Source Code
|
This is a reconstructed version of Luminary 130, the initial AGC program released
in November 1969 for the Apollo 13 LM. Three more releases
followed before the flown revision was finally manufactured in February 1970.
This reconstruction was created from a previous transcription of the original listing of
Luminary 131, combined with Luminary memo #129 which describes the small difference
between the Luminary 130 and 131. The reconstructed source code was verified by
matching memory-bank checksums to those listed for Luminary 130 in drawing 2021152G.
In this source code, program comments from the original (Luminary 131) code are
prefixed with '#', while those added later by the Virtual AGC project are prefixed
with '##'.
|
054550,000002: ## Copyright: Public domain.
054551,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054552,000004: ## Purpose: A section of the reconstructed source code for Luminary 130.
054553,000005: ## This was the original program released for the Apollo 13 LM,
054554,000006: ## although several more revisions would follow. It has been
054555,000007: ## reconstructed from a listing of Luminary 131, from which it
054556,000008: ## differs on only two lines in P70-P71. The difference is
054557,000009: ## described in detail in Luminary memo #129, which was used
054558,000010: ## to perform the reconstruction. This file is intended to be a
054559,000011: ## faithful reconstruction, except that the code format has been
054560,000012: ## changed to conform to the requirements of the yaYUL assembler
054561,000013: ## rather than the original YUL assembler.
054562,000014: ## Reference: pp. 1286-1294
054563,000015: ## Contact: Ron Burkey <info@sandroid.org>.
054564,000016: ## Website: www.ibiblio.org/apollo
054565,000017: ## Mod history: 06/05/03 RSB. Began transcribing.
054566,000018: ## 2011-05-07 JL Removed workaround. Flagged SBANK= workaround
054567,000019: ## for future removal.
054568,000020: ## 2017-01-06 RSB Page numbers now agree with those on the
054569,000021: ## original hardcopy, as opposed to the PDF page
054570,000022: ## numbers in 1701.pdf.
054571,000023: ## 2017-01-28 RSB Back-ported some comment-text fixes from Luminary 69.
054572,000024: ## 2017-02-27 RSB Proofed comment text using octopus/ProoferComments.
054573,000025: ## 2017-03-01 RSB Fixed lingering comment-text typos.
054574,000026: ## 2017-03-14 RSB Comment-text fixes noted in proofing Luminary 116.
054575,000027: ## 2017-03-16 RSB Comment-text fixes identified in 5-way
054576,000028: ## side-by-side diff of Luminary 69/99/116/131/210.
054577,000029: ## 2017-06-17 MAS Globally removed all SBANK= workarounds.
054578,000030: ## 2018-09-04 MAS Copied from Luminary 131 for Luminary 130.
054579,000031:
|
|
Page 1286
|
054581,000033: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054582,000034:
054583,000035: 43,3751 COUNT* $$/PHASE
054584,000036: 5311 BLOCK 02
054585,000037: 4000 SETLOC FFTAG1
054586,000038: 4000 BANK
054587,000039:
054588,000040: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054589,000041: 5312 30000 CAF 0
054590,000042: 5313 24002 INCR Q
054591,000043:
054592,000044: 5314 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054593,000045: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054594,000046: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054595,000047: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054596,000048: 5320 20213 CADR SETUPDSP
054597,000049:
054598,000050: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054599,000051:
054600,000052: 5321 50002 CHECKMM INDEX Q
054601,000053: 5322 40000 CS 0
054602,000054: 5323 61010 AD MODREG
054603,000055: 5324 00006 EXTEND
054604,000056: 5325 16744 BZF Q+2
054605,000057: 5326 16742 TCF Q+1 # NO MATCH
054606,000058:
054607,000059: 5327 6745 TCQ = Q+2 +1
054608,000060:
054609,000061: 14,3775 BANK 14
054610,000062: 10,2000 SETLOC PHASETAB
054611,000063: 10,2000 BANK
054612,000064:
054613,000065: 10,2213 COUNT* $$/PHASE
054614,000066: 10,2213 00004 SETUPDSP INHINT
054615,000067: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054616,000068: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054617,000069: 10,2216 05072 TC NOVAC # NEWMODE X
054618,000070: 10,2217 1010 EBANK= MODREG
054619,000071: 10,2217 03577 60102 2CADR DSPMMJOB
054620,000072:
054621,000073: 10,2221 52071 DXCH RUPTREG1
054622,000074: 10,2222 00003 RELINT
054623,000075: 10,2223 52006 DXCH Z # RETURN
054624,000076:
054625,000077: 10,2224 40,3577 DSPMMJOB EQUALS DSPMMJB
054626,000078:
054627,000079: 5327 BLOCK 02
054628,000080: 4000 SETLOC FFTAG1
054629,000081: 4000 BANK
|
|
Page 1287
|
054631,000083: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054632,000084: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054633,000085: # TC PHASCHNG
054634,000086: # OCT XXXXX
054635,000087: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054636,000088: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054637,000089: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054638,000090: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054639,000091: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054640,000092: # LONGCALL TO BE RESTARTED.
054641,000093: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054642,000094:
054643,000095: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054644,000096: # TL0 00P PPP PPP GGG ,
054645,000097: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054646,000098: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054647,000099: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054648,000100: # IT IS SET TO 0. SOME EXAMPLES,
054649,000101: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054650,000102: # OCT 00003 MAKING GROUP 3 INACTIVE
054651,000103:
054652,000104: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054653,000105: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054654,000106:
054655,000107: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054656,000108: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054657,000109: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054658,000110: # LOCATION
054659,000111:
054660,000112: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054661,000113: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054662,000114: # LONGBASE WAS SET THIS SINGLE ENTRY
054663,000115: # SHOULD BE A LONGCALL)
054664,000116:
054665,000117: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054666,000118: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054667,000119: # LONGCALL TO BE RESTARTED
054668,000120:
054669,000121: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054670,000122: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054671,000123: # TL0 1AD XXX CJW GGG
054672,000124: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054673,000125: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054674,000126: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1288
|
054676,000128: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054677,000129: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054678,000130: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054679,000131: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054680,000132: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054681,000133: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054682,000134: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054683,000135: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054684,000136: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054685,000137: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054686,000138: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054687,000139: # AD+3 ALSO GO TO AD+3
054688,000140:
054689,000141: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054690,000142: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054691,000143: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054692,000144: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054693,000145: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054694,000146: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054695,000147: # LOCATION AD+5
054696,000148:
054697,000149: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054698,000150: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054699,000151:
054700,000152: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054701,000153: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054702,000154: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054703,000155: # TL1 DAP PPP PPP GGG
054704,000156: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054705,000157: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054706,000158: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054707,000159: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054708,000160: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054709,000161: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054710,000162: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054711,000163: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054712,000164: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054713,000165: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054714,000166: # AD+5 GO TO AD+5
054715,000167:
054716,000168: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054717,000169: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054718,000170: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054719,000171: # BY MEANS OF GROUP 5
|
|
Page 1289
|
054721,000173: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054722,000174:
054723,000175: # SUMMARY OF BITS
054724,000176: # TYPE A TL0 00P PPP PPP GGG
054725,000177: # TYPE B TL1 DAP PPP PPP GGG
054726,000178: # TYPE C TL0 1AD XXX CJW GGG
054727,000179:
|
|
Page 1290
|
054729,000181: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054730,000182: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054731,000183: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054732,000184: # TC 2PHSCHNG
054733,000185: # OCT XXXXX
054734,000186: # OCT YYYYY
054735,000187: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054736,000188: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054737,000189: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054738,000190: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054739,000191: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054740,000192: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054741,000193: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054742,000194: # AD+4 FOR GROUP 5 PHASE INFORMATION
054743,000195:
054744,000196: 5327 COUNT* $$/PHASE
054745,000197: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054746,000198: 5330 50002 NDX Q
054747,000199: 5331 30000 CA 0
054748,000200: 5332 24002 INCR Q
054749,000201: 5333 54072 TS TEMPP2
054750,000202:
054751,000203: 5334 74757 MASK OCT7
054752,000204: 5335 60000 DOUBLE
054753,000205: 5336 54071 TS TEMPG2
054754,000206:
054755,000207: 5337 30072 CA TEMPP2
054756,000208: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054757,000209: 5341 00006 EXTEND
054758,000210: 5342 74740 MP BIT12
054759,000211: 5343 56072 XCH TEMPP2
054760,000212:
054761,000213: 5344 74735 MASK BIT15
054762,000214: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054763,000215:
054764,000216: 5346 50002 INDEX Q
054765,000217: 5347 30000 CA 0
054766,000218: 5350 24002 INCR Q
054767,000219: 5351 54065 TS TEMPSW
054768,000220:
054769,000221: 5352 15363 TCF PHASJUMP
054770,000222:
054771,000223: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054772,000224: 5354 50002 INDEX Q
054773,000225: 5355 30000 CA 0
054774,000226: 5356 24002 INCR Q
054775,000227: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1291
|
054777,000229: 5360 54065 TS TEMPSW
054778,000230: 5361 34753 CA ONE
054779,000231: 5362 54066 TS TEMPSW2
054780,000232: 5363 00006 PHASJUMP EXTEND
054781,000233: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054782,000234: 5365 52006 DTCB
054783,000235:
054784,000236: 5366 E3,1400 EBANK= LST1
054785,000237: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054786,000238:
054787,000239: 5370 22073 ONEORTWO LXCH TEMPBBCN
054788,000240: 5371 22006 LXCH BBANK
054789,000241: 5372 22073 LXCH TEMPBBCN
054790,000242:
054791,000243: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054792,000244: 5374 10000 CCS A
054793,000245: 5375 17753 TCF CHECKB # IT IS OF TYPE :B:
054794,000246:
054795,000247: 5376 30062 CA TEMPP
054796,000248: 5377 74745 MASK BIT7
054797,000249: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054798,000250: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054799,000251:
054800,000252: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054801,000253: 5403 31051 CA PHSPRDT1 -2
054802,000254: 5404 54070 TS TEMPPR
054803,000255:
054804,000256: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054805,000257: 5406 74744 MASK BIT8
054806,000258: 5407 10000 CCS A
054807,000259: 5410 15427 TCF GETNEWNM
054808,000260:
054809,000261: 5411 30002 CA Q
054810,000262: 5412 54063 TS TEMPNM
054811,000263: 5413 30006 CA BB
054812,000264: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054813,000265: 5415 04007 ROR SUPERBNK
054814,000266: 5416 54064 TS TEMPBB
054815,000267:
054816,000268: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054817,000269: 5420 22073 LXCH TEMPBBCN
054818,000270: 5421 52006 DTCB
054819,000271:
054820,000272: 5422 02312 CON2ADR GENADR CON2
054821,000273:
054822,000274: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054823,000275: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054824,000276: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1292
|
054826,000278: 5426 15404 TCF CON1 -1
054827,000279:
054828,000280: 5427 00006 GETNEWNM EXTEND
054829,000281: 5430 50002 INDEX Q
054830,000282: 5431 30001 DCA 0
054831,000283: 5432 52064 DXCH TEMPNM
054832,000284: 5433 34752 CA TWO
054833,000285: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054834,000286:
054835,000287: 5435 15417 TCF TOCON2
054836,000288:
054837,000289: 5436 5024 OCT14000 EQUALS PRIO14
054838,000290: 5436 0061 TEMPG EQUALS ITEMP1
054839,000291: 5436 0062 TEMPP EQUALS ITEMP2
054840,000292: 5436 0063 TEMPNM EQUALS ITEMP3
054841,000293: 5436 0064 TEMPBB EQUALS ITEMP4
054842,000294: 5436 0065 TEMPSW EQUALS ITEMP5
054843,000295: 5436 0066 TEMPSW2 EQUALS ITEMP6
054844,000296: 5436 0070 TEMPPR EQUALS RUPTREG1
054845,000297: 5436 0071 TEMPG2 EQUALS RUPTREG2
054846,000298: 5436 0072 TEMPP2 EQUALS RUPTREG3
054847,000299:
054848,000300: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054849,000301: 5436 0000006 BB EQUALS BBANK
054850,000302:
054851,000303: 14,3775 BANK 14
054852,000304: 10,2000 SETLOC PHASETAB
054853,000305: 10,2000 BANK
054854,000306:
054855,000307: 10,2224 E3,1436 EBANK= PHSNAME1
054856,000308: 10,2224 COUNT* $$/PHASE
054857,000309: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054858,000310: 10,2225 30065 CA TEMPSW
054859,000311: 10,2226 74757 MASK OCT7
054860,000312: 10,2227 60000 DOUBLE
054861,000313: 10,2230 54061 TS TEMPG
054862,000314:
054863,000315: 10,2231 30065 CA TEMPSW
054864,000316: 10,2232 75030 MASK OCT17770
054865,000317: 10,2233 00006 EXTEND
054866,000318: 10,2234 74740 MP BIT12
054867,000319: 10,2235 54062 TS TEMPP
054868,000320:
054869,000321: 10,2236 30065 CA TEMPSW
054870,000322: 10,2237 74101 MASK OCT60000
054871,000323: 10,2240 56065 XCH TEMPSW
054872,000324: 10,2241 75024 MASK OCT14000
054873,000325: 10,2242 10000 CCS A
|
|
Page 1293
|
054875,000327: 10,2243 15370 TCF ONEORTWO
054876,000328:
054877,000329: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054878,000330: 10,2245 50061 NDX TEMPG
054879,000331: 10,2246 54750 TS PHASE1 -2
054880,000332:
054881,000333: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054882,000334: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054883,000335:
054884,000336: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054885,000337: 10,2252 40072 CS TEMPP2
054886,000338: 10,2253 22072 LXCH TEMPP2
054887,000339: 10,2254 50071 NDX TEMPG2
054888,000340: 10,2255 52750 DXCH -PHASE1 -2
054889,000341:
054890,000342: 10,2256 10066 CCS TEMPSW2
054891,000343: 10,2257 12260 NOOP # CAN:T GET HERE
054892,000344: 10,2260 12264 TCF BELOW2
054893,000345:
054894,000346: 10,2261 40025 CS TIME1
054895,000347: 10,2262 50071 NDX TEMPG2
054896,000348: 10,2263 55050 TS TBASE1 -2
054897,000349:
054898,000350: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054899,000351: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054900,000352: 10,2266 12303 TCF BELOW4 # SET NEITHER
054901,000353:
054902,000354: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054903,000355: 10,2270 50061 NDX TEMPG
054904,000356: 10,2271 55050 TS TBASE1 -2
054905,000357:
054906,000358: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054907,000359: 10,2273 62276 AD BIT14COM
054908,000360: 10,2274 10000 CCS A
054909,000361: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054910,000362: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054911,000363: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054912,000364:
054913,000365: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054914,000366: 10,2301 30025 DCA TIME2
054915,000367: 10,2302 53151 DXCH LONGBASE
054916,000368:
054917,000369: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054918,000370: 10,2304 50061 NDX TEMPG
054919,000371: 10,2305 54747 TS -PHASE1 -2
054920,000372:
054921,000373: 10,2306 30002 CA Q
054922,000374: 10,2307 22073 LXCH TEMPBBCN
054923,000375: 10,2310 00003 RELINT
054924,000376: 10,2311 52006 DTCB
|
|
Page 1294
|
054926,000378: 10,2312 22073 CON2 LXCH TEMPBBCN
054927,000379:
054928,000380: 10,2313 30062 CA TEMPP
054929,000381: 10,2314 50061 NDX TEMPG
054930,000382: 10,2315 54750 TS PHASE1 -2
054931,000383:
054932,000384: 10,2316 30070 CA TEMPPR
054933,000385: 10,2317 50061 NDX TEMPG
054934,000386: 10,2320 55051 TS PHSPRDT1 -2
054935,000387:
054936,000388: 10,2321 00006 EXTEND
054937,000389: 10,2322 30064 DCA TEMPNM
054938,000390: 10,2323 50061 NDX TEMPG
054939,000391: 10,2324 53435 DXCH PHSNAME1 -2
054940,000392:
054941,000393: 10,2325 12247 TCF BELOW1
054942,000394:
054943,000395: 7753 BLOCK 03
054944,000396: 6000 SETLOC FFTAG6
054945,000397: 6000 BANK
054946,000398:
054947,000399: 7753 COUNT* $$/PHASE
054948,000400: 7753 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054949,000401: 7754 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054950,000402: 7755 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054951,000403:
054952,000404: 7756 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054953,000405:
054954,000406:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc