Source Code
|
These source-code files are part of a reconstructed copy of Luminary 69/2,
the flown, final release of the Apollo 10 Lunar Module (LM) Apollo Guidance Computer (AGC) software.
The reconstruction is based on the source code of Luminary 69 — i.e., the
initial, unflown version, "revision 0" — of which
a contemporary listing was available. The code was then updated by incorporating the
differences between Luminary 69 and Luminary 69/2, known from other contemporary
documentation. The only such difference is the implementation in
Luminary 69/2 of the "R-2 Lunar Potential Model", the source code for which was taken
from program Luminary 99/1 (Apollo 11 LM), of which a contemporary listing was also available.
Finally, the now-reconstructed Luminary 69/2 was then validated by assembling it to
executable form and verifying that its memory banks had the correct checksums,
known from still other contemporary documentation.
Note that page numbers in the reconstructed code match those in the original Luminary 69
program listing, or in the ORBITAL INTEGRATION log section, in Luminary 99/1. Page numbers
would certainly differ somewhat in a contemporary Luminary 69/2 listing.
Moreover, annotations that were not present in the contemporary source code have been added
to the reconstructed code to justify each change in Luminary 69/2 relative to
Luminary 69. Here's a guide to the Apollo documentation referenced in those annotations:
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
055628,000002: ## Copyright: Public domain.
055629,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
055630,000004: ## Purpose: A section of LUM69 revision 2.
055631,000005: ## It is part of the reconstructed source code for the flown
055632,000006: ## version of the flight software for the Lunar Module's (LM)
055633,000007: ## Apollo Guidance Computer (AGC) for Apollo 10. The code has
055634,000008: ## been recreated from a copy of Luminary revsion 069, using
055635,000009: ## changes present in Luminary 099 which were described in
055636,000010: ## Luminary memos 75 and 78. The code has been adapted such
055637,000011: ## that the resulting bugger words exactly match those specified
055638,000012: ## for LUM69 revision 2 in NASA drawing 2021152B, which gives
055639,000013: ## relatively high confidence that the reconstruction is correct.
055640,000014: ## Reference: pp. 1288-1296
055641,000015: ## Assembler: yaYUL
055642,000016: ## Contact: Ron Burkey <info@sandroid.org>.
055643,000017: ## Website: www.ibiblio.org/apollo/index.html
055644,000018: ## Mod history: 2019-07-27 MAS Created from Luminary 69.
055645,000019:
|
|
Page 1288
|
055647,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
055648,000022:
055649,000023: 43,3732 COUNT* $$/PHASE
055650,000024: 5311 BLOCK 02
055651,000025: 4000 SETLOC FFTAG1
055652,000026: 4000 BANK
055653,000027:
055654,000028: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
055655,000029: 5312 30000 CAF 0
055656,000030: 5313 24002 INCR Q
055657,000031:
055658,000032: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
055659,000033: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
055660,000034: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
055661,000035: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
055662,000036: 5320 20071 CADR SETUPDSP
055663,000037:
055664,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
055665,000039:
055666,000040: 5321 50002 CHECKMM INDEX Q
055667,000041: 5322 40000 CS 0
055668,000042: 5323 61011 AD MODREG
055669,000043: 5324 00006 EXTEND
055670,000044: 5325 16740 BZF Q+2
055671,000045: 5326 16736 TCF Q+1 # NO MATCH
055672,000046:
055673,000047: 5327 6741 TCQ = Q+2 +1
055674,000048:
055675,000049: 14,3711 BANK 14
055676,000050: 10,2000 SETLOC PHASETAB
055677,000051: 10,2000 BANK
055678,000052:
055679,000053: 10,2071 COUNT* $$/PHASE
055680,000054: 10,2071 00004 SETUPDSP INHINT
055681,000055: 10,2072 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
055682,000056: 10,2073 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
055683,000057: 10,2074 05072 TC NOVAC # NEWMODE X
055684,000058: 10,2075 1011 EBANK= MODREG
055685,000059: 10,2075 03532 60102 2CADR DSPMMJOB
055686,000060:
055687,000061: 10,2077 52071 DXCH RUPTREG1
055688,000062: 10,2100 00003 RELINT
055689,000063: 10,2101 52006 DXCH Z # RETURN
055690,000064:
055691,000065: 10,2102 40,3532 DSPMMJOB EQUALS DSPMMJB
055692,000066:
055693,000067: 5327 BLOCK 02
055694,000068: 4000 SETLOC FFTAG1
055695,000069: 4000 BANK
055696,000070:
|
|
Page 1289
|
055698,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
055699,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
055700,000074: # TC PHASCHNG
055701,000075: # OCT XXXXX
055702,000076: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
055703,000077: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
055704,000078: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
055705,000079: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
055706,000080: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
055707,000081: # LONGCALL TO BE RESTARTED.
055708,000082: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
055709,000083:
055710,000084: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
055711,000085: # TL0 00P PPP PPP GGG ,
055712,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
055713,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
055714,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
055715,000089: # IT IS SET TO 0. SOME EXAMPLES,
055716,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
055717,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
055718,000092:
055719,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
055720,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
055721,000095:
055722,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
055723,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
055724,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
055725,000099: # LOCATION
055726,000100: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
055727,000101: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
055728,000102: # LONGBASE WAS SET THIS SINGLE ENTRY
055729,000103: # SHOULD BE A LONGCALL)
055730,000104:
055731,000105: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
055732,000106: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
055733,000107: # LONGCALL TO BE RESTARTED
055734,000108:
055735,000109: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
055736,000110: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
055737,000111: # TL0 1AD XXX CJW GGG
055738,000112: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
055739,000113: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
055740,000114: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1290
|
055742,000116: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
055743,000117: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
055744,000118: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
055745,000119: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
055746,000120: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
055747,000121: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
055748,000122: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
055749,000123: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
055750,000124: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
055751,000125: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
055752,000126: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
055753,000127: # AD+3 ALSO GO TO AD+3
055754,000128:
055755,000129: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
055756,000130: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
055757,000131: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
055758,000132: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
055759,000133: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
055760,000134: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
055761,000135: # LOCATION AD+5
055762,000136:
055763,000137: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
055764,000138: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
055765,000139:
055766,000140: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
055767,000141: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
055768,000142: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
055769,000143: # TL1 DAP PPP PPP GGG
055770,000144: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
055771,000145: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
055772,000146: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
055773,000147: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
055774,000148: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
055775,000149: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
055776,000150: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
055777,000151: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
055778,000152: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
055779,000153: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
055780,000154: # AD+5 GO TO AD+5
055781,000155:
055782,000156: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
055783,000157: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
055784,000158: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
055785,000159: # BY MEANS OF GROUP 5
|
|
Page 1291
|
055787,000161: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
055788,000162:
055789,000163: # SUMMARY OF BITS
055790,000164: # TYPE A TL0 00P PPP PPP GGG
055791,000165: # TYPE B TL1 DAP PPP PPP GGG
055792,000166: # TYPE C TL0 1AD XXX CJW GGG
055793,000167:
|
|
Page 1292
|
055795,000169: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
055796,000170: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
055797,000171: # CALLS ARE MADE IN THE FOLLOWING MANNER,
055798,000172: # TC 2PHSCHNG
055799,000173: # OCT XXXXX
055800,000174: # OCT YYYYY
055801,000175: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
055802,000176: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
055803,000177: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
055804,000178: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
055805,000179: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
055806,000180: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
055807,000181: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
055808,000182: # AD+4 FOR GROUP 5 PHASE INFORMATION
055809,000183:
055810,000184: 5327 COUNT* $$/PHASE
055811,000185: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
055812,000186: 5330 50002 NDX Q
055813,000187: 5331 30000 CA 0
055814,000188: 5332 24002 INCR Q
055815,000189: 5333 54072 TS TEMPP2
055816,000190:
055817,000191: 5334 74757 MASK OCT7
055818,000192: 5335 60000 DOUBLE
055819,000193: 5336 54071 TS TEMPG2
055820,000194:
055821,000195: 5337 30072 CA TEMPP2
055822,000196: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
055823,000197: 5341 00006 EXTEND
055824,000198: 5342 74740 MP BIT12
055825,000199: 5343 56072 XCH TEMPP2
055826,000200:
055827,000201: 5344 74735 MASK BIT15
055828,000202: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
055829,000203:
055830,000204: 5346 50002 INDEX Q
055831,000205: 5347 30000 CA 0
055832,000206: 5350 24002 INCR Q
055833,000207: 5351 54065 TS TEMPSW
055834,000208:
055835,000209: 5352 15363 TCF PHASJUMP
055836,000210:
055837,000211: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
055838,000212: 5354 50002 INDEX Q
055839,000213: 5355 30000 CA 0
055840,000214: 5356 24002 INCR Q
055841,000215: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1293
|
055843,000217: 5360 54065 TS TEMPSW
055844,000218: 5361 34753 CA ONE
055845,000219: 5362 54066 TS TEMPSW2
055846,000220: 5363 00006 PHASJUMP EXTEND
055847,000221: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
055848,000222: 5365 52006 DTCB
055849,000223:
055850,000224: 5366 E3,1400 EBANK= LST1
055851,000225: 5366 02102 20103 ADRPCHN2 2CADR PHSCHNG2
055852,000226:
055853,000227: 5370 22073 ONEORTWO LXCH TEMPBBCN
055854,000228: 5371 22006 LXCH BBANK
055855,000229: 5372 22073 LXCH TEMPBBCN
055856,000230:
055857,000231: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
055858,000232: 5374 10000 CCS A
055859,000233: 5375 17747 TCF CHECKB # IT IS OF TYPE :B:
055860,000234:
055861,000235: 5376 30062 CA TEMPP
055862,000236: 5377 74745 MASK BIT7
055863,000237: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
055864,000238: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
055865,000239:
055866,000240: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
055867,000241: 5403 31052 CA PHSPRDT1 -2
055868,000242: 5404 54070 TS TEMPPR
055869,000243:
055870,000244: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
055871,000245: 5406 74744 MASK BIT8
055872,000246: 5407 10000 CCS A
055873,000247: 5410 15427 TCF GETNEWNM
055874,000248:
055875,000249: 5411 30002 CA Q
055876,000250: 5412 54063 TS TEMPNM
055877,000251: 5413 30006 CA BB
055878,000252: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
055879,000253: 5415 04007 ROR SUPERBNK
055880,000254: 5416 54064 TS TEMPBB
055881,000255:
055882,000256: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
055883,000257: 5420 22073 LXCH TEMPBBCN
055884,000258: 5421 52006 DTCB
055885,000259:
055886,000260: 5422 02170 CON2ADR GENADR CON2
055887,000261:
055888,000262: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
055889,000263: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
055890,000264: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1294
|
055892,000266: 5426 15404 TCF CON1 -1
055893,000267:
055894,000268: 5427 00006 GETNEWNM EXTEND
055895,000269: 5430 50002 INDEX Q
055896,000270: 5431 30001 DCA 0
055897,000271: 5432 52064 DXCH TEMPNM
055898,000272: 5433 34752 CA TWO
055899,000273: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
055900,000274:
055901,000275: 5435 15417 TCF TOCON2
055902,000276:
055903,000277: 5436 5024 OCT14000 EQUALS PRIO14
055904,000278: 5436 0061 TEMPG EQUALS ITEMP1
055905,000279: 5436 0062 TEMPP EQUALS ITEMP2
055906,000280: 5436 0063 TEMPNM EQUALS ITEMP3
055907,000281: 5436 0064 TEMPBB EQUALS ITEMP4
055908,000282: 5436 0065 TEMPSW EQUALS ITEMP5
055909,000283: 5436 0066 TEMPSW2 EQUALS ITEMP6
055910,000284: 5436 0070 TEMPPR EQUALS RUPTREG1
055911,000285: 5436 0071 TEMPG2 EQUALS RUPTREG2
055912,000286: 5436 0072 TEMPP2 EQUALS RUPTREG3
055913,000287:
055914,000288: 5436 0073 TEMPBBCN EQUALS RUPTREG4
055915,000289: 5436 0000006 BB EQUALS BBANK
055916,000290:
055917,000291: 14,3711 BANK 14
055918,000292: 10,2000 SETLOC PHASETAB
055919,000293: 10,2000 BANK
055920,000294:
055921,000295: 10,2102 E3,1436 EBANK= PHSNAME1
055922,000296: 10,2102 COUNT* $$/PHASE
055923,000297: 10,2102 22073 PHSCHNG2 LXCH TEMPBBCN
055924,000298: 10,2103 30065 CA TEMPSW
055925,000299: 10,2104 74757 MASK OCT7
055926,000300: 10,2105 60000 DOUBLE
055927,000301: 10,2106 54061 TS TEMPG
055928,000302:
055929,000303: 10,2107 30065 CA TEMPSW
055930,000304: 10,2110 75030 MASK OCT17770
055931,000305: 10,2111 00006 EXTEND
055932,000306: 10,2112 74740 MP BIT12
055933,000307: 10,2113 54062 TS TEMPP
055934,000308:
055935,000309: 10,2114 30065 CA TEMPSW
055936,000310: 10,2115 74101 MASK OCT60000
055937,000311: 10,2116 56065 XCH TEMPSW
055938,000312: 10,2117 75024 MASK OCT14000
055939,000313: 10,2120 10000 CCS A
|
|
Page 1295
|
055941,000315: 10,2121 15370 TCF ONEORTWO
055942,000316:
055943,000317: 10,2122 30062 CA TEMPP # START STORING THE PHASE INFORMATION
055944,000318: 10,2123 50061 NDX TEMPG
055945,000319: 10,2124 54751 TS PHASE1 -2
055946,000320:
055947,000321: 10,2125 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
055948,000322: 10,2126 12142 TCF BELOW2 # IT:S A PHASCHNG
055949,000323:
055950,000324: 10,2127 12130 TCF +1 # IT:S A 2PHSCHNG
055951,000325: 10,2130 40072 CS TEMPP2
055952,000326: 10,2131 22072 LXCH TEMPP2
055953,000327: 10,2132 50071 NDX TEMPG2
055954,000328: 10,2133 52751 DXCH -PHASE1 -2
055955,000329:
055956,000330: 10,2134 10066 CCS TEMPSW2
055957,000331: 10,2135 12136 NOOP # CAN:T GET HERE
055958,000332: 10,2136 12142 TCF BELOW2
055959,000333:
055960,000334: 10,2137 40025 CS TIME1
055961,000335: 10,2140 50071 NDX TEMPG2
055962,000336: 10,2141 55051 TS TBASE1 -2
055963,000337:
055964,000338: 10,2142 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
055965,000339: 10,2143 12156 TCF BELOW3 # SET LONGBASE ONLY
055966,000340: 10,2144 12161 TCF BELOW4 # SET NEITHER
055967,000341:
055968,000342: 10,2145 40025 CS TIME1 # SET TBASE TO BEGIN WITH
055969,000343: 10,2146 50061 NDX TEMPG
055970,000344: 10,2147 55051 TS TBASE1 -2
055971,000345:
055972,000346: 10,2150 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
055973,000347: 10,2151 62154 AD BIT14COM
055974,000348: 10,2152 10000 CCS A
055975,000349: 10,2153 12154 NOOP # ***** CANT GET HERE *****
055976,000350: 10,2154 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
055977,000351: 10,2155 12161 TCF BELOW4 # NO WE NEED ONLY SET TBASE
055978,000352:
055979,000353: 10,2156 00006 BELOW3 EXTEND # SET LONGBASE
055980,000354: 10,2157 30025 DCA TIME2
055981,000355: 10,2160 53152 DXCH LONGBASE
055982,000356:
055983,000357: 10,2161 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
055984,000358: 10,2162 50061 NDX TEMPG
055985,000359: 10,2163 54750 TS -PHASE1 -2
055986,000360:
055987,000361: 10,2164 30002 CA Q
055988,000362: 10,2165 22073 LXCH TEMPBBCN
055989,000363: 10,2166 00003 RELINT
055990,000364: 10,2167 52006 DTCB
|
|
Page 1296
|
055992,000366: 10,2170 22073 CON2 LXCH TEMPBBCN
055993,000367:
055994,000368: 10,2171 30062 CA TEMPP
055995,000369: 10,2172 50061 NDX TEMPG
055996,000370: 10,2173 54751 TS PHASE1 -2
055997,000371:
055998,000372: 10,2174 30070 CA TEMPPR
055999,000373: 10,2175 50061 NDX TEMPG
056000,000374: 10,2176 55052 TS PHSPRDT1 -2
056001,000375:
056002,000376: 10,2177 00006 EXTEND
056003,000377: 10,2200 30064 DCA TEMPNM
056004,000378: 10,2201 50061 NDX TEMPG
056005,000379: 10,2202 53435 DXCH PHSNAME1 -2
056006,000380:
056007,000381: 10,2203 12125 TCF BELOW1
056008,000382:
056009,000383: 7747 BLOCK 03
056010,000384: 6000 SETLOC FFTAG6
056011,000385: 6000 BANK
056012,000386:
056013,000387: 7747 COUNT* $$/PHASE
056014,000388: 7747 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
056015,000389: 7750 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
056016,000390: 7751 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
056017,000391:
056018,000392: 7752 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
056019,000393:
056020,000394:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc