Source Code
|
These source-code files are part of a reconstructed copy of Luminary 98, a
development version of the Apollo 11 Lunar Module (LM) Apollo Guidance Computer
(AGC) software.
The reconstruction began with source code of Luminary 99 revision 1 previously
transcribed from a digitized copy of that program. The code was then updated
by undoing changes described in original Luminary memo 85, using asterisks
indicating changed lines in the listing as a guide. While no listing of this
version is known to exist, nor are the memory-bank checksums available,
the reconstruction is believed to be correct because it was an an intermediate
step in reconstructing Luminary 97 whose reconstruction was
verified by matching memory-bank checksums to those listed in drawing 2021152G.
Note that page numbers in the reconstructed code match those on the Luminary 099
revision 001 printout, although the added code would likely have changed page
numbers for a real Luminary 98 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054198,000002: ## Copyright: Public domain.
054199,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054200,000004: ## Purpose: A section of Luminary revision 98.
054201,000005: ## It is part of the reconstructed source code for the a
054202,000006: ## development version of the flight software for the Lunar
054203,000007: ## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 11.
054204,000008: ## The code has been recreated from a copy of Luminary 99
054205,000009: ## revision 001, using asterisks indicating changed lines in
054206,000010: ## the listing and Luminary Memo #85, which lists changes between
054207,000011: ## Luminary 98 and 99.
054208,000012: ## Reference: pp. 1294-1302
054209,000013: ## Assembler: yaYUL
054210,000014: ## Contact: Ron Burkey <info@sandroid.org>.
054211,000015: ## Website: www.ibiblio.org/apollo/index.html
054212,000016: ## Mod history: 2019-07-28 MAS Created from Luminary 99.
054213,000017:
|
|
Page 1294
|
054215,000019: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054216,000020:
054217,000021: 43,3724 COUNT* $$/PHASE
054218,000022: 5311 BLOCK 02
054219,000023: 4000 SETLOC FFTAG1
054220,000024: 4000 BANK
054221,000025:
054222,000026: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054223,000027: 5312 30000 CAF 0
054224,000028: 5313 24002 INCR Q
054225,000029:
054226,000030: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054227,000031: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054228,000032: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054229,000033: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054230,000034: 5320 20213 CADR SETUPDSP
054231,000035:
054232,000036: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054233,000037:
054234,000038: 5321 50002 CHECKMM INDEX Q
054235,000039: 5322 40000 CS 0
054236,000040: 5323 61011 AD MODREG
054237,000041: 5324 00006 EXTEND
054238,000042: 5325 16741 BZF Q+2
054239,000043: 5326 16737 TCF Q+1 # NO MATCH
054240,000044:
054241,000045: 5327 6742 TCQ = Q+2 +1
054242,000046:
054243,000047: 14,3774 BANK 14
054244,000048: 10,2000 SETLOC PHASETAB
054245,000049: 10,2000 BANK
054246,000050:
054247,000051: 10,2213 COUNT* $$/PHASE
054248,000052: 10,2213 00004 SETUPDSP INHINT
054249,000053: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054250,000054: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054251,000055: 10,2216 05072 TC NOVAC # NEWMODE X
054252,000056: 10,2217 1011 EBANK= MODREG
054253,000057: 10,2217 03534 60102 2CADR DSPMMJOB
054254,000058:
054255,000059: 10,2221 52071 DXCH RUPTREG1
054256,000060: 10,2222 00003 RELINT
054257,000061: 10,2223 52006 DXCH Z # RETURN
054258,000062:
054259,000063: 10,2224 40,3534 DSPMMJOB EQUALS DSPMMJB
054260,000064:
054261,000065: 5327 BLOCK 02
054262,000066: 4000 SETLOC FFTAG1
054263,000067: 4000 BANK
054264,000068:
|
|
Page 1295
|
054266,000070: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054267,000071: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054268,000072: # TC PHASCHNG
054269,000073: # OCT XXXXX
054270,000074: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054271,000075: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054272,000076: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054273,000077: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054274,000078: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054275,000079: # LONGCALL TO BE RESTARTED.
054276,000080: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054277,000081:
054278,000082: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054279,000083: # TL0 00P PPP PPP GGG ,
054280,000084: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054281,000085: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054282,000086: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054283,000087: # IT IS SET TO 0. SOME EXAMPLES,
054284,000088: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054285,000089: # OCT 00003 MAKING GROUP 3 INACTIVE
054286,000090:
054287,000091: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054288,000092: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054289,000093:
054290,000094: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054291,000095: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054292,000096: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054293,000097: # LOCATION
054294,000098:
054295,000099: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054296,000100: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054297,000101: # LONGBASE WAS SET THIS SINGLE ENTRY
054298,000102: # SHOULD BE A LONGCALL)
054299,000103:
054300,000104: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054301,000105: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054302,000106: # LONGCALL TO BE RESTARTED
054303,000107:
054304,000108: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054305,000109: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054306,000110: # TL0 1AD XXX CJW GGG
054307,000111: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054308,000112: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054309,000113: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1296
|
054311,000115: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054312,000116: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054313,000117: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054314,000118: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054315,000119: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054316,000120: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054317,000121: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054318,000122: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054319,000123: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054320,000124: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054321,000125: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054322,000126: # AD+3 ALSO GO TO AD+3
054323,000127:
054324,000128: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054325,000129: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054326,000130: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054327,000131: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054328,000132: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054329,000133: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054330,000134: # LOCATION AD+5
054331,000135:
054332,000136: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054333,000137: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054334,000138:
054335,000139: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054336,000140: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054337,000141: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054338,000142: # TL1 DAP PPP PPP GGG
054339,000143: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054340,000144: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054341,000145: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054342,000146: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054343,000147: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054344,000148: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054345,000149: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054346,000150: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054347,000151: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054348,000152: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054349,000153: # AD+5 GO TO AD+5
054350,000154:
054351,000155: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054352,000156: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054353,000157: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054354,000158: # BY MEANS OF GROUP 5
|
|
Page 1297
|
054356,000160: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054357,000161:
054358,000162: # SUMMARY OF BITS
054359,000163: # TYPE A TL0 00P PPP PPP GGG
054360,000164: # TYPE B TL1 DAP PPP PPP GGG
054361,000165: # TYPE C TL0 1AD XXX CJW GGG
054362,000166:
|
|
Page 1298
|
054364,000168: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054365,000169: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054366,000170: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054367,000171: # TC 2PHSCHNG
054368,000172: # OCT XXXXX
054369,000173: # OCT YYYYY
054370,000174: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054371,000175: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054372,000176: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054373,000177: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054374,000178: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054375,000179: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054376,000180: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054377,000181: # AD+4 FOR GROUP 5 PHASE INFORMATION
054378,000182:
054379,000183: 5327 COUNT* $$/PHASE
054380,000184: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054381,000185: 5330 50002 NDX Q
054382,000186: 5331 30000 CA 0
054383,000187: 5332 24002 INCR Q
054384,000188: 5333 54072 TS TEMPP2
054385,000189:
054386,000190: 5334 74757 MASK OCT7
054387,000191: 5335 60000 DOUBLE
054388,000192: 5336 54071 TS TEMPG2
054389,000193:
054390,000194: 5337 30072 CA TEMPP2
054391,000195: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054392,000196: 5341 00006 EXTEND
054393,000197: 5342 74740 MP BIT12
054394,000198: 5343 56072 XCH TEMPP2
054395,000199:
054396,000200: 5344 74735 MASK BIT15
054397,000201: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054398,000202:
054399,000203: 5346 50002 INDEX Q
054400,000204: 5347 30000 CA 0
054401,000205: 5350 24002 INCR Q
054402,000206: 5351 54065 TS TEMPSW
054403,000207:
054404,000208: 5352 15363 TCF PHASJUMP
054405,000209:
054406,000210: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054407,000211: 5354 50002 INDEX Q
054408,000212: 5355 30000 CA 0
054409,000213: 5356 24002 INCR Q
054410,000214: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1299
|
054412,000216: 5360 54065 TS TEMPSW
054413,000217: 5361 34753 CA ONE
054414,000218: 5362 54066 TS TEMPSW2
054415,000219: 5363 00006 PHASJUMP EXTEND
054416,000220: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054417,000221: 5365 52006 DTCB
054418,000222:
054419,000223: 5366 E3,1400 EBANK= LST1
054420,000224: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054421,000225:
054422,000226: 5370 22073 ONEORTWO LXCH TEMPBBCN
054423,000227: 5371 22006 LXCH BBANK
054424,000228: 5372 22073 LXCH TEMPBBCN
054425,000229:
054426,000230: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054427,000231: 5374 10000 CCS A
054428,000232: 5375 17750 TCF CHECKB # IT IS OF TYPE :B:
054429,000233:
054430,000234: 5376 30062 CA TEMPP
054431,000235: 5377 74745 MASK BIT7
054432,000236: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054433,000237: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054434,000238:
054435,000239: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054436,000240: 5403 31052 CA PHSPRDT1 -2
054437,000241: 5404 54070 TS TEMPPR
054438,000242:
054439,000243: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054440,000244: 5406 74744 MASK BIT8
054441,000245: 5407 10000 CCS A
054442,000246: 5410 15427 TCF GETNEWNM
054443,000247:
054444,000248: 5411 30002 CA Q
054445,000249: 5412 54063 TS TEMPNM
054446,000250: 5413 30006 CA BB
054447,000251: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054448,000252: 5415 04007 ROR SUPERBNK
054449,000253: 5416 54064 TS TEMPBB
054450,000254:
054451,000255: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054452,000256: 5420 22073 LXCH TEMPBBCN
054453,000257: 5421 52006 DTCB
054454,000258:
054455,000259: 5422 02312 CON2ADR GENADR CON2
054456,000260:
054457,000261: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054458,000262: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054459,000263: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1300
|
054461,000265: 5426 15404 TCF CON1 -1
054462,000266:
054463,000267: 5427 00006 GETNEWNM EXTEND
054464,000268: 5430 50002 INDEX Q
054465,000269: 5431 30001 DCA 0
054466,000270: 5432 52064 DXCH TEMPNM
054467,000271: 5433 34752 CA TWO
054468,000272: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054469,000273:
054470,000274: 5435 15417 TCF TOCON2
054471,000275:
054472,000276: 5436 5024 OCT14000 EQUALS PRIO14
054473,000277: 5436 0061 TEMPG EQUALS ITEMP1
054474,000278: 5436 0062 TEMPP EQUALS ITEMP2
054475,000279: 5436 0063 TEMPNM EQUALS ITEMP3
054476,000280: 5436 0064 TEMPBB EQUALS ITEMP4
054477,000281: 5436 0065 TEMPSW EQUALS ITEMP5
054478,000282: 5436 0066 TEMPSW2 EQUALS ITEMP6
054479,000283: 5436 0070 TEMPPR EQUALS RUPTREG1
054480,000284: 5436 0071 TEMPG2 EQUALS RUPTREG2
054481,000285: 5436 0072 TEMPP2 EQUALS RUPTREG3
054482,000286:
054483,000287: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054484,000288: 5436 0000006 BB EQUALS BBANK
054485,000289:
054486,000290: 14,3774 BANK 14
054487,000291: 10,2000 SETLOC PHASETAB
054488,000292: 10,2000 BANK
054489,000293:
054490,000294: 10,2224 E3,1436 EBANK= PHSNAME1
054491,000295: 10,2224 COUNT* $$/PHASE
054492,000296: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054493,000297: 10,2225 30065 CA TEMPSW
054494,000298: 10,2226 74757 MASK OCT7
054495,000299: 10,2227 60000 DOUBLE
054496,000300: 10,2230 54061 TS TEMPG
054497,000301:
054498,000302: 10,2231 30065 CA TEMPSW
054499,000303: 10,2232 75030 MASK OCT17770
054500,000304: 10,2233 00006 EXTEND
054501,000305: 10,2234 74740 MP BIT12
054502,000306: 10,2235 54062 TS TEMPP
054503,000307:
054504,000308: 10,2236 30065 CA TEMPSW
054505,000309: 10,2237 74101 MASK OCT60000
054506,000310: 10,2240 56065 XCH TEMPSW
054507,000311: 10,2241 75024 MASK OCT14000
054508,000312: 10,2242 10000 CCS A
|
|
Page 1301
|
054510,000314: 10,2243 15370 TCF ONEORTWO
054511,000315:
054512,000316: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054513,000317: 10,2245 50061 NDX TEMPG
054514,000318: 10,2246 54751 TS PHASE1 -2
054515,000319:
054516,000320: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054517,000321: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054518,000322:
054519,000323: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054520,000324: 10,2252 40072 CS TEMPP2
054521,000325: 10,2253 22072 LXCH TEMPP2
054522,000326: 10,2254 50071 NDX TEMPG2
054523,000327: 10,2255 52751 DXCH -PHASE1 -2
054524,000328:
054525,000329: 10,2256 10066 CCS TEMPSW2
054526,000330: 10,2257 12260 NOOP # CAN:T GET HERE
054527,000331: 10,2260 12264 TCF BELOW2
054528,000332:
054529,000333: 10,2261 40025 CS TIME1
054530,000334: 10,2262 50071 NDX TEMPG2
054531,000335: 10,2263 55051 TS TBASE1 -2
054532,000336:
054533,000337: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054534,000338: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054535,000339: 10,2266 12303 TCF BELOW4 # SET NEITHER
054536,000340:
054537,000341: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054538,000342: 10,2270 50061 NDX TEMPG
054539,000343: 10,2271 55051 TS TBASE1 -2
054540,000344:
054541,000345: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054542,000346: 10,2273 62276 AD BIT14COM
054543,000347: 10,2274 10000 CCS A
054544,000348: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054545,000349: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054546,000350: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054547,000351:
054548,000352: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054549,000353: 10,2301 30025 DCA TIME2
054550,000354: 10,2302 53152 DXCH LONGBASE
054551,000355:
054552,000356: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054553,000357: 10,2304 50061 NDX TEMPG
054554,000358: 10,2305 54750 TS -PHASE1 -2
054555,000359:
054556,000360: 10,2306 30002 CA Q
054557,000361: 10,2307 22073 LXCH TEMPBBCN
054558,000362: 10,2310 00003 RELINT
054559,000363: 10,2311 52006 DTCB
|
|
Page 1302
|
054561,000365: 10,2312 22073 CON2 LXCH TEMPBBCN
054562,000366:
054563,000367: 10,2313 30062 CA TEMPP
054564,000368: 10,2314 50061 NDX TEMPG
054565,000369: 10,2315 54751 TS PHASE1 -2
054566,000370:
054567,000371: 10,2316 30070 CA TEMPPR
054568,000372: 10,2317 50061 NDX TEMPG
054569,000373: 10,2320 55052 TS PHSPRDT1 -2
054570,000374:
054571,000375: 10,2321 00006 EXTEND
054572,000376: 10,2322 30064 DCA TEMPNM
054573,000377: 10,2323 50061 NDX TEMPG
054574,000378: 10,2324 53435 DXCH PHSNAME1 -2
054575,000379:
054576,000380: 10,2325 12247 TCF BELOW1
054577,000381:
054578,000382: 7750 BLOCK 03
054579,000383: 6000 SETLOC FFTAG6
054580,000384: 6000 BANK
054581,000385:
054582,000386: 7750 COUNT* $$/PHASE
054583,000387: 7750 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054584,000388: 7751 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054585,000389: 7752 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054586,000390:
054587,000391: 7753 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054588,000392:
054589,000393:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc