Source Code
|
These source-code files are part of a reconstructed copy of Corona 261, the
final, flown release of the Block I Command Module (CM) Apollo Guidance Computer
(AGC) software for the AS-202 mission.
They have been created via disassembly of binary dumps of the original core rope
memory modules actually flown on the mission, part numbers 1003733-171, 1003733-241,
1003733-191, 1003733-211, 1003733-221, and 1003733-241. The source code for the Apollo
4 and 6 software, Solarium 55, was used as a starting point, since it was directly
derived from Corona and (at least in theory) only minimally modified.
Since only binary dumps (rather than listings) of Corona are available as source material,
all comments and labels are approximate.
They have been taken from other AGC programs where possible, or, in some places, written
from scratch to match what we believe would have been in the original listing.
|
000020,000002: ## Copyright: Public domain.
000021,000003: ## Filename: ASSEMBLY_AND_OPERATION_INFORMATION.agc
000022,000004: ## Purpose: A section of Corona revision 261.
000023,000005: ## It is part of the source code for the Apollo Guidance Computer
000024,000006: ## (AGC) for AS-202. No original listings of this software are
000025,000007: ## available; instead, this file was created via disassembly of
000026,000008: ## the core rope modules actually flown on the mission.
000027,000009: ## Assembler: yaYUL
000028,000010: ## Contact: Ron Burkey <info@sandroid.org>.
000029,000011: ## Website: www.ibiblio.org/apollo/index.html
000030,000012: ## Mod history: 2023-05-27 MAS Created from Solarium 55.
000031,000013: ## 2023-06-17 MAS Updated for Corona.
000032,000014:
000033,000015:
000034,000016: # TABLE OF LOG CARDS (ALL LOG CARDS ARE TWO SPACED)
000035,000017:
000036,000018: # ASSEMBLY AND OPERATION INFORMATION
000037,000019: # ERASABLE ASSIGNMENTS
000038,000020: # INTERRUPT TRANSFER ROUTINES
000039,000021: # FIXED-FIXED INTERPRETER SECTION
000040,000022: # BANK 03 INTERPRETER SECTION
000041,000023: # EXECUTIVE
000042,000024: # WAITLIST
000043,000025: # RESTART CONTROL
000044,000026: # 202 RESTART TABLES AND ROUTINES
000045,000027: # FRESH START AND RESTART
000046,000028: # DOWN-TELEMETRY PROGRAM
000047,000029: # T4RUPT OUTPUT CONTROL PROGRAMS
000048,000030: # MODE SWITCHING AND MARK ROUTINES
000049,000031: # IMU COMPENSATION PACKAGE
000050,000032: # IRIG PULSE-TORQUING ROUTINES
000051,000033: # EXTENDED VERBS FOR MODING
000052,000034: # AGC SELF-CHECK
000053,000035: # INTER-BANK COMMUNICATION
000054,000036: # ALARM AND DISPLAY PROCEDURES
000055,000037: # ORBITAL INTEGRATION PROGRAM
000056,000038: # MIDCOURSE NAVIGATION GAME
000057,000039: # LATITUDE-LONGITUDE SUBROUTINES
000058,000040: # MIDCOURSE INITIALIZATION
000059,000041: # ORBITAL INTEGRATION FOR 202
000060,000042: # MEASUREMENT INCORPORATION
000061,000043: # B VECTOR ROUTINE
000062,000044: # PRELAUNCH ALIGNMENT PROGRAM
000063,000045: # INFLIGHT ALIGNMENT PROGRAM
000064,000046: # RTB OP CODES
000065,000047: # IMU PERFORMANCE TESTS 1
000066,000048: # IMU PERFORMANCE TESTS 2
000067,000049: # INFLIGHT ALIGNMENT SUBROUTINES
000068,000050: # KEYRUPT, UPRUPT, FRESH START
000069,000051: # PINBALL GAME BUTTONS AND LIGHTS
000070,000052: # 202 MISSION CONTROL PROGRAM
000071,000053: # POWERED FLIGHT SUBROUTINES
000072,000054: # DUMMY 202 INITIALISATION
000073,000055: # RE-ENTRY CONTROL
000074,000056: # AVERAGE G INTEGRATOR
000075,000057: # VERIFICATION ASSISTANCE PROGRAMS
000076,000058: # SUM-CHECK END OF RECORD MARKS
000077,000059:
000078,000060:
000079,000061: # TABLE OF ERROR CODES
000080,000062:
000081,000063:
000082,000064: # OPTICS SUB-SYSTEM
000083,000065:
000084,000066: # 00101 ZERO CDU SWITCH ALTERED BEFORE EXPIRATION OF 30 SECOND WAIT
000085,000067: # 00102 COMPUTER UNABLE TO ACHIEVE DESIRED OPTICS MODE
000086,000068: # 00103 SXT-ON SWITCH TURNED ON WITH OPTICS NOT IN ZERO CDU MODE
000087,000069: # 00104 NO VAC AREA AVAILABLE FOR MARKS
000088,000070: # 00105 INTERNAL MARKS REQUEST WITH MARK SYSTEM BUSY
000089,000071: # 00106 SXT-ON SWITCH NOT IN DESIRED STATE AT MARK TIME OR MARK WITH ALL REQUESTED MARKS ACCEPTED
000090,000072: # 00107 MARK ACCEPT WITH MARK SYSTEM NOT IN USE
000091,000073: # 00110 MARK ACCEPT WITH ALL REQUESTED MARKS ACCEPTED, OR NO MARKS SINCE INITIALIZATION OR LAST MARK ACCEPT
000092,000074:
000093,000075: # IMU SUB-SYSTEM
000094,000076:
000095,000077: # 00201 CDU ZERO SWITCH ALTERED BEFORE EXPIRATION OF 30 SECOND WAIT
000096,000078: # 00202 COMPUTER UNABLE TO ACHIEVE DESIRED MODE
000097,000079: # 00203 NO IMU MODE INDICATED TO COMPUTER
000098,000080: # 00204 MODE SWITCH WITH TRNSW IN COMPUTER CONTROL, BUT COMPUTER NOT COMMANDING
000099,000081:
000100,000082: # GENERAL MISSION PROGRAM ERRORS (ERROR RETURN ON IMUSTALL, ETC.)
000101,000083:
000102,000084: # 00301 CURTAINS PROGRAM
000103,000085:
000104,000086: # PROCEDURAL DIFFICULTY
000105,000087:
000106,000088: # 00401 DESIRED GIMBAL ANGLES YIELD GIMBAL LOCK (MGA GREATER THAN 60 DEGREES).
000107,000089: # 00402 STAR OUT OF FIELD OF VIEW
000108,000090: # 00403 STAR OUT OF FIELD OF VIEW
000109,000091:
000110,000092: # COMPUTER HARDWARE MALFUNCTIONS
000111,000093:
000112,000094: # 01101 RUPT2 OCCURRED
000113,000095: # 01102 AGC SELF TEST ERROR (Q IN SFAIL)
000114,000096: # 01103 UNUSED CCS BRANCH EXECUTED
000115,000097: # 01104 C-RELAY FAILED DURING C-RELAY TEST
000116,000098:
000117,000099: # LIST OVERFLOWS (ALL ABORTS)
000118,000100:
000119,000101: # 01201 EXECUTIVE OVERFLOW - NO VAC AREAS
000120,000102: # 01202 EXECUTIVE OVERFLOW - NO CORE SETS
000121,000103: # 01203 WAITLIST OVERFLOW - TOO MANY TASKS
000122,000104: # 01204 SLIGHT VARIATION OF 01203
000123,000105: # 01205 MASTER CONTROL OVERFLOW - TOO MANY JOBS WAITING
000124,000106: # 01206 KEYBOARD + DISPLAY WAITING LINE OVERFLOW
000125,000107: # 01207 NO VAC AREA FOR MARKS
000126,000108: # 01210 SOMETHING ALREADY WAITING IN IMUSTALL
000127,000109:
000128,000110: # INTERPRETER ERRORS
000129,000111:
000130,000112: # 01301 ARCCOS-ARCSIN INPUT ANGLE TOO LARGE
000131,000113: # 01302 SQRT CALLED WITH NEGATIVE ARGUMENT
000132,000114:
000133,000115: # DISPLAY ALARMS
000134,000116:
000135,000117: # 01401 (VG) INCREASING - LOSS OF CONTROL
000136,000118: # 01402 (DELV) TOO LOW - ENGINE NOT ON
000137,000119: # 01403 202 ABORT, WILL OVERSHOOT TARGET.
000138,000120: # 01404 202 ABORT, PRESENT SMA LESS THAN RE/2
000139,000121: # 01405 202 ABORT, COT SQ(GAMMA E) NEGATIVE.
000140,000122: # 01406 202 ABORT, FREE-FALL ANGLE EXEEDS ---
000141,000123: # 01407 COMMANDED CDUZ EXCEEDS 60 DEGREES
000142,000124:
000143,000125: # KEYBOARD AND DISPLAY PROGRAM
000144,000126:
000145,000127: # 01501 KEYBOARD AND DISPLAY ALARM DURING INTERNAL USE (NVSUB). ABORT
000146,000128:
000147,000129:
000148,000130: # VERB DEFINITIONS
000149,000131:
000150,000132:
000151,000133:
000152,000134: # REGULAR VERBS
000153,000135: # 01 DISPLAY OCTAL COMP 1 (R1)
000154,000136: # 02 DISPLAY OCTAL COMP 2 (R1)
000155,000137: # 03 DISPLAY OCTAL COMP 3 (R1)
000156,000138: # 04 DISPLAY OCTAL COMP 1,2 (R1,R2)
000157,000139: # 05 DISPLAY OCTAL COMP 1,2,3 (R1,R2,R3)
000158,000140: # 06 DECIMAL DISPLAY
000159,000141: # 07 DP DECIMAL DISPLAY (R1,R2)
000160,000142: # 10 REQUEST WAITLIST
000161,000143: # 11 MONITOR OCT COMP 1 (R1)
000162,000144: # 12 MONITOR OCT COMP 2 (R1)
000163,000145: # 13 MONITOR OCT COMP 3 (R1)
000164,000146: # 14 MONITOR OCT COMP 1,2 (R1)
000165,000147: # 15 MONITOR OCT COMP 1,2,3 (R1,R2,R3)
000166,000148: # 16 MONITOR DECIMAL
000167,000149: # 17 MONITOR DP DECIMAL (R1,R2)
000168,000150: # 20 REQUEST EXECUTIVE
000169,000151: # 21 LOAD COMP 1 (R1)
000170,000152: # 22 LOAD COMP 2 (R2)
000171,000153: # 23 LOAD COMP 3 (R3)
000172,000154: # 24 LOAD COMP 1,2 (R1,R2)
000173,000155: # 25 LOAD COMP 1,2,3 (R1,R2,R3)
000174,000156: # 26 SPARE
000175,000157: # 27 SPARE
000176,000158: # 30 SPARE
000177,000159: # 31 BANK DISPLAY
000178,000160: # 32 C(R2) INTO R3, C(R1) INTO R2
000179,000161: # 33 PROCEED WITHOUT DATA
000180,000162: # 34 TERMINATE CURRENT TEST OR LOAD REQUEST
000181,000163: # 35 RELEASE DISPLAY SYSTEM
000182,000164: # 36 FRESH START
000183,000165: # 37 CHANGE MAJOR MODE
000184,000166: # END OF REGULAR VERBS
000185,000167:
000186,000168:
000187,000169:
000188,000170: # EXTENDED VERBS
000189,000171: # 40 ZERO (USED WITH NOUN ICDU OR OCDU)
000190,000172: # 41 COARSE ALIGN (USED WITH NOUN ICDU OR OCDU)
000191,000173: # 42 FINE ALIGN IMU
000192,000174: # 43 LOCK IMU
000193,000175: # 44 SET IMU TO ATTITUDE CONTROL
000194,000176: # 45 SET IMU TO RE-ENTRY CONTROL
000195,000177: # 46 RETURN IMU TO COARSE ALIGN
000196,000178: # 47 OPTICAL TRACKER ON (NOT IN USE YET)
000197,000179: # 50 PLEASE PERFORM
000198,000180: # 51 PLEASE MARK
000199,000181: # 52 MARK REJECT (UNTIL BUTTON AVAILABLE)
000200,000182: # 53 FREE (USED WITH NOUN ICDU OR OCDU)
000201,000183: # 54 PULSE TORQUE GYROS
000202,000184: # 55 ALIGN TIME
000203,000185: # 56 PERFORM BANKSUM
000204,000186: # 57 DO SYSTEM TEST
000205,000187: # 60 PREPARE FOR STANDBY
000206,000188: # 61 RECOVER FROM STANDBY
000207,000189: # 62 ILLEGAL VERB
000208,000190: # 63 ILLEGAL VERB
000209,000191: # 64 ILLEGAL VERB
000210,000192: # 65 ILLEGAL VERB
000211,000193: # 66 ILLEGAL VERB
000212,000194: # 67 ILLEGAL VERB
000213,000195: # 70 ILLEGAL VERB
000214,000196: # 71 ILLEGAL VERB
000215,000197: # 72 ILLEGAL VERB
000216,000198: # 73 ILLEGAL VERB
000217,000199: # 74 ILLEGAL VERB
000218,000200: # 75 MANUAL I/O FOR FLIGHTS
000219,000201: # 76 DO RVT UPDATE
000220,000202: # 77 ABORT
000221,000203:
000222,000204:
000223,000205: # NORMAL NOUNS SCALE AND DECIMAL POINT
000224,000206: # 00 NOT IN USE
000225,000207: # 01 SPECIFY MACHINE ADDRESS (FRACTIONAL) (.XXXXX)
000226,000208: # 02 SPECIFY MACHINE ADDRESS (WHOLE) (XXXXX.)
000227,000209: # 03 SPECIFY MACHINE ADDRESS (DEGREES) (XXX.XXDEGREES)
000228,000210: # 04 SPECIFY MACHINE ADDRESS (HOURS) (XXX.XXHOURS)
000229,000211: # 05 SPECIFY MACHINE ADDRESS (SECONDS) (XXX.XXSECONDS)
000230,000212: # 06 SPECIFY MACHINE ADDRESS (GYRO DEGREES) (XX.XXXDEGREES)
000231,000213: # 07 SPECIFY MACHINE ADDRESS (Y OPT DEGREES) (XXX.XXDEG OR XX.XXXDEG)
000232,000214: # 10 SPARE
000233,000215: # 11 SPARE
000234,000216: # 12 SPARE
000235,000217: # 13 SPARE
000236,000218: # 14 SPARE
000237,000219: # 15 INCREMENT MACHINE ADDRESS (OCTAL ONLY)
000238,000220: # 16 TIME SECONDS (XXX.XXSECONDS)
000239,000221: # 17 TIME HOURS (XXX.XXHOURS)
000240,000222: # 20 ICDU (XXX.XXDEGREES)
000241,000223: # 21 PIPAS (XXXXX.PULSES)
000242,000224: # 22 NEW ANGLES I (XXX.XXDEGREES)
000243,000225: # 23 DELTA ANGLES I (XXX.XXDEGREES)
000244,000226: # 24 DELTA TIME (SECONDS) (XXX.XXSECONDS)
000245,000227: # 25 CHECKLIST (XXXXX.)
000246,000228: # 26 PRIO/DELAY (XXXXX.)
000247,000229: # 27 SELF TEST ON/OFF SWITCH (XXXXX.)
000248,000230: # 30 STAR NUMBERS (XXXXX.)
000249,000231: # 31 FAILREG, SFAIL, ERCOUNT (OCTAL ONLY)
000250,000232: # 32 DECISION TIME (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS = WEEKS))
000251,000233: # 33 EPHEMERIS TIME (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS = WEEKS))
000252,000234: # 34 MEASURED QUANTITY (MIDCOURSE) (XXXX.XKILOMETERS)
000253,000235: # 35 ROLL, PITCH, YAW (XXX.XXDEGREES)
000254,000236: # 36 LANDMARK DATA 1 (OCTAL ONLY)
000255,000237: # 37 LANDMARK DATA 2 (OCTAL ONLY)
000256,000238: # 40 VG FOR 202 (XXXX.X METERS/SEC)
000257,000239: # 41 SPARE
000258,000240: # 42 SPARE
000259,000241: # 43 SPARE
000260,000242: # 44 SPARE
000261,000243: # 45 SPARE
000262,000244: # 46 SPARE
000263,000245: # 47 SPARE
000264,000246: # 50 SPARE
000265,000247: # 51 SPARE
000266,000248: # 52 GYRO BIAS DRIFT (.BBXXXXXMILLIRAD/SEC)
000267,000249: # 53 GYRO INPUT AXIS ACCELERATION DRIFT (.BBXXXXX(MILLIRAD/SEC)/(CM/SEC SEC))
000268,000250: # 54 GYRO SPIN AXIS ACCELERATION DRIFT (.BBXXXXX(MILLIRAD/SEC)/(CM/SEC SEC))
000269,000251: # END OF NORMAL NOUNS
000270,000252:
000271,000253:
000272,000254: # MIXED NOUNS SCALE AND DECIMAL POINT
000273,000255: # 55 OCDU (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG)
000274,000256: # 56 UNCALLED MARK DATA (OCDU & TIME(SECONDS)) (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG, XXX.XXSEC)
000275,000257: # 57 NEW ANGLES OCDU (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG)
000276,000258: # 60 IMU MODE STATUS (IN3, WASKSET, OLDERR) (OCTAL ONLY)
000277,000259: # 61 TARGET AZIMUTH AND ELEVATION (XXX.XXDEG, XX.XXXDEG)
000278,000260: # 62 ICDUZ AND TIME (XXX.XXDEG, XXX.XXSEC)
000279,000261: # 63 OCDUX AND TIME (XXX.XXDEG, XXX.XXSEC)
000280,000262: # 64 OCDUY AND TIME (XXX.XXDEG OR XX.XXXDEG, XXX.XXSEC)
000281,000263: # 65 SAMPLED TIME (HOURS AND SECONDS) (XXX.XXHOURS, XXX.XXSEC)
000282,000264: # (FETCHED IN INTERRUPT)
000283,000265: # 66 SYSTEM TEST RESULTS (XXXXX., .XXXXX, XXXXX.)
000284,000266: # 67 DELTA GYRO ANGLES (XX.XXXDEG FOR EACH)
000285,000267: # 70 PIPA BIAS (X.XXXXCM/SEC SEC FOR EACH)
000286,000268: # 71 PIPA SCALE FACTOR ERROR (XXXXX.PARTS/MILLION FOR EACH)
000287,000269: # 72 DELTA POSITION (XXXX.XKILOMETERS FOR EACH)
000288,000270: # 73 DELTA VELOCITY (XXXX.XMETERS/SEC FOR EACH)
000289,000271: # 74 MEASUREMENT DATA (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS=WEEKS), XXXX.XKILOMETERS, XXXXX.
000290,000272: # 75 MEASUREMENT DEVIATIONS (MIDCOURSE) (XXXX.XKILOMETERS, XXXX,XMETERS/SEC, XXXX.XKILOMETERS)
000291,000273: # 76 POSITION VECTOR (XXXX.XKILOMETERS FOR EACH)
000292,000274: # 77 VELOCITY VECTOR (XXXX.XMETERS/SEC FOR EACH)
000293,000275:
000294,000276:
000295,000277: # MAJOR MODES FOR FLIGHT 202
000296,000278:
000297,000279:
000298,000280:
000299,000281: # 00 IDLING
000300,000282:
000301,000283:
000302,000284:
000303,000285: # 0X PRELAUNCH
000304,000286:
000305,000287: # 01 INITIALIZATION
000306,000288: # 02 GYROCOMPASSING
000307,000289: # 03 OPTICAL VERIFICATION
000308,000290: # 04 INERTIAL REFERENCE
000309,000291: # 05 VERTICAL ERECT. (COUNTING)
000310,000292: # 06 VERTICAL ERECT. (UNCONDITIONAL)
000311,000293:
000312,000294: # 07 SYSTEM TEST
000313,000295:
000314,000296:
000315,000297:
000316,000298: # 1X BOOSTER MONITOR
000317,000299:
000318,000300: # 11 FIRST STAGE BOOSTER MONITORING
000319,000301:
000320,000302: # 14 SIV-B BOOSTER MONITOR WITH TUMBLE MON. ON
000321,000303:
000322,000304:
000323,000305:
000324,000306: # 2X COASTING PHASE
000325,000307:
000326,000308: # 21 MANEUVER TO LOCAL VERTICAL
000327,000309: # 22 LOCAL VERTICAL
000328,000310: # 23 HOLD ATTITUDE
000329,000311: # 24 HOLD ATTITUDE WITH STATE VECTOR UPDATE ALLOWED.
000330,000312:
000331,000313: # 27 R, V, T UPDATING
000332,000314:
000333,000315:
000334,000316:
000335,000317: # 3X PRE-THRUSTING PHASES
000336,000318:
000337,000319: # 31 PRE-SPS1
000338,000320: # 32 PRE-SPS2
000339,000321: # 33 PRE-SPS3
000340,000322: # 34 PRE-SPS4
000341,000323:
000342,000324:
000343,000325:
000344,000326: # 4X THRUSTING PHASES
000345,000327:
000346,000328: # 41 SPS1
000347,000329: # 42 SPS2
000348,000330: # 43 SPS3
000349,000331: # 44 SPS4
000350,000332:
000351,000333:
000352,000334:
000353,000335: # 5X ALIGNMENT
000354,000336:
000355,000337:
000356,000338:
000357,000339: # 6X ENTRY
000358,000340:
000359,000341: # 61 CM/SM SEPARATION MANEUVER
000360,000342: # 62 PRE-ENTRY MANEUVER
000361,000343: # 63 INITIATE ENTRY STEERING
000362,000344: # 64 .05 G INDICATION
000363,000345: # 65 UP-CONTROL PHASE
000364,000346: # 66 BALLISTIC PHASE
000365,000347: # 67 FINAL PHASE
000366,000348:
000367,000349:
000368,000350:
000369,000351: # 7X ABORT PHASES
000370,000352:
000371,000353: # 71 POST-TUMBLE ATTITUDE RECOVERY
000372,000354: # 72 FREE-FALL ENTRY ABORT
000373,000355: # 73 ABORT BURN
000374,000356: # 74 TUMBLE ARREST BURN
000375,000357:
000376,000358: # 77 G+N FLUSHED
000377,000359:
000378,000360:
000379,000361: # JOB PRIORITIES FOR 202
000380,000362:
000381,000363: # PRIO37 = DOALARM
000382,000364: # PRIO36 = NWJOB
000383,000365: # PRIO35 = BIASONLY
000384,000366: # = 1/GYRO
000385,000367: # = ENEMA
000386,000368: # = MODE32
000387,000369: # PRIO33 = POSTBY3
000388,000370: # = CHARIN
000389,000371: # PRIO32 = MKVB50
000390,000372: # = MKVB51
000391,000373: # = REMKVB51
000392,000374: # PRIO31 = SPITGYRO
000393,000375: # = MONDO
000394,000376: # = FREDSPDO
000395,000377: # PRIO27 = SPITGYRO
000396,000378: # = ENEMA
000397,000379: # = S4BSMSEP
000398,000380: # PRIO25 = ABORTEST
000399,000381: # = S4BSMSEP
000400,000382: # = BEGIN202
000401,000383: # PRIO24 = LIFTOFF
000402,000384: # PRIO23 = MANUJOB
000403,000385: # = DOROLL
000404,000386: # PRIO22 = MONITJOB
000405,000387: # = TUMBJOB1
000406,000388: # = TUMBJOB
000407,000389: # PRIO21 = CGJOB
000408,000390: # PRIO20 = TOP1
000409,000391: # = TSELECT
000410,000392: # = PRAWAKE
000411,000393: # = STARTPL2
000412,000394: # = GYRDRFT2
000413,000395: # = CDUXJOB
000414,000396: # PRIO16 = SERVICER
000415,000397: # = ENTRYTOP
000416,000398: # PRIO15 = SMOOTHER
000417,000399: # PRIO14 = CHKOPT
000418,000400: # = UPTHETA1
000419,000401: # PRIO13 = VERTIJOB
000420,000402: # PRIO12 = TARGJOB
000421,000403: # = VERTINIT
000422,000404: # = ATTIJOB
000423,000405: # = ATTIJOB1 -1
000424,000406: # = ATTIJOB2
000425,000407: # = SEPMANU
000426,000408: # = ENTAJOB
000427,000409: # PRIO10 = ROLLJOB
000428,000410: # PRIO7 = MODE23
000429,000411: # = MODE44
000430,000412: # PRIO6 = UPJOB
|
|
MAS 2023: The following two jobs in MIDCOURSE NAVIGATION GAME have unknown names, and have not yet
been given "new" names via reverse-engineering.
|
000433,000415: # = U24,6454
000434,000416: # = U24,6514
000435,000417: # PRIO5 = MONITJOB
000436,000418: # = MARKDISP
000437,000419: # = STRTMID2
000438,000420: # = MIDRSTRT
000439,000421: # PRIO2 = FXFXCHK
End of include-file ASSEMBLY_AND_OPERATION_INFORMATION.agc. Parent file is MAIN.agc