Source Code
|
These source-code files are part of a reconstructed copy of Luminary 96, the
original release of the Apollo 11 Lunar Module (LM) Apollo Guidance Computer
(AGC) software.
The reconstruction began with reconstructed source code for Luminary 97. Changes
between revisions 96 and 97 were backed out, as described by anomal report LNY-59.
transcribed from a digitized copy of that program. The reconstruction was
verified by matching memory-bank checksums to those listed in drawing 2021152D.
Note that page numbers in the reconstructed code match those on the Luminary 099
revision 001 printout, although the added code would likely have changed page
numbers for a real Luminary 96 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054314,000002: ## Copyright: Public domain.
054315,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054316,000004: ## Purpose: A section of Luminary revision 96.
054317,000005: ## It is part of the reconstructed source code for the
054318,000006: ## original release of the flight software for the Lunar
054319,000007: ## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 11.
054320,000008: ## The code has been recreated from a previously reconstructed
054321,000009: ## copy of Luminary 97 by undoing changes described in anomaly
054322,000010: ## report LNY-59. The code has been adapted such that the
054323,000011: ## resulting bugger words exactly match those specified for
054324,000012: ## Luminary 96 in NASA drawing 2021152D, which gives relatively
054325,000013: ## high confidence that the reconstruction is correct.
054326,000014: ## Reference: pp. 1294-1302
054327,000015: ## Assembler: yaYUL
054328,000016: ## Contact: Ron Burkey <info@sandroid.org>.
054329,000017: ## Website: www.ibiblio.org/apollo/index.html
054330,000018: ## Mod history: 2019-08-04 MAS Created from Luminary 97.
054331,000019:
|
|
Page 1294
|
054333,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054334,000022:
054335,000023: 43,3724 COUNT* $$/PHASE
054336,000024: 5311 BLOCK 02
054337,000025: 4000 SETLOC FFTAG1
054338,000026: 4000 BANK
054339,000027:
054340,000028: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054341,000029: 5312 30000 CAF 0
054342,000030: 5313 24002 INCR Q
054343,000031:
054344,000032: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054345,000033: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054346,000034: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054347,000035: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054348,000036: 5320 20213 CADR SETUPDSP
054349,000037:
054350,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054351,000039:
054352,000040: 5321 50002 CHECKMM INDEX Q
054353,000041: 5322 40000 CS 0
054354,000042: 5323 61011 AD MODREG
054355,000043: 5324 00006 EXTEND
054356,000044: 5325 16741 BZF Q+2
054357,000045: 5326 16737 TCF Q+1 # NO MATCH
054358,000046:
054359,000047: 5327 6742 TCQ = Q+2 +1
054360,000048:
054361,000049: 14,3774 BANK 14
054362,000050: 10,2000 SETLOC PHASETAB
054363,000051: 10,2000 BANK
054364,000052:
054365,000053: 10,2213 COUNT* $$/PHASE
054366,000054: 10,2213 00004 SETUPDSP INHINT
054367,000055: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054368,000056: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054369,000057: 10,2216 05072 TC NOVAC # NEWMODE X
054370,000058: 10,2217 1011 EBANK= MODREG
054371,000059: 10,2217 03534 60102 2CADR DSPMMJOB
054372,000060:
054373,000061: 10,2221 52071 DXCH RUPTREG1
054374,000062: 10,2222 00003 RELINT
054375,000063: 10,2223 52006 DXCH Z # RETURN
054376,000064:
054377,000065: 10,2224 40,3534 DSPMMJOB EQUALS DSPMMJB
054378,000066:
054379,000067: 5327 BLOCK 02
054380,000068: 4000 SETLOC FFTAG1
054381,000069: 4000 BANK
054382,000070:
|
|
Page 1295
|
054384,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054385,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054386,000074: # TC PHASCHNG
054387,000075: # OCT XXXXX
054388,000076: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054389,000077: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054390,000078: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054391,000079: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054392,000080: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054393,000081: # LONGCALL TO BE RESTARTED.
054394,000082: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054395,000083:
054396,000084: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054397,000085: # TL0 00P PPP PPP GGG ,
054398,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054399,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054400,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054401,000089: # IT IS SET TO 0. SOME EXAMPLES,
054402,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054403,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
054404,000092:
054405,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054406,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054407,000095:
054408,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054409,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054410,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054411,000099: # LOCATION
054412,000100:
054413,000101: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054414,000102: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054415,000103: # LONGBASE WAS SET THIS SINGLE ENTRY
054416,000104: # SHOULD BE A LONGCALL)
054417,000105:
054418,000106: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054419,000107: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054420,000108: # LONGCALL TO BE RESTARTED
054421,000109:
054422,000110: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054423,000111: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054424,000112: # TL0 1AD XXX CJW GGG
054425,000113: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054426,000114: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054427,000115: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1296
|
054429,000117: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054430,000118: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054431,000119: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054432,000120: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054433,000121: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054434,000122: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054435,000123: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054436,000124: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054437,000125: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054438,000126: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054439,000127: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054440,000128: # AD+3 ALSO GO TO AD+3
054441,000129:
054442,000130: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054443,000131: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054444,000132: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054445,000133: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054446,000134: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054447,000135: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054448,000136: # LOCATION AD+5
054449,000137:
054450,000138: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054451,000139: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054452,000140:
054453,000141: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054454,000142: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054455,000143: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054456,000144: # TL1 DAP PPP PPP GGG
054457,000145: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054458,000146: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054459,000147: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054460,000148: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054461,000149: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054462,000150: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054463,000151: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054464,000152: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054465,000153: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054466,000154: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054467,000155: # AD+5 GO TO AD+5
054468,000156:
054469,000157: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054470,000158: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054471,000159: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054472,000160: # BY MEANS OF GROUP 5
|
|
Page 1297
|
054474,000162: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054475,000163:
054476,000164: # SUMMARY OF BITS
054477,000165: # TYPE A TL0 00P PPP PPP GGG
054478,000166: # TYPE B TL1 DAP PPP PPP GGG
054479,000167: # TYPE C TL0 1AD XXX CJW GGG
054480,000168:
|
|
Page 1298
|
054482,000170: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054483,000171: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054484,000172: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054485,000173: # TC 2PHSCHNG
054486,000174: # OCT XXXXX
054487,000175: # OCT YYYYY
054488,000176: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054489,000177: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054490,000178: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054491,000179: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054492,000180: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054493,000181: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054494,000182: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054495,000183: # AD+4 FOR GROUP 5 PHASE INFORMATION
054496,000184:
054497,000185: 5327 COUNT* $$/PHASE
054498,000186: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054499,000187: 5330 50002 NDX Q
054500,000188: 5331 30000 CA 0
054501,000189: 5332 24002 INCR Q
054502,000190: 5333 54072 TS TEMPP2
054503,000191:
054504,000192: 5334 74757 MASK OCT7
054505,000193: 5335 60000 DOUBLE
054506,000194: 5336 54071 TS TEMPG2
054507,000195:
054508,000196: 5337 30072 CA TEMPP2
054509,000197: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054510,000198: 5341 00006 EXTEND
054511,000199: 5342 74740 MP BIT12
054512,000200: 5343 56072 XCH TEMPP2
054513,000201:
054514,000202: 5344 74735 MASK BIT15
054515,000203: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054516,000204:
054517,000205: 5346 50002 INDEX Q
054518,000206: 5347 30000 CA 0
054519,000207: 5350 24002 INCR Q
054520,000208: 5351 54065 TS TEMPSW
054521,000209:
054522,000210: 5352 15363 TCF PHASJUMP
054523,000211:
054524,000212: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054525,000213: 5354 50002 INDEX Q
054526,000214: 5355 30000 CA 0
054527,000215: 5356 24002 INCR Q
054528,000216: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1299
|
054530,000218: 5360 54065 TS TEMPSW
054531,000219: 5361 34753 CA ONE
054532,000220: 5362 54066 TS TEMPSW2
054533,000221: 5363 00006 PHASJUMP EXTEND
054534,000222: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054535,000223: 5365 52006 DTCB
054536,000224:
054537,000225: 5366 E3,1400 EBANK= LST1
054538,000226: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054539,000227:
054540,000228: 5370 22073 ONEORTWO LXCH TEMPBBCN
054541,000229: 5371 22006 LXCH BBANK
054542,000230: 5372 22073 LXCH TEMPBBCN
054543,000231:
054544,000232: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054545,000233: 5374 10000 CCS A
054546,000234: 5375 17750 TCF CHECKB # IT IS OF TYPE :B:
054547,000235:
054548,000236: 5376 30062 CA TEMPP
054549,000237: 5377 74745 MASK BIT7
054550,000238: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054551,000239: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054552,000240:
054553,000241: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054554,000242: 5403 31052 CA PHSPRDT1 -2
054555,000243: 5404 54070 TS TEMPPR
054556,000244:
054557,000245: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054558,000246: 5406 74744 MASK BIT8
054559,000247: 5407 10000 CCS A
054560,000248: 5410 15427 TCF GETNEWNM
054561,000249:
054562,000250: 5411 30002 CA Q
054563,000251: 5412 54063 TS TEMPNM
054564,000252: 5413 30006 CA BB
054565,000253: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054566,000254: 5415 04007 ROR SUPERBNK
054567,000255: 5416 54064 TS TEMPBB
054568,000256:
054569,000257: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054570,000258: 5420 22073 LXCH TEMPBBCN
054571,000259: 5421 52006 DTCB
054572,000260:
054573,000261: 5422 02312 CON2ADR GENADR CON2
054574,000262:
054575,000263: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054576,000264: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054577,000265: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1300
|
054579,000267: 5426 15404 TCF CON1 -1
054580,000268:
054581,000269: 5427 00006 GETNEWNM EXTEND
054582,000270: 5430 50002 INDEX Q
054583,000271: 5431 30001 DCA 0
054584,000272: 5432 52064 DXCH TEMPNM
054585,000273: 5433 34752 CA TWO
054586,000274: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054587,000275:
054588,000276: 5435 15417 TCF TOCON2
054589,000277:
054590,000278: 5436 5024 OCT14000 EQUALS PRIO14
054591,000279: 5436 0061 TEMPG EQUALS ITEMP1
054592,000280: 5436 0062 TEMPP EQUALS ITEMP2
054593,000281: 5436 0063 TEMPNM EQUALS ITEMP3
054594,000282: 5436 0064 TEMPBB EQUALS ITEMP4
054595,000283: 5436 0065 TEMPSW EQUALS ITEMP5
054596,000284: 5436 0066 TEMPSW2 EQUALS ITEMP6
054597,000285: 5436 0070 TEMPPR EQUALS RUPTREG1
054598,000286: 5436 0071 TEMPG2 EQUALS RUPTREG2
054599,000287: 5436 0072 TEMPP2 EQUALS RUPTREG3
054600,000288:
054601,000289: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054602,000290: 5436 0000006 BB EQUALS BBANK
054603,000291:
054604,000292: 14,3774 BANK 14
054605,000293: 10,2000 SETLOC PHASETAB
054606,000294: 10,2000 BANK
054607,000295:
054608,000296: 10,2224 E3,1436 EBANK= PHSNAME1
054609,000297: 10,2224 COUNT* $$/PHASE
054610,000298: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054611,000299: 10,2225 30065 CA TEMPSW
054612,000300: 10,2226 74757 MASK OCT7
054613,000301: 10,2227 60000 DOUBLE
054614,000302: 10,2230 54061 TS TEMPG
054615,000303:
054616,000304: 10,2231 30065 CA TEMPSW
054617,000305: 10,2232 75030 MASK OCT17770
054618,000306: 10,2233 00006 EXTEND
054619,000307: 10,2234 74740 MP BIT12
054620,000308: 10,2235 54062 TS TEMPP
054621,000309:
054622,000310: 10,2236 30065 CA TEMPSW
054623,000311: 10,2237 74101 MASK OCT60000
054624,000312: 10,2240 56065 XCH TEMPSW
054625,000313: 10,2241 75024 MASK OCT14000
054626,000314: 10,2242 10000 CCS A
|
|
Page 1301
|
054628,000316: 10,2243 15370 TCF ONEORTWO
054629,000317:
054630,000318: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054631,000319: 10,2245 50061 NDX TEMPG
054632,000320: 10,2246 54751 TS PHASE1 -2
054633,000321:
054634,000322: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054635,000323: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054636,000324:
054637,000325: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054638,000326: 10,2252 40072 CS TEMPP2
054639,000327: 10,2253 22072 LXCH TEMPP2
054640,000328: 10,2254 50071 NDX TEMPG2
054641,000329: 10,2255 52751 DXCH -PHASE1 -2
054642,000330:
054643,000331: 10,2256 10066 CCS TEMPSW2
054644,000332: 10,2257 12260 NOOP # CAN:T GET HERE
054645,000333: 10,2260 12264 TCF BELOW2
054646,000334:
054647,000335: 10,2261 40025 CS TIME1
054648,000336: 10,2262 50071 NDX TEMPG2
054649,000337: 10,2263 55051 TS TBASE1 -2
054650,000338:
054651,000339: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054652,000340: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054653,000341: 10,2266 12303 TCF BELOW4 # SET NEITHER
054654,000342:
054655,000343: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054656,000344: 10,2270 50061 NDX TEMPG
054657,000345: 10,2271 55051 TS TBASE1 -2
054658,000346:
054659,000347: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054660,000348: 10,2273 62276 AD BIT14COM
054661,000349: 10,2274 10000 CCS A
054662,000350: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054663,000351: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054664,000352: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054665,000353:
054666,000354: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054667,000355: 10,2301 30025 DCA TIME2
054668,000356: 10,2302 53152 DXCH LONGBASE
054669,000357:
054670,000358: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054671,000359: 10,2304 50061 NDX TEMPG
054672,000360: 10,2305 54750 TS -PHASE1 -2
054673,000361:
054674,000362: 10,2306 30002 CA Q
054675,000363: 10,2307 22073 LXCH TEMPBBCN
054676,000364: 10,2310 00003 RELINT
054677,000365: 10,2311 52006 DTCB
|
|
Page 1302
|
054679,000367: 10,2312 22073 CON2 LXCH TEMPBBCN
054680,000368:
054681,000369: 10,2313 30062 CA TEMPP
054682,000370: 10,2314 50061 NDX TEMPG
054683,000371: 10,2315 54751 TS PHASE1 -2
054684,000372:
054685,000373: 10,2316 30070 CA TEMPPR
054686,000374: 10,2317 50061 NDX TEMPG
054687,000375: 10,2320 55052 TS PHSPRDT1 -2
054688,000376:
054689,000377: 10,2321 00006 EXTEND
054690,000378: 10,2322 30064 DCA TEMPNM
054691,000379: 10,2323 50061 NDX TEMPG
054692,000380: 10,2324 53435 DXCH PHSNAME1 -2
054693,000381:
054694,000382: 10,2325 12247 TCF BELOW1
054695,000383:
054696,000384: 7750 BLOCK 03
054697,000385: 6000 SETLOC FFTAG6
054698,000386: 6000 BANK
054699,000387:
054700,000388: 7750 COUNT* $$/PHASE
054701,000389: 7750 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054702,000390: 7751 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054703,000391: 7752 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054704,000392:
054705,000393: 7753 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054706,000394:
054707,000395:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc