Source Code
|
These source-code files are part of a reconstructed copy of Luminary 163, the
first (unflown) release of the Apollo 14 Lunar Module (LM) Apollo Guidance
Computer (AGC) software.
The reconstruction began with reconstructed source code for Luminary 173. Changes
between revision 163 and 173 were backed out, as described by Luminary memos 157
and 158. The reconstruction was verified by matching memory-bank checksums
to those listed in drawing 2021152N. Note that page numbers in the reconstructed
code match those for the baseline log section mentioned in each file's changelog;
the page numbers for a real Luminary 163 listing would be different.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054758,000002: ## Copyright: Public domain.
054759,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054760,000004: ## Purpose: A section of Luminary revision 163.
054761,000005: ## It is part of the reconstructed source code for the first
054762,000006: ## (unflown) release of the flight software for the Lunar
054763,000007: ## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 14.
054764,000008: ## The code has been recreated from a reconstructed copy of
054765,000009: ## Luminary 173, as well as Luminary memos 157 amd 158.
054766,000010: ## It has been adapted such that the resulting bugger words
054767,000011: ## exactly match those specified for Luminary 163 in NASA
054768,000012: ## drawing 2021152N, which gives relatively high confidence
054769,000013: ## that the reconstruction is correct.
054770,000014: ## Reference: pp. 1283-1291
054771,000015: ## Assembler: yaYUL
054772,000016: ## Contact: Ron Burkey <info@sandroid.org>.
054773,000017: ## Website: www.ibiblio.org/apollo/index.html
054774,000018: ## Mod history: 2019-08-21 MAS Created from Luminary 173.
054775,000019:
|
|
Page 1283
|
054777,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054778,000022:
054779,000023: 43,3757 COUNT* $$/PHASE
054780,000024: 5322 BLOCK 02
054781,000025: 4000 SETLOC FFTAG1
054782,000026: 4000 BANK
054783,000027:
054784,000028: 5322 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054785,000029: 5323 30000 CAF 0
054786,000030: 5324 24002 INCR Q
054787,000031:
054788,000032: 5325 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054789,000033: 5326 35331 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054790,000034: 5327 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054791,000035: 5330 14640 TCF BANKJUMP # PUTS Q INTO A
054792,000036: 5331 20213 CADR SETUPDSP
054793,000037:
054794,000038: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054795,000039:
054796,000040: 5332 50002 CHECKMM INDEX Q
054797,000041: 5333 40000 CS 0
054798,000042: 5334 61010 AD MODREG
054799,000043: 5335 00006 EXTEND
054800,000044: 5336 16744 BZF Q+2
054801,000045: 5337 16742 TCF Q+1 # NO MATCH
054802,000046:
054803,000047: 5340 6745 TCQ = Q+2 +1
054804,000048:
054805,000049: 14,3775 BANK 14
054806,000050: 10,2000 SETLOC PHASETAB
054807,000051: 10,2000 BANK
054808,000052:
054809,000053: 10,2213 COUNT* $$/PHASE
054810,000054: 10,2213 00004 SETUPDSP INHINT
054811,000055: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054812,000056: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054813,000057: 10,2216 05072 TC NOVAC # NEWMODE X
054814,000058: 10,2217 1010 EBANK= MODREG
054815,000059: 10,2217 03606 60102 2CADR DSPMMJOB
054816,000060:
054817,000061: 10,2221 52071 DXCH RUPTREG1
054818,000062: 10,2222 00003 RELINT
054819,000063: 10,2223 52006 DXCH Z # RETURN
054820,000064:
054821,000065: 10,2224 40,3606 DSPMMJOB EQUALS DSPMMJB
054822,000066:
054823,000067:
054824,000068: 5340 BLOCK 02
054825,000069: 4000 SETLOC FFTAG1
054826,000070: 4000 BANK
|
|
Page 1284
|
054828,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054829,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054830,000074:
054831,000075: # TC PHASCHNG
054832,000076: # OCT XXXXX
054833,000077:
054834,000078: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATIONTHAT IS STORED PERMANENTLY. THESE
054835,000079: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054836,000080:
054837,000081: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
054838,000082: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054839,000083: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054840,000084: # LONGCALL TO BE RESTARTED.
054841,000085: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054842,000086:
054843,000087: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054844,000088:
054845,000089: # TL0 00P PPP PPP GGG ,
054846,000090:
054847,000091: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
054848,000092: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054849,000093: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054850,000094: # IT IS SET TO 0. SOME EXAMPLES,
054851,000095:
054852,000096: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TOBE SET TO 0,
054853,000097: # OCT 00003 MAKING GROUP 3 INACTIVE
054854,000098:
054855,000099: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054856,000100: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054857,000101:
054858,000102: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054859,000103: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054860,000104: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054861,000105: # LOCATION
054862,000106: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054863,000107: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054864,000108: # LONGBASE WAS SET THIS SINGLE ENTRY
054865,000109: # SHOULD BE A LONGCALL)
054866,000110: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054867,000111: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054868,000112: # LONGCALL TO BE RESTARTED
054869,000113:
054870,000114: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054871,000115: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054872,000116:
054873,000117: # TL0 1AD XXX CJW GGG
054874,000118:
054875,000119: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054876,000120: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054877,000121: # THESE THREE BIT S MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1285
|
054879,000123: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054880,000124: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054881,000125: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054882,000126: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054883,000127: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054884,000128: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054885,000129: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054886,000130: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054887,000131:
054888,000132: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054889,000133: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITHA PRIORITY
054890,000134: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054891,000135: # AD+3 ALSO GO TO AD+3
054892,000136:
054893,000137: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054894,000138: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054895,000139: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054896,000140: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
054897,000141: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054898,000142: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054899,000143: # LOCATION AD+5
054900,000144:
054901,000145: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054902,000146: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054903,000147:
054904,000148:
054905,000149: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054906,000150: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054907,000151: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054908,000152:
054909,000153: # TL1 DAP PPP PPP GGG
054910,000154:
054911,000155: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054912,000156: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054913,000157: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054914,000158: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN , OR 0 IF IT IS TO BE
054915,000159: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054916,000160:
054917,000161: # AD TC PHASCHNG TBASE IS SET AND ARESTART CAUSE GROUP 3
054918,000162: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054919,000163: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT(WE CAN
054920,000164: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054921,000165: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054922,000166: # AD+5 GO TO AD+5
054923,000167:
054924,000168: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054925,000169: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054926,000170: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054927,000171: # BY MEANS OF GROUP 5
054928,000172:
|
|
Page 1286
|
054930,000174: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054931,000175:
054932,000176:
054933,000177: # SUMMARY OF BITS
054934,000178:
054935,000179: # TYPE A TL0 00P PPP PPP GGG
054936,000180:
054937,000181: # TYPE B TL1 DAP PPP PPP GGG
054938,000182:
054939,000183: # TYPE C TL0 1AD XXX CJW GGG
054940,000184:
|
|
Page 1287
|
054942,000186: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054943,000187: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054944,000188: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054945,000189:
054946,000190: # TC 2PHSCHNG
054947,000191: # OCT XXXXX
054948,000192: # OCT YYYYY
054949,000193:
054950,000194: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
054951,000195: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054952,000196: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054953,000197:
054954,000198: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054955,000199: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054956,000200: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054957,000201: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054958,000202: # AD+4 FOR GROUP 5 PHASE INFORMATION
054959,000203:
054960,000204: 5340 COUNT* $$/PHASE
054961,000205: 5340 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054962,000206: 5341 50002 NDX Q
054963,000207: 5342 30000 CA 0
054964,000208: 5343 24002 INCR Q
054965,000209: 5344 54072 TS TEMPP2
054966,000210:
054967,000211: 5345 74757 MASK OCT7
054968,000212: 5346 60000 DOUBLE
054969,000213: 5347 54071 TS TEMPG2
054970,000214:
054971,000215: 5350 30072 CA TEMPP2
054972,000216: 5351 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054973,000217: 5352 00006 EXTEND
054974,000218: 5353 74740 MP BIT12
054975,000219: 5354 56072 XCH TEMPP2
054976,000220:
054977,000221: 5355 74735 MASK BIT15
054978,000222: 5356 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054979,000223:
054980,000224: 5357 50002 INDEX Q
054981,000225: 5360 30000 CA 0
054982,000226: 5361 24002 INCR Q
054983,000227: 5362 54065 TS TEMPSW
054984,000228:
054985,000229: 5363 15374 TCF PHASJUMP
054986,000230:
054987,000231: 5364 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054988,000232: 5365 50002 INDEX Q
054989,000233: 5366 30000 CA 0
054990,000234: 5367 24002 INCR Q
054991,000235: 5370 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1288
|
054993,000237: 5371 54065 TS TEMPSW
054994,000238: 5372 34753 CA ONE
054995,000239: 5373 54066 TS TEMPSW2
054996,000240: 5374 00006 PHASJUMP EXTEND
054997,000241: 5375 35400 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054998,000242: 5376 52006 DTCB
054999,000243:
055000,000244: 5377 E3,1400 EBANK= LST1
055001,000245: 5377 02224 20103 ADRPCHN2 2CADR PHSCHNG2
055002,000246:
055003,000247:
055004,000248:
055005,000249: 5401 22073 ONEORTWO LXCH TEMPBBCN
055006,000250: 5402 22006 LXCH BBANK
055007,000251: 5403 22073 LXCH TEMPBBCN
055008,000252:
055009,000253: 5404 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
055010,000254: 5405 10000 CCS A
055011,000255: 5406 17753 TCF CHECKB # IT IS OF TYPE :B:
055012,000256:
055013,000257: 5407 30062 CA TEMPP
055014,000258: 5410 74745 MASK BIT7
055015,000259: 5411 10000 CCS A # SHALL WE USE THE OLD PRIORITY
055016,000260: 5412 15434 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
055017,000261:
055018,000262: 5413 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
055019,000263: 5414 31051 CA PHSPRDT1 -2
055020,000264: 5415 54070 TS TEMPPR
055021,000265:
055022,000266: 5416 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
055023,000267: 5417 74744 MASK BIT8
055024,000268: 5420 10000 CCS A
055025,000269: 5421 15440 TCF GETNEWNM
055026,000270:
055027,000271: 5422 30002 CA Q
055028,000272: 5423 54063 TS TEMPNM
055029,000273: 5424 30006 CA BB
055030,000274: 5425 00006 EXTEND # PICK UP USERS SUPERBANK
055031,000275: 5426 04007 ROR SUPERBNK
055032,000276: 5427 54064 TS TEMPBB
055033,000277:
055034,000278: 5430 35433 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
055035,000279: 5431 22073 LXCH TEMPBBCN
055036,000280: 5432 52006 DTCB
055037,000281:
055038,000282: 5433 02312 CON2ADR GENADR CON2
055039,000283:
055040,000284: 5434 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
055041,000285: 5435 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
055042,000286: 5436 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1289
|
055044,000288: 5437 15415 TCF CON1 -1
055045,000289:
055046,000290: 5440 00006 GETNEWNM EXTEND
055047,000291: 5441 50002 INDEX Q
055048,000292: 5442 30001 DCA 0
055049,000293: 5443 52064 DXCH TEMPNM
055050,000294: 5444 34752 CA TWO
055051,000295: 5445 26002 ADS Q # OBTAIN RETURN ADDRESS
055052,000296:
055053,000297: 5446 15430 TCF TOCON2
055054,000298:
055055,000299: 5447 5024 OCT14000 EQUALS PRIO14
055056,000300: 5447 0061 TEMPG EQUALS ITEMP1
055057,000301: 5447 0062 TEMPP EQUALS ITEMP2
055058,000302: 5447 0063 TEMPNM EQUALS ITEMP3
055059,000303: 5447 0064 TEMPBB EQUALS ITEMP4
055060,000304: 5447 0065 TEMPSW EQUALS ITEMP5
055061,000305: 5447 0066 TEMPSW2 EQUALS ITEMP6
055062,000306: 5447 0070 TEMPPR EQUALS RUPTREG1
055063,000307: 5447 0071 TEMPG2 EQUALS RUPTREG2
055064,000308: 5447 0072 TEMPP2 EQUALS RUPTREG3
055065,000309:
055066,000310: 5447 0073 TEMPBBCN EQUALS RUPTREG4
055067,000311: 5447 0000006 BB EQUALS BBANK
055068,000312:
055069,000313:
055070,000314: 14,3775 BANK 14
055071,000315: 10,2000 SETLOC PHASETAB
055072,000316: 10,2000 BANK
055073,000317:
055074,000318: 10,2224 E3,1436 EBANK= PHSNAME1
055075,000319: 10,2224 COUNT* $$/PHASE
055076,000320: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
055077,000321: 10,2225 30065 CA TEMPSW
055078,000322: 10,2226 74757 MASK OCT7
055079,000323: 10,2227 60000 DOUBLE
055080,000324: 10,2230 54061 TS TEMPG
055081,000325:
055082,000326: 10,2231 30065 CA TEMPSW
055083,000327: 10,2232 75030 MASK OCT17770
055084,000328: 10,2233 00006 EXTEND
055085,000329: 10,2234 74740 MP BIT12
055086,000330: 10,2235 54062 TS TEMPP
055087,000331:
055088,000332: 10,2236 30065 CA TEMPSW
055089,000333: 10,2237 74101 MASK OCT60000
055090,000334: 10,2240 56065 XCH TEMPSW
055091,000335: 10,2241 75024 MASK OCT14000
055092,000336: 10,2242 10000 CCS A
|
|
Page 1290
|
055094,000338: 10,2243 15401 TCF ONEORTWO
055095,000339:
055096,000340: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
055097,000341: 10,2245 50061 NDX TEMPG
055098,000342: 10,2246 54750 TS PHASE1 -2
055099,000343:
055100,000344: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
055101,000345: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
055102,000346:
055103,000347: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
055104,000348: 10,2252 40072 CS TEMPP2
055105,000349: 10,2253 22072 LXCH TEMPP2
055106,000350: 10,2254 50071 NDX TEMPG2
055107,000351: 10,2255 52750 DXCH -PHASE1 -2
055108,000352:
055109,000353: 10,2256 10066 CCS TEMPSW2
055110,000354: 10,2257 12260 NOOP # CAN:T GET HERE
055111,000355: 10,2260 12264 TCF BELOW2
055112,000356:
055113,000357: 10,2261 40025 CS TIME1
055114,000358: 10,2262 50071 NDX TEMPG2
055115,000359: 10,2263 55050 TS TBASE1 -2
055116,000360:
055117,000361: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
055118,000362: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
055119,000363: 10,2266 12303 TCF BELOW4 # SET NEITHER
055120,000364:
055121,000365: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
055122,000366: 10,2270 50061 NDX TEMPG
055123,000367: 10,2271 55050 TS TBASE1 -2
055124,000368:
055125,000369: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
055126,000370: 10,2273 62276 AD BIT14COM
055127,000371: 10,2274 10000 CCS A
055128,000372: 10,2275 12276 NOOP # ***** CANT GET HERE *****
055129,000373: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
055130,000374: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
055131,000375:
055132,000376: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
055133,000377: 10,2301 30025 DCA TIME2
055134,000378: 10,2302 53151 DXCH LONGBASE
055135,000379:
055136,000380: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
055137,000381: 10,2304 50061 NDX TEMPG
055138,000382: 10,2305 54747 TS -PHASE1 -2
055139,000383:
055140,000384: 10,2306 30002 CA Q
055141,000385: 10,2307 22073 LXCH TEMPBBCN
055142,000386: 10,2310 00003 RELINT
055143,000387: 10,2311 52006 DTCB
|
|
Page 1291
|
055145,000389: 10,2312 22073 CON2 LXCH TEMPBBCN
055146,000390:
055147,000391: 10,2313 30062 CA TEMPP
055148,000392: 10,2314 50061 NDX TEMPG
055149,000393: 10,2315 54750 TS PHASE1 -2
055150,000394:
055151,000395: 10,2316 30070 CA TEMPPR
055152,000396: 10,2317 50061 NDX TEMPG
055153,000397: 10,2320 55051 TS PHSPRDT1 -2
055154,000398:
055155,000399: 10,2321 00006 EXTEND
055156,000400: 10,2322 30064 DCA TEMPNM
055157,000401: 10,2323 50061 NDX TEMPG
055158,000402: 10,2324 53435 DXCH PHSNAME1 -2
055159,000403:
055160,000404: 10,2325 12247 TCF BELOW1
055161,000405:
055162,000406: 7753 BLOCK 03
055163,000407: 6000 SETLOC FFTAG6
055164,000408: 6000 BANK
055165,000409:
055166,000410: 7753 COUNT* $$/PHASE
055167,000411: 7753 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
055168,000412: 7754 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
055169,000413: 7755 15434 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
055170,000414:
055171,000415: 7756 15413 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc