Source Code
|
These source-code files are part of a reconstructed copy of Comanche 45/2 (AKA Manche45 revision 2),
the final, flown mission release of the Apollo 10 Command Module (CM) Apollo Guidance
Computer (AGC) software. Comanche 45/2 was preceded by Comanche 44 and Comanche 45. The
reconstruction is believed to be exactly accurate, but in the absence of an actual Apollo-era
listing of Comanche 45/2, some explanation of the reconstruction process is needed
to insure confidence in that accuracy.
The starting point was the source code of Comanche 45 (itself previously accurately
reconstructed). Comanche 45 source code was then modified by incorporating changes
known from contemporary documentation to have been made between revisions 45 and 45/2.
The now-reconstructed Comanche 45/2 source code was
verified by assembling it and checking that the assembled code had
the expected known-correct memory-bank checksums.
Note that page numbers in the reconstructed code tend to match those in the Comanche 55, the
most-similar revision of Comanche for which we have access to an actual non-reconstructed hardcopy;
the source code would likely have different page numbers in a contemporary
Comanche 45 listing.
Annotations that were not present in the contemporary source code have been added to the reconstructed
code to justify each change relative to Comanche 44. Here's a guide to the Apollo documentation referenced
in those annotations:
Comments expected to have been present in the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
Project's GitHub repository.
|
059640,000002: ## Copyright: Public domain.
059641,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
059642,000004: ## Purpose: A section of Manche45 revision 2.
059643,000005: ## It is part of the reconstructed source code for the
059644,000006: ## final, flown release of the flight software for the Command
059645,000007: ## Module's (CM) Apollo Guidance Computer (AGC) for Apollo 10.
059646,000008: ## The code has been recreated from a copy of Comanche 055. It
059647,000009: ## has been adapted such that the resulting bugger words
059648,000010: ## exactly match those specified for Manche 45/2 in NASA drawing
059649,000011: ## 2021153D, which gives relatively high confidence that the
059650,000012: ## reconstruction is correct.
059651,000013: ## Assembler: yaYUL
059652,000014: ## Contact: Ron Burkey <info@sandroid.org>.
059653,000015: ## Website: www.ibiblio.org/apollo/index.html
059654,000016: ## Mod history: 2020-12-24 MAS Created from Comanche 45.
059655,000017:
|
|
Page 1404
|
059657,000019: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
059658,000020:
059659,000021: 43,3726 COUNT 02/PHASE
059660,000022: 5354 BLOCK 02
059661,000023: 4000 SETLOC FFTAG1
059662,000024: 4000 BANK
059663,000025:
059664,000026: 5354 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
059665,000027: 5355 30000 CAF 0
059666,000028: 5356 24002 INCR Q
059667,000029:
059668,000030: 5357 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
059669,000031: 5360 35363 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
059670,000032: 5361 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
059671,000033: 5362 14704 TCF BANKJUMP # PUTS Q INTO A
059672,000034: 5363 20440 CADR SETUPDSP
059673,000035:
059674,000036: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
059675,000037:
059676,000038: 5364 50002 CHECKMM INDEX Q
059677,000039: 5365 40000 CS 0
059678,000040: 5366 61011 AD MODREG
059679,000041: 5367 00006 EXTEND
059680,000042: 5370 16710 BZF Q+2
059681,000043: 5371 16706 TCF Q+1 # NO MATCH
059682,000044:
059683,000045: 5372 6711 TCQ = Q+2 +1
059684,000046:
059685,000047: 14,3762 BANK 14
059686,000048: 10,2000 SETLOC PHASETAB
059687,000049: 10,2000 BANK
059688,000050:
059689,000051: 10,2440 COUNT 10/PHASE
059690,000052:
059691,000053: 10,2440 00004 SETUPDSP INHINT
059692,000054: 10,2441 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
059693,000055: 10,2442 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
059694,000056: 10,2443 05134 TC NOVAC # NEWMODEX
059695,000057: 10,2444 1011 EBANK= MODREG
059696,000058: 10,2444 03441 60102 2CADR DSPMMJOB
059697,000059:
059698,000060: 10,2446 52071 DXCH RUPTREG1
059699,000061: 10,2447 00003 RELINT
059700,000062: 10,2450 52006 DXCH Z # RETURN
059701,000063:
059702,000064: 10,2451 40,3441 DSPMMJOB EQUALS DSPMMJB
059703,000065:
059704,000066: 5372 BLOCK 02
|
|
Page 1405
|
059706,000068: 4000 SETLOC FFTAG1
059707,000069: 4000 BANK
059708,000070:
|
|
Page 1406
|
059710,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
059711,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
059712,000074: # TC PHASCHNG
059713,000075: # OCT XXXXX
059714,000076: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
059715,000077: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
059716,000078: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
059717,000079: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
059718,000080: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
059719,000081: # LONGCALL TO BE RESTARTED.
059720,000082: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
059721,000083:
059722,000084: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
059723,000085: # TL0 00P PPP PPP GGG ,
059724,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
059725,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
059726,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
059727,000089: # IT IS SET TO 0. SOME EXAMPLES,
059728,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
059729,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
059730,000092:
059731,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
059732,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
059733,000095:
059734,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
059735,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
059736,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
059737,000099: # LOCATION
059738,000100:
059739,000101: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
059740,000102: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
059741,000103: # LONGBASE WAS SET THIS SINGLE ENTRY
059742,000104: # SHOULD BE A LONGCALL)
059743,000105:
059744,000106: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
059745,000107: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
059746,000108: # LONGCALL TO BE RESTARTED
059747,000109:
059748,000110: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
059749,000111: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
059750,000112: # TL0 1AD XXX CJW GGG
059751,000113: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
059752,000114: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
059753,000115: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1407
|
059755,000117: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
059756,000118: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
059757,000119: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
059758,000120: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
059759,000121: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
059760,000122: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
059761,000123: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
059762,000124: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
059763,000125: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
059764,000126: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
059765,000127: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
059766,000128: # AD+3 ALSO GO TO AD+3
059767,000129:
059768,000130: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
059769,000131: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
059770,000132: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
059771,000133: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
059772,000134: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
059773,000135: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
059774,000136: # LOCATION AD+5
059775,000137:
059776,000138: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
059777,000139: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
059778,000140:
059779,000141: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
059780,000142: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
059781,000143: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
059782,000144: # TL1 DAP PPP PPP GGG
059783,000145: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
059784,000146: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
059785,000147: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
059786,000148: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
059787,000149: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
059788,000150: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
059789,000151: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
059790,000152: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
059791,000153: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
059792,000154: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
059793,000155: # AD+5 GO TO AD+5
059794,000156:
059795,000157: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
059796,000158: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
059797,000159: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
059798,000160: # BY MEANS OF GROUP 5
|
|
Page 1408
|
059800,000162: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
059801,000163:
059802,000164: # SUMMARY OF BITS
059803,000165: # TYPE A TL0 00P PPP PPP GGG
059804,000166: # TYPE B TL1 DAP PPP PPP GGG
059805,000167: # TYPE C TL0 1AD XXX CJW GGG
059806,000168:
|
|
Page 1409
|
059808,000170: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
059809,000171: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
059810,000172: # CALLS ARE MADE IN THE FOLLOWING MANNER,
059811,000173: # TC 2PHSCHNG
059812,000174: # OCT XXXXX
059813,000175: # OCT YYYYY
059814,000176: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
059815,000177: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
059816,000178: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
059817,000179: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
059818,000180: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
059819,000181: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
059820,000182: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
059821,000183: # AD+4 FOR GROUP 5 PHASE INFORMATION
059822,000184:
059823,000185: 5372 COUNT 02/PHASE
059824,000186:
059825,000187: 5372 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
059826,000188: 5373 50002 NDX Q
059827,000189: 5374 30000 CA 0
059828,000190: 5375 24002 INCR Q
059829,000191: 5376 54072 TS TEMPP2
059830,000192:
059831,000193: 5377 75023 MASK OCT7
059832,000194: 5400 60000 DOUBLE
059833,000195: 5401 54071 TS TEMPG2
059834,000196:
059835,000197: 5402 30072 CA TEMPP2
059836,000198: 5403 75072 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
059837,000199: 5404 00006 EXTEND
059838,000200: 5405 75004 MP BIT12
059839,000201: 5406 56072 XCH TEMPP2
059840,000202:
059841,000203: 5407 75001 MASK BIT15
059842,000204: 5410 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
059843,000205:
059844,000206: 5411 15415 TCF PHASCHNG +3
059845,000207:
059846,000208: 5412 00004 PHASCHNG INHINT
059847,000209: 5413 35017 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
059848,000210: 5414 54066 TS TEMPSW2
059849,000211:
059850,000212: 5415 50002 NDX Q
059851,000213: 5416 30000 CA 0
059852,000214: 5417 24002 INCR Q
059853,000215: 5420 54065 TS TEMPSW
|
|
Page 1410
|
059855,000217: 5421 00006 EXTEND
059856,000218: 5422 35425 DCA ADRPCHN2 # OFF TO SWITCHED BANK
059857,000219: 5423 52006 DTCB
059858,000220:
059859,000221: 5424 E3,1400 EBANK= LST1
059860,000222: 5424 02451 20063 ADRPCHN2 2CADR PHSCHNG2
059861,000223:
059862,000224: 5426 22073 ONEORTWO LXCH TEMPBBCN
059863,000225: 5427 22006 LXCH BBANK
059864,000226: 5430 22073 LXCH TEMPBBCN
059865,000227:
059866,000228: 5431 75066 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
059867,000229: 5432 10000 CCS A
059868,000230: 5433 15474 TCF CHECKB # IT IS OF TYPE :B:
059869,000231:
059870,000232: 5434 30062 CA TEMPP
059871,000233: 5435 75011 MASK BIT7
059872,000234: 5436 10000 CCS A # SHALL WE USE THE OLD PRIORITY
059873,000235: 5437 15461 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
059874,000236:
059875,000237: 5440 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
059876,000238: 5441 31052 CA PHSPRDT1 -2
059877,000239: 5442 54070 TS TEMPPR
059878,000240:
059879,000241: 5443 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
059880,000242: 5444 75010 MASK BIT8
059881,000243: 5445 10000 CCS A
059882,000244: 5446 15465 TCF GETNEWNM
059883,000245:
059884,000246: 5447 30002 CA Q
059885,000247: 5450 54063 TS TEMPNM
059886,000248: 5451 30006 CA BB
059887,000249: 5452 00006 EXTEND # PICK UP USERS SUPERBANK
059888,000250: 5453 04007 ROR SUPERBNK
059889,000251: 5454 54064 TS TEMPBB
059890,000252:
059891,000253: 5455 35460 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
059892,000254: 5456 22073 LXCH TEMPBBCN
059893,000255: 5457 52006 DTCB
059894,000256:
059895,000257: 5460 02537 CON2ADR GENADR CON2
059896,000258:
059897,000259: 5461 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
059898,000260: 5462 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
059899,000261: 5463 24002 INCR Q # OBTAIN RETURN ADDRESS
059900,000262: 5464 15442 TCF CON1 -1
059901,000263:
059902,000264: 5465 00006 GETNEWNM EXTEND
|
|
Page 1411
|
059904,000266: 5466 50002 INDEX Q
059905,000267: 5467 30001 DCA 0
059906,000268: 5470 52064 DXCH TEMPNM
059907,000269: 5471 35016 CA TWO
059908,000270: 5472 26002 ADS Q # OBTAIN RETURN ADDRESS
059909,000271:
059910,000272: 5473 15455 TCF TOCON2
059911,000273:
059912,000274: 5474 5066 OCT14000 EQUALS PRIO14
059913,000275: 5474 0061 TEMPG EQUALS ITEMP1
059914,000276: 5474 0062 TEMPP EQUALS ITEMP2
059915,000277: 5474 0063 TEMPNM EQUALS ITEMP3
059916,000278: 5474 0064 TEMPBB EQUALS ITEMP4
059917,000279: 5474 0065 TEMPSW EQUALS ITEMP5
059918,000280: 5474 0066 TEMPSW2 EQUALS ITEMP6
059919,000281: 5474 0070 TEMPPR EQUALS RUPTREG1
059920,000282: 5474 0071 TEMPG2 EQUALS RUPTREG2
059921,000283: 5474 0072 TEMPP2 EQUALS RUPTREG3
059922,000284:
059923,000285: 5474 0073 TEMPBBCN EQUALS RUPTREG4
059924,000286: 5474 0000006 BB EQUALS BBANK
059925,000287:
059926,000288: 14,3762 BANK 14
059927,000289: 10,2000 SETLOC PHASETAB
059928,000290: 10,2000 BANK
059929,000291:
059930,000292: 10,2451 E3,1436 EBANK= PHSNAME1
059931,000293: 10,2451 COUNT 10/PHASE
059932,000294:
059933,000295: 10,2451 22073 PHSCHNG2 LXCH TEMPBBCN
059934,000296: 10,2452 30065 CA TEMPSW
059935,000297: 10,2453 75023 MASK OCT7
059936,000298: 10,2454 60000 DOUBLE
059937,000299: 10,2455 54061 TS TEMPG
059938,000300:
059939,000301: 10,2456 30065 CA TEMPSW
059940,000302: 10,2457 75072 MASK OCT17770
059941,000303: 10,2460 00006 EXTEND
059942,000304: 10,2461 75004 MP BIT12
059943,000305: 10,2462 54062 TS TEMPP
059944,000306:
059945,000307: 10,2463 30065 CA TEMPSW
059946,000308: 10,2464 74105 MASK OCT60000
059947,000309: 10,2465 56065 XCH TEMPSW
059948,000310: 10,2466 75066 MASK OCT14000
059949,000311: 10,2467 10000 CCS A
059950,000312: 10,2470 15426 TCF ONEORTWO
059951,000313:
|
|
Page 1412
|
059953,000315: 10,2471 30062 CA TEMPP # START STORING THE PHASE INFORMATION
059954,000316: 10,2472 50061 NDX TEMPG
059955,000317: 10,2473 54751 TS PHASE1 -2
059956,000318:
059957,000319: 10,2474 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
059958,000320: 10,2475 12511 TCF BELOW2 # IT:S A PHASCHNG
059959,000321:
059960,000322: 10,2476 12477 TCF +1 # IT:S A 2PHSCHNG
059961,000323: 10,2477 40072 CS TEMPP2
059962,000324: 10,2500 22072 LXCH TEMPP2
059963,000325: 10,2501 50071 NDX TEMPG2
059964,000326: 10,2502 52751 DXCH -PHASE1 -2
059965,000327:
059966,000328: 10,2503 10066 CCS TEMPSW2
059967,000329: 10,2504 12505 NOOP # CAN:T GET HERE
059968,000330: 10,2505 12511 TCF BELOW2
059969,000331:
059970,000332: 10,2506 40025 CS TIME1
059971,000333: 10,2507 50071 NDX TEMPG2
059972,000334: 10,2510 55051 TS TBASE1 -2
059973,000335:
059974,000336: 10,2511 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
059975,000337: 10,2512 12525 TCF BELOW3 # SET LONGBASE ONLY
059976,000338: 10,2513 12530 TCF BELOW4 # SET NEITHER
059977,000339:
059978,000340: 10,2514 40025 CS TIME1 # SET TBASE TO BEGIN WITH
059979,000341: 10,2515 50061 NDX TEMPG
059980,000342: 10,2516 55051 TS TBASE1 -2
059981,000343:
059982,000344: 10,2517 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
059983,000345: 10,2520 62523 AD BIT14COM
059984,000346: 10,2521 10000 CCS A
059985,000347: 10,2522 12523 NOOP # ***** CANT GET HERE *****
059986,000348: 10,2523 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
059987,000349: 10,2524 12530 TCF BELOW4 # NO WE NEED ONLY SET TBASE
059988,000350:
059989,000351: 10,2525 00006 BELOW3 EXTEND # SET LONGBASE
059990,000352: 10,2526 30025 DCA TIME2
059991,000353: 10,2527 53136 DXCH LONGBASE
059992,000354:
059993,000355: 10,2530 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
059994,000356: 10,2531 50061 NDX TEMPG
059995,000357: 10,2532 54750 TS -PHASE1 -2
059996,000358:
059997,000359: 10,2533 30002 CA Q
059998,000360: 10,2534 22073 LXCH TEMPBBCN
059999,000361: 10,2535 00003 RELINT
060000,000362: 10,2536 52006 DTCB
060001,000363: 10,2537 22073 CON2 LXCH TEMPBBCN
|
|
Page 1413
|
060003,000365: 10,2540 30062 CA TEMPP
060004,000366: 10,2541 50061 NDX TEMPG
060005,000367: 10,2542 54751 TS PHASE1 -2
060006,000368:
060007,000369: 10,2543 30070 CA TEMPPR
060008,000370: 10,2544 50061 NDX TEMPG
060009,000371: 10,2545 55052 TS PHSPRDT1 -2
060010,000372:
060011,000373: 10,2546 00006 EXTEND
060012,000374: 10,2547 30064 DCA TEMPNM
060013,000375: 10,2550 50061 NDX TEMPG
060014,000376: 10,2551 53435 DXCH PHSNAME1 -2
060015,000377:
060016,000378: 10,2552 12474 TCF BELOW1
060017,000379:
060018,000380: 5474 BLOCK 02
060019,000381: 4000 SETLOC FFTAG1
060020,000382: 4000 BANK
060021,000383:
060022,000384: 5474 COUNT 02/PHASE
060023,000385:
060024,000386: 5474 75004 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
060025,000387: 5475 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
060026,000388: 5476 15461 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
060027,000389:
060028,000390: 5477 15440 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
060029,000391:
060030,000392:
060031,000393:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc