Source Code
|
These source-code files were obtained by digitally photographing
a Solarium 55 (Apollo 6) program listing from the American Computer Museum in
Bozeman, Montana. Photography was by Ron Burkey, with assistance from
museum curator George Keremedjiev and Montana
State University curator Kim Scott. The listing originally belonged to Eldon C. Hall,
who donated it to the museum. Volunteers then manually typed in the
source code or else modified similar pre-existing Colossus 249
(Apollo 9) source files to incorporate changes, although this transcription was
principally done by Jim Lawton and corrected by Ron Burkey.
Notations on the program listing read, in part:
YUL SYSTEM FOR AGC4: REVISION 0 OF PROGRAM SOLRUM55
BY NASA 1021108-021 DEC. 4, 1966
Note that the date is the date of the printout, not the date of the program revision.
Due to statements by Jay Sampson, the original contractor from AC Electronics
who created Solarium 54 (Apollo 4)
from the earlier Corona (AS-202 mission) program, it is believed that Solarium 54 and
Solarium 55 (Apollo 6) are actually identical programs. The change in numbering,
from 54 to 55, is believed to be for some administrative purpose. Thus, it is believed
that the source-code represented here is equally appropriate for both Apollo 4 and
Apollo 6 missions.
|
000030,000002: ## Copyright: Public domain.
000031,000003: ## Filename: ASSEMBLY_AND_OPERATION_INFORMATION.agc
000032,000004: ## Purpose: Part of the source code for Solarium build 55. This
000033,000005: ## is for the Command Module's (CM) Apollo Guidance
000034,000006: ## Computer (AGC), for Apollo 6.
000035,000007: ## Assembler: yaYUL --block1
000036,000008: ## Contact: Jim Lawton <jim DOT lawton AT gmail DOT com>
000037,000009: ## Website: www.ibiblio.org/apollo/index.html
000038,000010: ## Page Scans: www.ibiblio.org/apollo/ScansForConversion/Solarium055/
000039,000011: ## Mod history: 2009-09-11 JL Created.
000040,000012: ## 2016-12-28 RSB Proofed comment text using octopus/ProoferComments,
000041,000013: ## and fixed errors found.
000042,000014:
|
|
Page 1
|
000044,000016:
000045,000017: # TABLE OF LOG CARDS (ALL LOG CARDS ARE TWO SPACED)
000046,000018:
000047,000019: # ASSEMBLY AND OPERATION INFORMATION
000048,000020: # ERASABLE ASSIGNMENTS
000049,000021: # INTERRUPT TRANSFER ROUTINES
000050,000022: # FIXED-FIXED INTERPRETER SECTION
000051,000023: # BANK 03 INTERPRETER SECTION
000052,000024: # EXECUTIVE
000053,000025: # WAITLIST
000054,000026: # RESTART CONTROL
000055,000027: # 501 RESTART TABLES AND ROUTINES
000056,000028: # FRESH START AND RESTART
000057,000029: # DOWN-TELEMETRY PROGRAM
000058,000030: # T4RUPT OUTPUT CONTROL PROGRAMS
000059,000031: # MODE SWITCHING AND MARK ROUTINES
000060,000032: # IMU COMPENSATION PACKAGE
000061,000033: # IRIG PULSE-TORQUING ROUTINES
000062,000034: # EXTENDED VERBS FOR MODING
000063,000035: # AGC SELF-CHECK
000064,000036: # INTER-BANK COMMUNICATION
000065,000037: # ALARM AND DISPLAY PROCEDURES
000066,000038: # ORBITAL INTEGRATION PROGRAM
000067,000039: # ORBITAL INTEGRATION FOR 501
000068,000040: # PRELAUNCH ALIGNMENT PROGRAM
000069,000041: # INFLIGHT ALIGNMENT PROGRAM
000070,000042: # RTB OP CODES
000071,000043: # IMU PERFORMANCE TESTS 1
000072,000044: # IMU PERFORMANCE TESTS 2
000073,000045: # INFLIGHT ALIGNMENT SUBROUTINES
000074,000046: # KEYRUPT, UPRUPT, FRESH START
000075,000047: # PINBALL GAME BUTTONS AND LIGHTS
000076,000048: # 501 MISSION CONTROL PROGRAM
000077,000049: # POWERED FLIGHT SUBROUTINES
000078,000050: # TIME OF FREE-FALL CALCULATIONS
000079,000051: # DUMMY 501 INITIALISATION
000080,000052: # RE-ENTRY CONTROL
000081,000053: # AVERAGE G INTEGRATOR
000082,000054: # VERIFICATION ASSISTANCE PROGRAMS
000083,000055: # SUM-CHECK END OF RECORD MARKS
000084,000056:
|
|
Page 2
|
000086,000058:
000087,000059: # TABLE OF ERROR CODES
000088,000060:
000089,000061:
000090,000062: # OPTICS SUB-SYSTEM
000091,000063:
000092,000064: # 00101 ZERO CDU SWITCH ALTERED BEFORE EXPIRATION OF 30 SECOND WAIT
000093,000065: # 00102 COMPUTER UNABLE TO ACHIEVE DESIRED OPTICS MODE
000094,000066: # 00103 SXT-ON SWITCH TURNED ON WITH OPTICS NOT IN ZERO CDU MODE
000095,000067: # 00104 NO VAC AREA AVAILABLE FOR MARKS
000096,000068: # 00105 INTERNAL MARKS REQUEST WITH MARK SYSTEM BUSY
000097,000069: # 00106 SXT-ON SWITCH NOT IN DESIRED STATE AT MARK TIME OR MARK WITH ALL REQUESTED MARKS ACCEPTED
000098,000070: # 00107 MARK ACCEPT WITH MARK SYSTEM NOT IN USE
000099,000071: # 00110 MARK ACCEPT WITH ALL REQUESTED MARKS ACCEPTED, OR NO MARKS SINCE INITIALIZATION OR LAST MARK ACCEPT
000100,000072:
000101,000073: # IMU SUB-SYSTEM
000102,000074:
000103,000075: # 00201 CDU ZERO SWITCH ALTERED BEFORE EXPIRATION OF 30 SECOND WAIT
000104,000076: # 00202 COMPUTER UNABLE TO ACHIEVE DESIRED MODE
000105,000077: # 00203 NO IMU MODE INDICATED TO COMPUTER
000106,000078: # 00204 MODE SWITCH WITH TRNSW IN COMPUTER CONTROL, BUT COMPUTER NOT COMMANDING
000107,000079:
000108,000080: # GENERAL MISSION PROGRAM ERRORS (ERROR RETURN ON IMUSTALL, ETC.)
000109,000081:
000110,000082: # 00301 CURTAINS PROGRAM
000111,000083:
000112,000084: # PROCEDURAL DIFFICULTY
000113,000085:
000114,000086: # 00401 DESIRED GIMBAL ANGLES YIELD GIMBAL LOCK (MGA GREATER THAN 60 DEGREES).
000115,000087: # 00402 STAR OUT OF FIELD OF VIEW
000116,000088: # 00403 STAR OUT OF FIELD OF VIEW
000117,000089:
000118,000090: # COMPUTER HARDWARE MALFUNCTIONS
000119,000091:
000120,000092: # 01101 RUPT2 OCCURRED
000121,000093: # 01102 AGC SELF TEST ERROR (Q IN SFAIL)
000122,000094: # 01103 UNUSED CCS BRANCH EXECUTED
000123,000095: # 01104 C-RELAY FAILED DURING C-RELAY TEST
000124,000096:
000125,000097: # LIST OVERFLOWS (ALL ABORTS)
000126,000098:
000127,000099: # 01201 EXECUTIVE OVERFLOW - NO VAC AREAS
000128,000100: # 01202 EXECUTIVE OVERFLOW - NO CORE SETS
000129,000101: # 01203 WAITLIST OVERFLOW - TOO MANY TASKS
000130,000102: # 01204 SLIGHT VARIATION OF 01203
000131,000103: # 01205 MASTER CONTROL OVERFLOW - TOO MANY JOBS WAITING
000132,000104: # 01206 KEYBOARD + DISPLAY WAITING LINE OVERFLOW
000133,000105: # 01207 NO VAC AREA FOR MARKS
000134,000106: # 01210 SOMETHING ALREADY WAITING IN IMUSTALL
000135,000107:
000136,000108: # INTERPRETER ERRORS
000137,000109:
000138,000110: # 01301 ARCCOS-ARCSIN INPUT ANGLE TOO LARGE
000139,000111: # 01302 SQRT CALLED WITH NEGATIVE ARGUMENT
000140,000112:
000141,000113: # DISPLAY ALARMS
000142,000114:
000143,000115: # 01401 (VG) INCREASING - LOSS OF CONTROL
|
|
Page 3
|
000145,000117: # 01402 (DELV) TOO LOW - ENGINE NOT ON
000146,000118: # 01403 501 ABORT, WILL OVERSHOOT TARGET.
000147,000119: # 01404 501 ABORT, PRESENT SMA LESS THAN RE/2
000148,000120: # 01405 501 ABORT, COT SQ(GAMMA E) NEGATIVE.
000149,000121: # 01406 501 ABORT, FREE-FALL ANGLE EXEEDS ---
000150,000122: # 01407 COMMANDED CDUZ EXCEEDS 60 DEGREES
000151,000123: # 01411 TIME TO INCORPORATE AVE G UPDATE ALREADY PAST
000152,000124:
000153,000125: # KEYBOARD AND DISPLAY PROGRAM
000154,000126:
000155,000127: # 01501 KEYBOARD AND DISPLAY ALARM DURING INTERNAL USE (NVSUB). ABORT
000156,000128:
|
|
Page 4
|
000158,000130:
000159,000131: # VERB DEFINITIONS
000160,000132:
000161,000133:
000162,000134:
000163,000135: # REGULAR VERBS
000164,000136: # 01 DISPLAY OCTAL COMP 1 (R1)
000165,000137: # 02 DISPLAY OCTAL COMP 2 (R1)
000166,000138: # 03 DISPLAY OCTAL COMP 3 (R1)
000167,000139: # 04 DISPLAY OCTAL COMP 1,2 (R1,R2)
000168,000140: # 05 DISPLAY OCTAL COMP 1,2,3 (R1,R2,R3)
000169,000141: # 06 DECIMAL DISPLAY
000170,000142: # 07 DP DECIMAL DISPLAY (R1,R2)
000171,000143: # 10 REQUEST WAITLIST
000172,000144: # 11 MONITOR OCT COMP 1 (R1)
000173,000145: # 12 MONITOR OCT COMP 2 (R1)
000174,000146: # 13 MONITOR OCT COMP 3 (R1)
000175,000147: # 14 MONITOR OCT COMP 1,2 (R1)
000176,000148: # 15 MONITOR OCT COMP 1,2,3 (R1,R2,R3)
000177,000149: # 16 MONITOR DECIMAL
000178,000150: # 17 MONITOR DP DECIMAL (R1,R2)
000179,000151: # 20 REQUEST EXECUTIVE
000180,000152: # 21 LOAD COMP 1 (R1)
000181,000153: # 22 LOAD COMP 2 (R2)
000182,000154: # 23 LOAD COMP 3 (R3)
000183,000155: # 24 LOAD COMP 1,2 (R1,R2)
000184,000156: # 25 LOAD COMP 1,2,3 (R1,R2,R3)
000185,000157: # 26 SPARE
000186,000158: # 27 SPARE
000187,000159: # 30 SPARE
000188,000160: # 31 BANK DISPLAY
000189,000161: # 32 C(R2) INTO R3, C(R1) INTO R2
000190,000162: # 33 PROCEED WITHOUT DATA
000191,000163: # 34 TERMINATE CURRENT TEST OR LOAD REQUEST
000192,000164: # 35 RELEASE DISPLAY SYSTEM
000193,000165: # 36 FRESH START
000194,000166: # 37 CHANGE MAJOR MODE
000195,000167: # END OF REGULAR VERBS
000196,000168:
000197,000169:
000198,000170:
000199,000171: # EXTENDED VERBS
000200,000172: # 40 ZERO (USED WITH NOUN ICDU OR OCDU)
000201,000173: # 41 COARSE ALIGN (USED WITH NOUN ICDU OR OCDU)
000202,000174: # 42 FINE ALIGN IMU
000203,000175: # 43 LOCK IMU
000204,000176: # 44 SET IMU TO ATTITUDE CONTROL
000205,000177: # 45 SET IMU TO RE-ENTRY CONTROL
000206,000178: # 46 RETURN IMU TO COARSE ALIGN
000207,000179: # 47 OPTICAL TRACKER ON (NOT IN USE YET)
000208,000180: # 50 PLEASE PERFORM
|
|
Page 5
|
000210,000182: # 51 PLEASE MARK
000211,000183: # 52 MARK REJECT (UNTIL BUTTON AVAILABLE)
000212,000184: # 53 FREE (USED WITH NOUN ICDU OR OCDU)
000213,000185: # 54 PULSE TORQUE GYROS
000214,000186: # 55 ALIGN TIME
000215,000187: # 56 PERFORM BANKSUM
000216,000188: # 57 DO SYSTEM TEST
000217,000189: # 60 PREPARE FOR STANDBY
000218,000190: # 61 RECOVER FROM STANDBY
000219,000191: # 62 ILLEGAL VERB
000220,000192: # 63 ILLEGAL VERB
000221,000193: # 64 ILLEGAL VERB
000222,000194: # 65 ILLEGAL VERB
000223,000195: # 66 ILLEGAL VERB
000224,000196: # 67 ILLEGAL VERB
000225,000197: # 70 ILLEGAL VERB
000226,000198: # 71 DO TFFMIN UPDATE
000227,000199: # 72 ABORT
000228,000200: # 73 ILLEGAL VERB
000229,000201: # 74 ILLEGAL VERB
000230,000202: # 75 MANUAL I/O FOR FLIGHTS
000231,000203: # 76 DO RVT UPDATE
000232,000204: # 77 DO L/O TIME UPDATE
000233,000205:
|
|
Page 6
|
000235,000207:
000236,000208: # NORMAL NOUNS SCALE AND DECIMAL POINT
000237,000209: # 00 NOT IN USE
000238,000210: # 01 SPECIFY MACHINE ADDRESS (FRACTIONAL) (.XXXXX)
000239,000211: # 02 SPECIFY MACHINE ADDRESS (WHOLE) (XXXXX.)
000240,000212: # 03 SPECIFY MACHINE ADDRESS (DEGREES) (XXX.XXDEGREES)
000241,000213: # 04 SPECIFY MACHINE ADDRESS (HOURS) (XXX.XXHOURS)
000242,000214: # 05 SPECIFY MACHINE ADDRESS (SECONDS) (XXX.XXSECONDS)
000243,000215: # 06 SPECIFY MACHINE ADDRESS (GYRO DEGREES) (XX.XXXDEGREES)
000244,000216: # 07 SPECIFY MACHINE ADDRESS (Y OPT DEGREES) (XXX.XXDEG OR XX.XXXDEG)
000245,000217: # 10 SPARE
000246,000218: # 11 SPARE
000247,000219: # 12 SPARE
000248,000220: # 13 SPARE
000249,000221: # 14 SPARE
000250,000222: # 15 INCREMENT MACHINE ADDRESS (OCTAL ONLY)
000251,000223: # 16 TIME SECONDS (XXX.XXSECONDS)
000252,000224: # 17 TIME HOURS (XXX.XXHOURS)
000253,000225: # 20 ICDU (XXX.XXDEGREES)
000254,000226: # 21 PIPAS (XXXXX.PULSES)
000255,000227: # 22 NEW ANGLES I (XXX.XXDEGREES)
000256,000228: # 23 DELTA ANGLES I (XXX.XXDEGREES)
000257,000229: # 24 DELTA TIME (SECONDS) (XXX.XXSECONDS)
000258,000230: # 25 CHECKLIST (XXXXX.)
000259,000231: # 26 PRIO/DELAY (XXXXX.)
000260,000232: # 27 SELF TEST ON/OFF SWITCH (XXXXX.)
000261,000233: # 30 STAR NUMBERS (XXXXX.)
000262,000234: # 31 FAILREG, SFAIL, ERCOUNT (OCTAL ONLY)
000263,000235: # 32 DECISION TIME (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS = WEEKS))
000264,000236: # 33 EPHEMERIS TIME (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS = WEEKS))
000265,000237: # 34 MEASURED QUANTITY (MIDCOURSE) (XXXX.XKILOMETERS)
000266,000238: # 35 ROLL, PITCH, YAW (XXX.XXDEGREES)
000267,000239: # 36 LANDMARK DATA 1 (OCTAL ONLY)
000268,000240: # 37 LANDMARK DATA 2 (OCTAL ONLY)
000269,000241: # 40 VG FOR 501 (XXXX.X METERS/SEC)
000270,000242: # 41 SPARE
000271,000243: # 42 SPARE
000272,000244: # 43 SPARE
000273,000245: # 44 SPARE
000274,000246: # 45 SPARE
000275,000247: # 46 SPARE
000276,000248: # 47 SPARE
000277,000249: # 50 SPARE
000278,000250: # 51 SPARE
000279,000251: # 52 GYRO BIAS DRIFT (.BBXXXXXMILLIRAD/SEC)
000280,000252: # 53 GYRO INPUT AXIS ACCELERATION DRIFT (.BBXXXXX(MILLIRAD/SEC)/(CM/SEC SEC))
000281,000253: # 54 GYRO SPIN AXIS ACCELERATION DRIFT (.BBXXXXX(MILLIRAD/SEC)/(CM/SEC SEC))
000282,000254: # END OF NORMAL NOUNS
000283,000255:
|
|
Page 7
|
000285,000257:
000286,000258: # MIXED NOUNS SCALE AND DECIMAL POINT
000287,000259: # 55 OCDU (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG)
000288,000260: # 56 UNCALLED MARK DATA (OCDU & TIME(SECONDS)) (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG, XXX.XXSEC)
000289,000261: # 57 NEW ANGLES OCDU (XXX.XXDEG, XXX.XXDEG OR XX.XXXDEG)
000290,000262: # 60 IMU MODE STATUS (IN3, WASKSET, OLDERR) (OCTAL ONLY)
000291,000263: # 61 TARGET AZIMUTH AND ELEVATION (XXX.XXDEG, XX.XXXDEG)
000292,000264: # 62 RE-ENTRY VARIABLES (XXX.XXSEC, XXXXX., XXXXX.)
000293,000265: # 63 OCDUX AND TIME (XXX.XXDEG, XXX.XXSEC)
000294,000266: # 64 OCDUY AND TIME (XXX.XXDEG OR XX.XXXDEG, XXX.XXSEC)
000295,000267: # 65 SAMPLED TIME (HOURS AND SECONDS) (XXX.XXHOURS, XXX.XXSEC)
000296,000268: # (FETCHED IN INTERRUPT)
000297,000269: # 66 SYSTEM TEST RESULTS (XXXXX., .XXXXX, XXXXX.)
000298,000270: # 67 DELTA GYRO ANGLES (XX.XXXDEG FOR EACH)
000299,000271: # 70 PIPA BIAS (X.XXXXCM/SEC SEC FOR EACH)
000300,000272: # 71 PIPA SCALE FACTOR ERROR (XXXXX.PARTS/MILLION FOR EACH)
000301,000273: # 72 DELTA POSITION (XXXX.XKILOMETERS FOR EACH)
000302,000274: # 73 DELTA VELOCITY (XXXX.XMETERS/SEC FOR EACH)
000303,000275: # 74 MEASUREMENT DATA (MIDCOURSE) (XXX.XXHOURS (INTERNAL UNITS=WEEKS), XXXX.XKILOMETERS, XXXXX.
000304,000276: # 75 MEASUREMENT DEVIATIONS (MIDCOURSE) (XXXX.XKILOMETERS, XXXX,XMETERS/SEC, XXXX.XKILOMETERS)
000305,000277: # 76 POSITION VECTOR (XXXX.XKILOMETERS FOR EACH)
000306,000278: # 77 VELOCITY VECTOR (XXXX.XMETERS/SEC FOR EACH)
000307,000279:
|
|
Page 8
|
000309,000281:
000310,000282: # MAJOR MODES FOR FLIGHT 501
000311,000283:
000312,000284:
000313,000285:
000314,000286: # 00 IDLING
000315,000287:
000316,000288:
000317,000289:
000318,000290: # 0X PRELAUNCH
000319,000291:
000320,000292: # 01 INITIALIZATION
000321,000293: # 02 GYROCOMPASSING
000322,000294: # 03 OPTICAL VERIFICATION
000323,000295: # 04 INERTIAL REFERENCE
000324,000296: # 05 VERTICAL ERECT. (COUNTING)
000325,000297: # 06 VERTICAL ERECT. (UNCONDITIONAL)
000326,000298:
000327,000299: # 07 SYSTEM TEST
000328,000300:
000329,000301:
000330,000302:
000331,000303: # 1X BOOSTER MONITOR
000332,000304:
000333,000305: # 11 FIRST STAGE BOOSTER MONITORING
000334,000306:
000335,000307: # 14 SIV-B BOOSTER MONITOR WITH TUMBLE MON. ON
000336,000308:
000337,000309:
000338,000310:
000339,000311: # 2X COASTING PHASE
000340,000312:
000341,000313: # 21 MANEUVER TO COLDSOAK ATTITUDE
000342,000314: # 22 HOLD ATTITUDE DURING ORBITAL INTEGRATION
000343,000315: # 23 HOLD ATTITUDE
000344,000316: # 24 HOLD ATTITUDE WITH STATE VECTOR UPDATE ALLOWED.
000345,000317:
000346,000318: # 26 HOLD SPS2 ATTITUDE AND WAIT FOR TFF = TFFMIN
000347,000319: # 27 R, V, T UPDATING
000348,000320:
000349,000321:
000350,000322:
000351,000323: # 3X PRE-THRUSTING PHASES
000352,000324:
000353,000325: # 31 PRE-SPS1
000354,000326: # 32 PRE-SPS2
000355,000327:
000356,000328:
000357,000329:
000358,000330: # 4X THRUSTING PHASES
000359,000331:
|
|
Page 9
|
000361,000333: # 41 SPS1
000362,000334: # 42 SPS2
000363,000335:
000364,000336:
000365,000337:
000366,000338: # 5X ALIGNMENT
000367,000339:
000368,000340:
000369,000341:
000370,000342: # 6X ENTRY
000371,000343:
000372,000344: # 61 CM/SM SEPARATION MANEUVER
000373,000345: # 62 PRE-ENTRY MANEUVER
000374,000346: # 63 INITIATE ENTRY STEERING
000375,000347: # 64 .05 G INDICATION
000376,000348: # 65 UP-CONTROL PHASE
000377,000349: # 66 BALLISTIC PHASE
000378,000350: # 67 FINAL PHASE
000379,000351:
000380,000352:
000381,000353:
000382,000354: # 7X ABORT PHASES
000383,000355:
000384,000356: # 71 POST-TUMBLE ATTITUDE RECOVERY
000385,000357: # 72 FREE-FALL ENTRY ABORT
000386,000358: # 73 ABORT BURN
000387,000359: # 74 TUMBLE ARREST BURN
000388,000360:
000389,000361: # 77 G+N FLUSHED
000390,000362:
|
|
Page 10
|
000392,000364:
000393,000365: # JOB PRIORITIES FOR 501
000394,000366:
000395,000367: # PRIO37 = DOALARM
000396,000368: # PRIO36 = NWJOB
000397,000369: # PRIO35 = BIASONLY
000398,000370: # = 1/GYRO
000399,000371: # = ENEMA
000400,000372: # = MODE32
000401,000373: # = MODE26
000402,000374: # PRIO33 = POSTBY3
000403,000375: # = CHARIN
000404,000376: # PRIO32 = MKVB50
000405,000377: # = MKVB51
000406,000378: # = REMKVB51
000407,000379: # PRIO31 = SPITGYRO
000408,000380: # = MONDO
000409,000381: # = FREDSPDO
000410,000382: # PRIO27 = SPITGYRO
000411,000383: # = ENEMA
000412,000384: # = S4BSMSEP
000413,000385: # PRIO25 = ABORTEST
000414,000386: # = REDO4.21
000415,000387: # = BEGIN501
000416,000388: # PRIO24 = LIFTOFF
000417,000389: # PRIO23 = MANUJOB
000418,000390: # PRIO22 = TUMBJOB1
000419,000391: # = TUMBJOB
000420,000392: # PRIO21 = CGJOB
000421,000393: # PRIO20 = TOP1
000422,000394: # = TSELECT
000423,000395: # = PRAWAKE
000424,000396: # = STARTPL2
000425,000397: # = GYRDRFT2
000426,000398: # = CDUXJOB
000427,000399: # PRIO16 = SERVICER
000428,000400: # = ENTRYTOP
000429,000401: # PRIO15 = SMOOTHER
000430,000402: # PRIO14 = CHKOPT
000431,000403: # = UPTHETA1
000432,000404: # PRIO13 = SOAKJOB
000433,000405: # PRIO12 = TARGJOB
000434,000406: # = SOAKINIT
000435,000407: # = ATTIJOB
000436,000408: # = ATTIJOB1 -1
000437,000409: # = ATTIJOB2
000438,000410: # = SEPMANU
000439,000411: # = ENTAJOB
000440,000412: # PRIO10 = ROLLJOB
000441,000413: # PRIO7 = MODE23
000442,000414: # = MODE44
|
|
Page 11
|
000444,000416: # PRIO6 = UPJOB
000445,000417: # PRIO5 = MONITJOB
000446,000418: # = MARKDISP
000447,000419: # PRIO2 = FXFXCHK
End of include-file ASSEMBLY_AND_OPERATION_INFORMATION.agc. Parent file is MAIN.agc