLD PRIORITY
058448,000226: 5453 15475 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
058449,000227:
058450,000228: 5454 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
058451,000229: 5455 31052 CA PHSPRDT1 -2
058452,000230: 5456 54070 TS TEMPPR
058453,000231:
058454,000232: 5457 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
058455,000233: 5460 75024 MASK BIT8
058456,000234: 5461 10000 CCS A
058457,000235: 5462 15501 TCF GETNEWNM
058458,000236:
058459,000237: 5463 30002 CA Q
058460,000238: 5464 54063 TS TEMPNM
058461,000239: 5465 30006 CA BB
058462,000240: 5466 00006 EXTEND # PICK UP USERS SUPERBANK
058463,000241: 5467 04007 ROR SUPERBNK
058464,000242: 5470 54064 TS TEMPBB
058465,000243:
058466,000244: 5471 35474 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
058467,000245: 5472 22073 LXCH TEMPBBCN
058468,000246: 5473 52006 DTCB
058469,000247:
058470,000248: 5474 02537 CON2ADR GENADR CON2
058471,000249:
058472,000250: 5475 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
058473,000251: 5476 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
058474,000252: 5477 24002 INCR Q # OBTAIN RETURN ADDRESS
058475,000253: 5500 15456 TCF CON1 -1
058476,000254:
058477,000255: 5501 00006 GETNEWNM EXTEND
058478,000256: 5502 50002 INDEX Q
058479,000257: 5503 30001 DCA 0
058480,000258: 5504 52064 DXCH TEMPNM
058481,000259: 5505 35032 CA TWO
058482,000260: 5506 26002 ADS Q # OBTAIN RETURN ADDRESS
058483,000261:
058484,000262: 5507 15471 TCF TOCON2
058485,000263:
058486,000264: 5510 5102 OCT14000 EQUALS PRIO14
058487,000265: 5510 0061 TEMPG EQUALS ITEMP1
058488,000266: 5510 0062 TEMPP EQUALS ITEMP2
058489,000267: 5510 0063 TEMPNM EQUALS ITEMP3
058490,000268: 5510 0064 TEMPBB EQUALS ITEMP4
058491,000269: 5510 0065 TEMPSW EQUALS ITEMP5
058492,000270: 5510 0066 TEMPSW2 EQUALS ITEMP6
058493,000271: 5510 0070 TEMPPR EQUALS RUPTREG1
058494,000272: 5510 0071 TEMPG2 EQUALS RUPTREG2
058495,000273: 5510 0072 TEMPP2 EQUALS RUPTREG3
058496,000274:
058497,000275: 5510 0073 TEMPBBCN EQUALS RUPTREG4
058498,000276: 5510 0000006 BB EQUALS BBANK
058499,000277:
058500,000278: 14,3763 BANK 14
058501,000279: 10,2000 SETLOC PHASETAB
058502,000280: 10,2000 BANK
058503,000281:
058504,000282: 10,2451 E3,1436 EBANK= PHSNAME1
058505,000283: 10,2451 COUNT 10/PHASE
058506,000284:
058507,000285: 10,2451 22073 PHSCHNG2 LXCH TEMPBBCN
058508,000286: 10,2452 30065 CA TEMPSW
058509,000287: 10,2453 75037 MASK OCT7
058510,000288: 10,2454 60000 DOUBLE
058511,000289: 10,2455 54061 TS TEMPG
058512,000290:
058513,000291: 10,2456 30065 CA TEMPSW
058514,000292: 10,2457 75106 MASK OCT17770
058515,000293: 10,2460 00006 EXTEND
058516,000294: 10,2461 75020 MP BIT12
058517,000295: 10,2462 54062 TS TEMPP
058518,000296:
058519,000297: 10,2463 30065 CA TEMPSW
058520,000298: 10,2464 74105 MASK OCT60000
058521,000299: 10,2465 56065 XCH TEMPSW
058522,000300: 10,2466 75102 MASK OCT14000
058523,000301: 10,2467 10000 CCS A
058524,000302: 10,2470 15442 TCF ONEORTWO
058525,000303:
058526,000304: 10,2471 30062 CA TEMPP # START STORING THE PHASE INFORMATION
058527,000305: 10,2472 50061 NDX TEMPG
058528,000306: 10,2473 54751 TS PHASE1 -2
058529,000307:
058530,000308: 10,2474 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
058531,000309: 10,2475 12511 TCF BELOW2 # IT:S A PHASCHNG
058532,000310:
058533,000311: 10,2476 12477 TCF +1 # IT:S A 2PHSCHNG
058534,000312: 10,2477 40072 CS TEMPP2
058535,000313: 10,2500 22072 LXCH TEMPP2
058536,000314: 10,2501 50071 NDX TEMPG2
058537,000315: 10,2502 52751 DXCH -PHASE1 -2
058538,000316:
058539,000317: 10,2503 10066 CCS TEMPSW2
058540,000318: 10,2504 12505 NOOP # CAN:T GET HERE
058541,000319: 10,2505 12511 TCF BELOW2
058542,000320:
058543,000321: 10,2506 40025 CS TIME1
058544,000322: 10,2507 50071 NDX TEMPG2
058545,000323: 10,2510 55051 TS TBASE1 -2
058546,000324:
058547,000325: 10,2511 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
058548,000326: 10,2512 12525 TCF BELOW3 # SET LONGBASE ONLY
058549,000327: 10,2513 12530 TCF BELOW4 # SET NEITHER
058550,000328:
058551,000329: 10,2514 40025 CS TIME1 # SET TBASE TO BEGIN WITH
058552,000330: 10,2515 50061 NDX TEMPG
058553,000331: 10,2516 55051 TS TBASE1 -2
058554,000332:
058555,000333: 10,2517 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
058556,000334: 10,2520 62523 AD BIT14COM
058557,000335: 10,2521 10000 CCS A
058558,000336: 10,2522 12523 NOOP # ***** CANT GET HERE *****
058559,000337: 10,2523 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
058560,000338: 10,2524 12530 TCF BELOW4 # NO WE NEED ONLY SET TBASE
058561,000339:
058562,000340: 10,2525 00006 BELOW3 EXTEND # SET LONGBASE
058563,000341: 10,2526 30025 DCA TIME2
058564,000342: 10,2527 53136 DXCH LONGBASE
058565,000343:
058566,000344: 10,2530 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
058567,000345: 10,2531 50061 NDX TEMPG
058568,000346: 10,2532 54750 TS -PHASE1 -2
058569,000347:
058570,000348: 10,2533 30002 CA Q
058571,000349: 10,2534 22073 LXCH TEMPBBCN
058572,000350: 10,2535 00003 RELINT
058573,000351: 10,2536 52006 DTCB
058574,000352: 10,2537 22073 CON2 LXCH TEMPBBCN
058575,000353: 10,2540 30062 CA TEMPP
058576,000354: 10,2541 50061 NDX TEMPG
058577,000355: 10,2542 54751 TS PHASE1 -2
058578,000356:
058579,000357: 10,2543 30070 CA TEMPPR
058580,000358: 10,2544 50061 NDX TEMPG
058581,000359: 10,2545 55052 TS PHSPRDT1 -2
058582,000360:
058583,000361: 10,2546 00006 EXTEND
058584,000362: 10,2547 30064 DCA TEMPNM
058585,000363: 10,2550 50061 NDX TEMPG
058586,000364: 10,2551 53435 DXCH PHSNAME1 -2
058587,000365:
058588,000366: 10,2552 12474 TCF BELOW1
058589,000367:
058590,000368: 5510 BLOCK 02
058591,000369: 4000 SETLOC FFTAG1
058592,000370: 4000 BANK
058593,000371:
058594,000372: 5510 COUNT 02/PHASE
058595,000373:
058596,000374: 5510 75020 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
058597,000375: 5511 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
058598,000376: 5512 15475 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
058599,000377:
058600,000378: 5513 15454 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
058601,000379:
058602,000380:
058603,000381:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc