Source Code
|
These source-code files are part of a reconstructed copy of Comanche 72/3 (AKA Manche72 revision 3),
the final, flown mission release of the Apollo Guidance Computer (AGC) Command Module (CM) software
for Apollo 13.
The starting point was the source code of Comanche 72 (itself previously reconstructed). Comanche 72
source code was then modified by incorporating changes known from contemporary documentation to have
been made between revisions 72 and 72/3. The resulting code assembles to have identical
memory-bank checksums as those specified in NASA drawing 2021153G; this gives reasonably
high confidence that the changes that have been made are correct. In places where
ambiguity exists, this ambiguity is discussed in "## Reconstruction:" comments.
Since no contemporary listings of Comanche 72/3 are available as source material,
all comments and labels are approximate.
They have been taken from other AGC programs where possible, or, in some places, written
from scratch to match what we believe would have been in the original listing.
|
058591,000002: ## Copyright: Public domain.
058592,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
058593,000004: ## Purpose: A section of Manche72 revision 3.
058594,000005: ## It is part of the reconstructed source code for the final, flown
058595,000006: ## release of the software for the Command Module's (CM) Apollo
058596,000007: ## Guidance Computer (AGC) for Apollo 13. No original listings
058597,000008: ## of this program are available; instead, this file was recreated
058598,000009: ## from a reconstructed copy of Comanche 072. It has been adapted
058599,000010: ## such that the resulting bugger words exactly match those
058600,000011: ## specified for Manche72 revision 3 in NASA drawing 2021153G,
058601,000012: ## which gives relatively high confidence that the reconstruction
058602,000013: ## is correct.
058603,000014: ## Assembler: yaYUL
058604,000015: ## Contact: Ron Burkey <info@sandroid.org>.
058605,000016: ## Website: www.ibiblio.org/apollo/index.html
058606,000017: ## Mod history: 2024-05-19 MAS Created from Comanche 072.
058607,000018:
058608,000019: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
058609,000020:
058610,000021: 43,3736 COUNT 02/PHASE
058611,000022: 5370 BLOCK 02
058612,000023: 4000 SETLOC FFTAG1
058613,000024: 4000 BANK
058614,000025:
058615,000026: 5370 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
058616,000027: 5371 30000 CAF 0
058617,000028: 5372 24002 INCR Q
058618,000029:
058619,000030: 5373 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
058620,000031: 5374 35377 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
058621,000032: 5375 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
058622,000033: 5376 14720 TCF BANKJUMP # PUTS Q INTO A
058623,000034: 5377 20440 CADR SETUPDSP
058624,000035:
058625,000036: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
058626,000037:
058627,000038: 5400 50002 CHECKMM INDEX Q
058628,000039: 5401 40000 CS 0
058629,000040: 5402 61011 AD MODREG
058630,000041: 5403 00006 EXTEND
058631,000042: 5404 16710 BZF Q+2
058632,000043: 5405 16706 TCF Q+1 # NO MATCH
058633,000044:
058634,000045: 5406 6711 TCQ = Q+2 +1
058635,000046:
058636,000047: 14,3765 BANK 14
058637,000048: 10,2000 SETLOC PHASETAB
058638,000049: 10,2000 BANK
058639,000050:
058640,000051: 10,2440 COUNT 10/PHASE
058641,000052:
058642,000053: 10,2440 00004 SETUPDSP INHINT
058643,000054: 10,2441 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
058644,000055: 10,2442 34371 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
058645,000056: 10,2443 05150 TC NOVAC # NEWMODEX
058646,000057: 10,2444 1011 EBANK= MODREG
058647,000058: 10,2444 03450 60102 2CADR DSPMMJOB
058648,000059:
058649,000060: 10,2446 52071 DXCH RUPTREG1
058650,000061: 10,2447 00003 RELINT
058651,000062: 10,2450 52006 DXCH Z # RETURN
058652,000063:
058653,000064: 10,2451 40,3450 DSPMMJOB EQUALS DSPMMJB
058654,000065:
058655,000066: 5406 BLOCK 02
058656,000067: 4000 SETLOC FFTAG1
058657,000068: 4000 BANK
058658,000069:
058659,000070: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
058660,000071: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
058661,000072: # TC PHASCHNG
058662,000073: # OCT XXXXX
058663,000074: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
058664,000075: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
058665,000076: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
058666,000077: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
058667,000078: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
058668,000079: # LONGCALL TO BE RESTARTED.
058669,000080: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
058670,000081:
058671,000082: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
058672,000083: # TL0 00P PPP PPP GGG ,
058673,000084: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
058674,000085: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
058675,000086: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
058676,000087: # IT IS SET TO 0. SOME EXAMPLES,
058677,000088: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
058678,000089: # OCT 00003 MAKING GROUP 3 INACTIVE
058679,000090:
058680,000091: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
058681,000092: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
058682,000093:
058683,000094: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
058684,000095: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
058685,000096: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
058686,000097: # LOCATION
058687,000098:
058688,000099: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
058689,000100: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
058690,000101: # LONGBASE WAS SET THIS SINGLE ENTRY
058691,000102: # SHOULD BE A LONGCALL)
058692,000103:
058693,000104: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
058694,000105: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
058695,000106: # LONGCALL TO BE RESTARTED
058696,000107:
058697,000108: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
058698,000109: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
058699,000110: # TL0 1AD XXX CJW GGG
058700,000111: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
058701,000112: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
058702,000113: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
058703,000114: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
058704,000115: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
058705,000116: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
058706,000117: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
058707,000118: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
058708,000119: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
058709,000120: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
058710,000121: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
058711,000122: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
058712,000123: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
058713,000124: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
058714,000125: # AD+3 ALSO GO TO AD+3
058715,000126:
058716,000127: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
058717,000128: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
058718,000129: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
058719,000130: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
058720,000131: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
058721,000132: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
058722,000133: # LOCATION AD+5
058723,000134:
058724,000135: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
058725,000136: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
058726,000137:
058727,000138: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
058728,000139: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
058729,000140: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
058730,000141: # TL1 DAP PPP PPP GGG
058731,000142: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
058732,000143: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
058733,000144: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
058734,000145: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
058735,000146: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
058736,000147: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
058737,000148: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
058738,000149: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
058739,000150: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
058740,000151: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
058741,000152: # AD+5 GO TO AD+5
058742,000153:
058743,000154: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
058744,000155: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
058745,000156: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
058746,000157: # BY MEANS OF GROUP 5
058747,000158: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
058748,000159:
058749,000160: # SUMMARY OF BITS
058750,000161: # TYPE A TL0 00P PPP PPP GGG
058751,000162: # TYPE B TL1 DAP PPP PPP GGG
058752,000163: # TYPE C TL0 1AD XXX CJW GGG
058753,000164:
058754,000165: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
058755,000166: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
058756,000167: # CALLS ARE MADE IN THE FOLLOWING MANNER,
058757,000168: # TC 2PHSCHNG
058758,000169: # OCT XXXXX
058759,000170: # OCT YYYYY
058760,000171: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
058761,000172: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
058762,000173: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
058763,000174: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
058764,000175: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
058765,000176: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
058766,000177: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
058767,000178: # AD+4 FOR GROUP 5 PHASE INFORMATION
058768,000179:
058769,000180: 5406 COUNT 02/PHASE
058770,000181:
058771,000182: 5406 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
058772,000183: 5407 50002 NDX Q
058773,000184: 5410 30000 CA 0
058774,000185: 5411 24002 INCR Q
058775,000186: 5412 54072 TS TEMPP2
058776,000187:
058777,000188: 5413 75037 MASK OCT7
058778,000189: 5414 60000 DOUBLE
058779,000190: 5415 54071 TS TEMPG2
058780,000191:
058781,000192: 5416 30072 CA TEMPP2
058782,000193: 5417 75106 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
058783,000194: 5420 00006 EXTEND
058784,000195: 5421 75020 MP BIT12
058785,000196: 5422 56072 XCH TEMPP2
058786,000197:
058787,000198: 5423 75015 MASK BIT15
058788,000199: 5424 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
058789,000200:
058790,000201: 5425 15431 TCF PHASCHNG +3
058791,000202:
058792,000203: 5426 00004 PHASCHNG INHINT
058793,000204: 5427 35033 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
058794,000205: 5430 54066 TS TEMPSW2
058795,000206:
058796,000207: 5431 50002 NDX Q
058797,000208: 5432 30000 CA 0
058798,000209: 5433 24002 INCR Q
058799,000210: 5434 54065 TS TEMPSW
058800,000211: 5435 00006 EXTEND
058801,000212: 5436 35441 DCA ADRPCHN2 # OFF TO SWITCHED BANK
058802,000213: 5437 52006 DTCB
058803,000214:
058804,000215: 5440 E3,1400 EBANK= LST1
058805,000216: 5440 02451 20063 ADRPCHN2 2CADR PHSCHNG2
058806,000217:
058807,000218: 5442 22073 ONEORTWO LXCH TEMPBBCN
058808,000219: 5443 22006 LXCH BBANK
058809,000220: 5444 22073 LXCH TEMPBBCN
058810,000221:
058811,000222: 5445 75102 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
058812,000223: 5446 10000 CCS A
058813,000224: 5447 15510 TCF CHECKB # IT IS OF TYPE :B:
058814,000225:
058815,000226: 5450 30062 CA TEMPP
058816,000227: 5451 75025 MASK BIT7
058817,000228: 5452 10000 CCS A # SHALL WE USE THE OLD PRIORITY
058818,000229: 5453 15475 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
058819,000230:
058820,000231: 5454 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
058821,000232: 5455 31052 CA PHSPRDT1 -2
058822,000233: 5456 54070 TS TEMPPR
058823,000234:
058824,000235: 5457 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
058825,000236: 5460 75024 MASK BIT8
058826,000237: 5461 10000 CCS A
058827,000238: 5462 15501 TCF GETNEWNM
058828,000239:
058829,000240: 5463 30002 CA Q
058830,000241: 5464 54063 TS TEMPNM
058831,000242: 5465 30006 CA BB
058832,000243: 5466 00006 EXTEND # PICK UP USERS SUPERBANK
058833,000244: 5467 04007 ROR SUPERBNK
058834,000245: 5470 54064 TS TEMPBB
058835,000246:
058836,000247: 5471 35474 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
058837,000248: 5472 22073 LXCH TEMPBBCN
058838,000249: 5473 52006 DTCB
058839,000250:
058840,000251: 5474 02537 CON2ADR GENADR CON2
058841,000252:
058842,000253: 5475 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
058843,000254: 5476 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
058844,000255: 5477 24002 INCR Q # OBTAIN RETURN ADDRESS
058845,000256: 5500 15456 TCF CON1 -1
058846,000257:
058847,000258: 5501 00006 GETNEWNM EXTEND
058848,000259: 5502 50002 INDEX Q
058849,000260: 5503 30001 DCA 0
058850,000261: 5504 52064 DXCH TEMPNM
058851,000262: 5505 35032 CA TWO
058852,000263: 5506 26002 ADS Q # OBTAIN RETURN ADDRESS
058853,000264:
058854,000265: 5507 15471 TCF TOCON2
058855,000266:
058856,000267: 5510 5102 OCT14000 EQUALS PRIO14
058857,000268: 5510 0061 TEMPG EQUALS ITEMP1
058858,000269: 5510 0062 TEMPP EQUALS ITEMP2
058859,000270: 5510 0063 TEMPNM EQUALS ITEMP3
058860,000271: 5510 0064 TEMPBB EQUALS ITEMP4
058861,000272: 5510 0065 TEMPSW EQUALS ITEMP5
058862,000273: 5510 0066 TEMPSW2 EQUALS ITEMP6
058863,000274: 5510 0070 TEMPPR EQUALS RUPTREG1
058864,000275: 5510 0071 TEMPG2 EQUALS RUPTREG2
058865,000276: 5510 0072 TEMPP2 EQUALS RUPTREG3
058866,000277:
058867,000278: 5510 0073 TEMPBBCN EQUALS RUPTREG4
058868,000279: 5510 0000006 BB EQUALS BBANK
058869,000280:
058870,000281: 14,3765 BANK 14
058871,000282: 10,2000 SETLOC PHASETAB
058872,000283: 10,2000 BANK
058873,000284:
058874,000285: 10,2451 E3,1436 EBANK= PHSNAME1
058875,000286: 10,2451 COUNT 10/PHASE
058876,000287:
058877,000288: 10,2451 22073 PHSCHNG2 LXCH TEMPBBCN
058878,000289: 10,2452 30065 CA TEMPSW
058879,000290: 10,2453 75037 MASK OCT7
058880,000291: 10,2454 60000 DOUBLE
058881,000292: 10,2455 54061 TS TEMPG
058882,000293:
058883,000294: 10,2456 30065 CA TEMPSW
058884,000295: 10,2457 75106 MASK OCT17770
058885,000296: 10,2460 00006 EXTEND
058886,000297: 10,2461 75020 MP BIT12
058887,000298: 10,2462 54062 TS TEMPP
058888,000299:
058889,000300: 10,2463 30065 CA TEMPSW
058890,000301: 10,2464 74105 MASK OCT60000
058891,000302: 10,2465 56065 XCH TEMPSW
058892,000303: 10,2466 75102 MASK OCT14000
058893,000304: 10,2467 10000 CCS A
058894,000305: 10,2470 15442 TCF ONEORTWO
058895,000306:
058896,000307: 10,2471 30062 CA TEMPP # START STORING THE PHASE INFORMATION
058897,000308: 10,2472 50061 NDX TEMPG
058898,000309: 10,2473 54751 TS PHASE1 -2
058899,000310:
058900,000311: 10,2474 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
058901,000312: 10,2475 12511 TCF BELOW2 # IT:S A PHASCHNG
058902,000313:
058903,000314: 10,2476 12477 TCF +1 # IT:S A 2PHSCHNG
058904,000315: 10,2477 40072 CS TEMPP2
058905,000316: 10,2500 22072 LXCH TEMPP2
058906,000317: 10,2501 50071 NDX TEMPG2
058907,000318: 10,2502 52751 DXCH -PHASE1 -2
058908,000319:
058909,000320: 10,2503 10066 CCS TEMPSW2
058910,000321: 10,2504 12505 NOOP # CAN:T GET HERE
058911,000322: 10,2505 12511 TCF BELOW2
058912,000323:
058913,000324: 10,2506 40025 CS TIME1
058914,000325: 10,2507 50071 NDX TEMPG2
058915,000326: 10,2510 55051 TS TBASE1 -2
058916,000327:
058917,000328: 10,2511 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
058918,000329: 10,2512 12525 TCF BELOW3 # SET LONGBASE ONLY
058919,000330: 10,2513 12530 TCF BELOW4 # SET NEITHER
058920,000331:
058921,000332: 10,2514 40025 CS TIME1 # SET TBASE TO BEGIN WITH
058922,000333: 10,2515 50061 NDX TEMPG
058923,000334: 10,2516 55051 TS TBASE1 -2
058924,000335:
058925,000336: 10,2517 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
058926,000337: 10,2520 62523 AD BIT14COM
058927,000338: 10,2521 10000 CCS A
058928,000339: 10,2522 12523 NOOP # ***** CANT GET HERE *****
058929,000340: 10,2523 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
058930,000341: 10,2524 12530 TCF BELOW4 # NO WE NEED ONLY SET TBASE
058931,000342:
058932,000343: 10,2525 00006 BELOW3 EXTEND # SET LONGBASE
058933,000344: 10,2526 30025 DCA TIME2
058934,000345: 10,2527 53136 DXCH LONGBASE
058935,000346:
058936,000347: 10,2530 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
058937,000348: 10,2531 50061 NDX TEMPG
058938,000349: 10,2532 54750 TS -PHASE1 -2
058939,000350:
058940,000351: 10,2533 30002 CA Q
058941,000352: 10,2534 22073 LXCH TEMPBBCN
058942,000353: 10,2535 00003 RELINT
058943,000354: 10,2536 52006 DTCB
058944,000355: 10,2537 22073 CON2 LXCH TEMPBBCN
058945,000356: 10,2540 30062 CA TEMPP
058946,000357: 10,2541 50061 NDX TEMPG
058947,000358: 10,2542 54751 TS PHASE1 -2
058948,000359:
058949,000360: 10,2543 30070 CA TEMPPR
058950,000361: 10,2544 50061 NDX TEMPG
058951,000362: 10,2545 55052 TS PHSPRDT1 -2
058952,000363:
058953,000364: 10,2546 00006 EXTEND
058954,000365: 10,2547 30064 DCA TEMPNM
058955,000366: 10,2550 50061 NDX TEMPG
058956,000367: 10,2551 53435 DXCH PHSNAME1 -2
058957,000368:
058958,000369: 10,2552 12474 TCF BELOW1
058959,000370:
058960,000371: 5510 BLOCK 02
058961,000372: 4000 SETLOC FFTAG1
058962,000373: 4000 BANK
058963,000374:
058964,000375: 5510 COUNT 02/PHASE
058965,000376:
058966,000377: 5510 75020 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
058967,000378: 5511 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
058968,000379: 5512 15475 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
058969,000380:
058970,000381: 5513 15454 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
058971,000382:
058972,000383:
058973,000384:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc