Source Code
|
These source-code files are part of a reconstructed copy of Comanche 72, the
first release of the Apollo Guidance Computer (AGC) Command Module (CM) software
for Apollo 13.
They have been adapted from sources files created from a listing of Comanche 55.
These source files were updated to match binary dumps of a set of Comanche 67 rope modules.
They were then further modified by applying known changes between Comanche 67 and Comanche 72.
A binary dump of module B2 of Comanche 72, part number 2010802-021, was also used
to validate changes made to banks 05-13. The resulting code assembles to have identical
memory-bank checksums as those specified in NASA drawing 2021153G; this gives reasonably
high confidence that the changes that have been made are correct. In places where
ambiguity exists, this ambiguity is discussed in "## Reconstruction:" comments.
Since no contemporary listings of Comanche 72 are available as source material,
all comments and labels are approximate.
They have been taken from other AGC programs where possible, or, in some places, written
from scratch to match what we believe would have been in the original listing.
|
058693,000002: ## Copyright: Public domain.
058694,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
058695,000004: ## Purpose: A section of Comanche revision 072.
058696,000005: ## It is part of the reconstructed source code for the first
058697,000006: ## release of the software for the Command Module's (CM) Apollo
058698,000007: ## Guidance Computer (AGC) for Apollo 13. No original listings
058699,000008: ## of this program are available; instead, this file was recreated
058700,000009: ## from a printout of Comanche 055, binary dumps of a set of
058701,000010: ## Comanche 067 rope modules, and changelogs between Comanche 067
058702,000011: ## and 072. It has been adapted such that the resulting bugger words
058703,000012: ## exactly match those specified for Comanche 072 in NASA drawing
058704,000013: ## 2021153G, which gives relatively high confidence that the
058705,000014: ## reconstruction is correct.
058706,000015: ## Assembler: yaYUL
058707,000016: ## Contact: Ron Burkey <info@sandroid.org>.
058708,000017: ## Website: www.ibiblio.org/apollo/index.html
058709,000018: ## Mod history: 2024-05-13 MAS Created from Comanche 067.
058710,000019:
058711,000020: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
058712,000021:
058713,000022: 43,3736 COUNT 02/PHASE
058714,000023: 5370 BLOCK 02
058715,000024: 4000 SETLOC FFTAG1
058716,000025: 4000 BANK
058717,000026:
058718,000027: 5370 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
058719,000028: 5371 30000 CAF 0
058720,000029: 5372 24002 INCR Q
058721,000030:
058722,000031: 5373 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
058723,000032: 5374 35377 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
058724,000033: 5375 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
058725,000034: 5376 14720 TCF BANKJUMP # PUTS Q INTO A
058726,000035: 5377 20440 CADR SETUPDSP
058727,000036:
058728,000037: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
058729,000038:
058730,000039: 5400 50002 CHECKMM INDEX Q
058731,000040: 5401 40000 CS 0
058732,000041: 5402 61011 AD MODREG
058733,000042: 5403 00006 EXTEND
058734,000043: 5404 16710 BZF Q+2
058735,000044: 5405 16706 TCF Q+1 # NO MATCH
058736,000045:
058737,000046: 5406 6711 TCQ = Q+2 +1
058738,000047:
058739,000048: 14,3765 BANK 14
058740,000049: 10,2000 SETLOC PHASETAB
058741,000050: 10,2000 BANK
058742,000051:
058743,000052: 10,2440 COUNT 10/PHASE
058744,000053:
058745,000054: 10,2440 00004 SETUPDSP INHINT
058746,000055: 10,2441 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
058747,000056: 10,2442 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
058748,000057: 10,2443 05150 TC NOVAC # NEWMODEX
058749,000058: 10,2444 1011 EBANK= MODREG
058750,000059: 10,2444 03450 60102 2CADR DSPMMJOB
058751,000060:
058752,000061: 10,2446 52071 DXCH RUPTREG1
058753,000062: 10,2447 00003 RELINT
058754,000063: 10,2450 52006 DXCH Z # RETURN
058755,000064:
058756,000065: 10,2451 40,3450 DSPMMJOB EQUALS DSPMMJB
058757,000066:
058758,000067: 5406 BLOCK 02
058759,000068: 4000 SETLOC FFTAG1
058760,000069: 4000 BANK
058761,000070:
058762,000071: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
058763,000072: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
058764,000073: # TC PHASCHNG
058765,000074: # OCT XXXXX
058766,000075: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
058767,000076: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
058768,000077: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
058769,000078: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
058770,000079: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
058771,000080: # LONGCALL TO BE RESTARTED.
058772,000081: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
058773,000082:
058774,000083: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
058775,000084: # TL0 00P PPP PPP GGG ,
058776,000085: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
058777,000086: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
058778,000087: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
058779,000088: # IT IS SET TO 0. SOME EXAMPLES,
058780,000089: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
058781,000090: # OCT 00003 MAKING GROUP 3 INACTIVE
058782,000091:
058783,000092: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
058784,000093: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
058785,000094:
058786,000095: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
058787,000096: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
058788,000097: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
058789,000098: # LOCATION
058790,000099:
058791,000100: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
058792,000101: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
058793,000102: # LONGBASE WAS SET THIS SINGLE ENTRY
058794,000103: # SHOULD BE A LONGCALL)
058795,000104:
058796,000105: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
058797,000106: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
058798,000107: # LONGCALL TO BE RESTARTED
058799,000108:
058800,000109: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
058801,000110: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
058802,000111: # TL0 1AD XXX CJW GGG
058803,000112: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
058804,000113: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
058805,000114: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
058806,000115: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
058807,000116: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
058808,000117: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
058809,000118: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
058810,000119: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
058811,000120: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
058812,000121: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
058813,000122: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
058814,000123: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
058815,000124: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
058816,000125: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
058817,000126: # AD+3 ALSO GO TO AD+3
058818,000127:
058819,000128: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
058820,000129: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
058821,000130: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
058822,000131: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
058823,000132: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
058824,000133: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
058825,000134: # LOCATION AD+5
058826,000135:
058827,000136: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
058828,000137: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
058829,000138:
058830,000139: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
058831,000140: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
058832,000141: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
058833,000142: # TL1 DAP PPP PPP GGG
058834,000143: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
058835,000144: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
058836,000145: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
058837,000146: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
058838,000147: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
058839,000148: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
058840,000149: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
058841,000150: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
058842,000151: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
058843,000152: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
058844,000153: # AD+5 GO TO AD+5
058845,000154:
058846,000155: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
058847,000156: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
058848,000157: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
058849,000158: # BY MEANS OF GROUP 5
058850,000159: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
058851,000160:
058852,000161: # SUMMARY OF BITS
058853,000162: # TYPE A TL0 00P PPP PPP GGG
058854,000163: # TYPE B TL1 DAP PPP PPP GGG
058855,000164: # TYPE C TL0 1AD XXX CJW GGG
058856,000165:
058857,000166: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
058858,000167: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
058859,000168: # CALLS ARE MADE IN THE FOLLOWING MANNER,
058860,000169: # TC 2PHSCHNG
058861,000170: # OCT XXXXX
058862,000171: # OCT YYYYY
058863,000172: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
058864,000173: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
058865,000174: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
058866,000175: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
058867,000176: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
058868,000177: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
058869,000178: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
058870,000179: # AD+4 FOR GROUP 5 PHASE INFORMATION
058871,000180:
058872,000181: 5406 COUNT 02/PHASE
058873,000182:
058874,000183: 5406 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
058875,000184: 5407 50002 NDX Q
058876,000185: 5410 30000 CA 0
058877,000186: 5411 24002 INCR Q
058878,000187: 5412 54072 TS TEMPP2
058879,000188:
058880,000189: 5413 75037 MASK OCT7
058881,000190: 5414 60000 DOUBLE
058882,000191: 5415 54071 TS TEMPG2
058883,000192:
058884,000193: 5416 30072 CA TEMPP2
058885,000194: 5417 75106 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
058886,000195: 5420 00006 EXTEND
058887,000196: 5421 75020 MP BIT12
058888,000197: 5422 56072 XCH TEMPP2
058889,000198:
058890,000199: 5423 75015 MASK BIT15
058891,000200: 5424 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
058892,000201:
058893,000202: 5425 15431 TCF PHASCHNG +3
058894,000203:
058895,000204: 5426 00004 PHASCHNG INHINT
058896,000205: 5427 35033 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
058897,000206: 5430 54066 TS TEMPSW2
058898,000207:
058899,000208: 5431 50002 NDX Q
058900,000209: 5432 30000 CA 0
058901,000210: 5433 24002 INCR Q
058902,000211: 5434 54065 TS TEMPSW
058903,000212: 5435 00006 EXTEND
058904,000213: 5436 35441 DCA ADRPCHN2 # OFF TO SWITCHED BANK
058905,000214: 5437 52006 DTCB
058906,000215:
058907,000216: 5440 E3,1400 EBANK= LST1
058908,000217: 5440 02451 20063 ADRPCHN2 2CADR PHSCHNG2
058909,000218:
058910,000219: 5442 22073 ONEORTWO LXCH TEMPBBCN
058911,000220: 5443 22006 LXCH BBANK
058912,000221: 5444 22073 LXCH TEMPBBCN
058913,000222:
058914,000223: 5445 75102 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
058915,000224: 5446 10000 CCS A
058916,000225: 5447 15510 TCF CHECKB # IT IS OF TYPE :B:
058917,000226:
058918,000227: 5450 30062 CA TEMPP
058919,000228: 5451 75025 MASK BIT7
058920,000229: 5452 10000 CCS A # SHALL WE USE THE OLD PRIORITY
058921,000230: 5453 15475 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
058922,000231:
058923,000232: 5454 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
058924,000233: 5455 31052 CA PHSPRDT1 -2
058925,000234: 5456 54070 TS TEMPPR
058926,000235:
058927,000236: 5457 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
058928,000237: 5460 75024 MASK BIT8
058929,000238: 5461 10000 CCS A
058930,000239: 5462 15501 TCF GETNEWNM
058931,000240:
058932,000241: 5463 30002 CA Q
058933,000242: 5464 54063 TS TEMPNM
058934,000243: 5465 30006 CA BB
058935,000244: 5466 00006 EXTEND # PICK UP USERS SUPERBANK
058936,000245: 5467 04007 ROR SUPERBNK
058937,000246: 5470 54064 TS TEMPBB
058938,000247:
058939,000248: 5471 35474 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
058940,000249: 5472 22073 LXCH TEMPBBCN
058941,000250: 5473 52006 DTCB
058942,000251:
058943,000252: 5474 02537 CON2ADR GENADR CON2
058944,000253:
058945,000254: 5475 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
058946,000255: 5476 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
058947,000256: 5477 24002 INCR Q # OBTAIN RETURN ADDRESS
058948,000257: 5500 15456 TCF CON1 -1
058949,000258:
058950,000259: 5501 00006 GETNEWNM EXTEND
058951,000260: 5502 50002 INDEX Q
058952,000261: 5503 30001 DCA 0
058953,000262: 5504 52064 DXCH TEMPNM
058954,000263: 5505 35032 CA TWO
058955,000264: 5506 26002 ADS Q # OBTAIN RETURN ADDRESS
058956,000265:
058957,000266: 5507 15471 TCF TOCON2
058958,000267:
058959,000268: 5510 5102 OCT14000 EQUALS PRIO14
058960,000269: 5510 0061 TEMPG EQUALS ITEMP1
058961,000270: 5510 0062 TEMPP EQUALS ITEMP2
058962,000271: 5510 0063 TEMPNM EQUALS ITEMP3
058963,000272: 5510 0064 TEMPBB EQUALS ITEMP4
058964,000273: 5510 0065 TEMPSW EQUALS ITEMP5
058965,000274: 5510 0066 TEMPSW2 EQUALS ITEMP6
058966,000275: 5510 0070 TEMPPR EQUALS RUPTREG1
058967,000276: 5510 0071 TEMPG2 EQUALS RUPTREG2
058968,000277: 5510 0072 TEMPP2 EQUALS RUPTREG3
058969,000278:
058970,000279: 5510 0073 TEMPBBCN EQUALS RUPTREG4
058971,000280: 5510 0000006 BB EQUALS BBANK
058972,000281:
058973,000282: 14,3765 BANK 14
058974,000283: 10,2000 SETLOC PHASETAB
058975,000284: 10,2000 BANK
058976,000285:
058977,000286: 10,2451 E3,1436 EBANK= PHSNAME1
058978,000287: 10,2451 COUNT 10/PHASE
058979,000288:
058980,000289: 10,2451 22073 PHSCHNG2 LXCH TEMPBBCN
058981,000290: 10,2452 30065 CA TEMPSW
058982,000291: 10,2453 75037 MASK OCT7
058983,000292: 10,2454 60000 DOUBLE
058984,000293: 10,2455 54061 TS TEMPG
058985,000294:
058986,000295: 10,2456 30065 CA TEMPSW
058987,000296: 10,2457 75106 MASK OCT17770
058988,000297: 10,2460 00006 EXTEND
058989,000298: 10,2461 75020 MP BIT12
058990,000299: 10,2462 54062 TS TEMPP
058991,000300:
058992,000301: 10,2463 30065 CA TEMPSW
058993,000302: 10,2464 74105 MASK OCT60000
058994,000303: 10,2465 56065 XCH TEMPSW
058995,000304: 10,2466 75102 MASK OCT14000
058996,000305: 10,2467 10000 CCS A
058997,000306: 10,2470 15442 TCF ONEORTWO
058998,000307:
058999,000308: 10,2471 30062 CA TEMPP # START STORING THE PHASE INFORMATION
059000,000309: 10,2472 50061 NDX TEMPG
059001,000310: 10,2473 54751 TS PHASE1 -2
059002,000311:
059003,000312: 10,2474 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
059004,000313: 10,2475 12511 TCF BELOW2 # IT:S A PHASCHNG
059005,000314:
059006,000315: 10,2476 12477 TCF +1 # IT:S A 2PHSCHNG
059007,000316: 10,2477 40072 CS TEMPP2
059008,000317: 10,2500 22072 LXCH TEMPP2
059009,000318: 10,2501 50071 NDX TEMPG2
059010,000319: 10,2502 52751 DXCH -PHASE1 -2
059011,000320:
059012,000321: 10,2503 10066 CCS TEMPSW2
059013,000322: 10,2504 12505 NOOP # CAN:T GET HERE
059014,000323: 10,2505 12511 TCF BELOW2
059015,000324:
059016,000325: 10,2506 40025 CS TIME1
059017,000326: 10,2507 50071 NDX TEMPG2
059018,000327: 10,2510 55051 TS TBASE1 -2
059019,000328:
059020,000329: 10,2511 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
059021,000330: 10,2512 12525 TCF BELOW3 # SET LONGBASE ONLY
059022,000331: 10,2513 12530 TCF BELOW4 # SET NEITHER
059023,000332:
059024,000333: 10,2514 40025 CS TIME1 # SET TBASE TO BEGIN WITH
059025,000334: 10,2515 50061 NDX TEMPG
059026,000335: 10,2516 55051 TS TBASE1 -2
059027,000336:
059028,000337: 10,2517 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
059029,000338: 10,2520 62523 AD BIT14COM
059030,000339: 10,2521 10000 CCS A
059031,000340: 10,2522 12523 NOOP # ***** CANT GET HERE *****
059032,000341: 10,2523 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
059033,000342: 10,2524 12530 TCF BELOW4 # NO WE NEED ONLY SET TBASE
059034,000343:
059035,000344: 10,2525 00006 BELOW3 EXTEND # SET LONGBASE
059036,000345: 10,2526 30025 DCA TIME2
059037,000346: 10,2527 53136 DXCH LONGBASE
059038,000347:
059039,000348: 10,2530 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
059040,000349: 10,2531 50061 NDX TEMPG
059041,000350: 10,2532 54750 TS -PHASE1 -2
059042,000351:
059043,000352: 10,2533 30002 CA Q
059044,000353: 10,2534 22073 LXCH TEMPBBCN
059045,000354: 10,2535 00003 RELINT
059046,000355: 10,2536 52006 DTCB
059047,000356: 10,2537 22073 CON2 LXCH TEMPBBCN
059048,000357: 10,2540 30062 CA TEMPP
059049,000358: 10,2541 50061 NDX TEMPG
059050,000359: 10,2542 54751 TS PHASE1 -2
059051,000360:
059052,000361: 10,2543 30070 CA TEMPPR
059053,000362: 10,2544 50061 NDX TEMPG
059054,000363: 10,2545 55052 TS PHSPRDT1 -2
059055,000364:
059056,000365: 10,2546 00006 EXTEND
059057,000366: 10,2547 30064 DCA TEMPNM
059058,000367: 10,2550 50061 NDX TEMPG
059059,000368: 10,2551 53435 DXCH PHSNAME1 -2
059060,000369:
059061,000370: 10,2552 12474 TCF BELOW1
059062,000371:
059063,000372: 5510 BLOCK 02
059064,000373: 4000 SETLOC FFTAG1
059065,000374: 4000 BANK
059066,000375:
059067,000376: 5510 COUNT 02/PHASE
059068,000377:
059069,000378: 5510 75020 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
059070,000379: 5511 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
059071,000380: 5512 15475 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
059072,000381:
059073,000382: 5513 15454 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
059074,000383:
059075,000384:
059076,000385:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc