Notations on the program listing read, in part:
GAP: ASSEMBLE REVISION 56 OF AGC PROGRAM ZERLINA BY ZOROASTER 9:12 OCT. 21,1970Note that the date is the date of the printout, not the date of the program revision.
Source Code
|
|
These source-code files were transcribed from a printout in Don Eyles's personal
collection, scanned by archive.org, and financially sponsored by Linden Sims.
A team of volunteers performed the transcription and proof-reading. The scanned
page images are available at
the Virtual AGC Project website, as well as higher-quality (but much larger)
images at
the Virtual AGC Project's collection in the Internet Archive. Report any problems by creating
"issues" at
the Virtual AGC Project's GitHub Repository. Notations on the program listing read, in part: GAP: ASSEMBLE REVISION 56 OF AGC PROGRAM ZERLINA BY ZOROASTER 9:12 OCT. 21,1970Note that the date is the date of the printout, not the date of the program revision. |
056168,000002: ## Copyright: Public domain.
056169,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
056170,000004: ## Purpose: A log section of Zerlina 56, the final revision of
056171,000005: ## Don Eyles's offline development program for the variable
056172,000006: ## guidance period servicer. It also includes a new P66 with LPD
056173,000007: ## (Landing Point Designator) capability, based on an idea of John
056174,000008: ## Young's. Neither of these advanced features were actually flown,
056175,000009: ## but Zerlina was also the birthplace of other big improvements to
056176,000010: ## Luminary including the terrain model and new (Luminary 1E)
056177,000011: ## analog display programs. Zerlina was branched off of Luminary 145,
056178,000012: ## and revision 56 includes all changes up to and including Luminary
056179,000013: ## 183. It is therefore quite close to the Apollo 14 program,
056180,000014: ## Luminary 178, where not modified with new features.
056181,000015: ## Reference: pp. 1283-1291
056182,000016: ## Assembler: yaYUL
056183,000017: ## Contact: Ron Burkey <info@sandroid.org>.
056184,000018: ## Website: www.ibiblio.org/apollo/index.html
056185,000019: ## Mod history: 2017-07-28 MAS Created from Luminary 210.
056186,000020: ## 2017-08-20 MAS Updated for Zerlina 56.
056187,000021:
|
|
Page 1283 |
056189,000023: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
056190,000024:
056191,000025: 43,3723 COUNT* $$/PHASE
056192,000026: 5322 BLOCK 02
056193,000027: 4000 SETLOC FFTAG1
056194,000028: 4000 BANK
056195,000029:
056196,000030: 5322 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
056197,000031: 5323 30000 CAF 0
056198,000032: 5324 24002 INCR Q
056199,000033:
056200,000034: 5325 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
056201,000035: 5326 35331 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
056202,000036: 5327 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
056203,000037: 5330 14640 TCF BANKJUMP # PUTS Q INTO A
056204,000038: 5331 20213 CADR SETUPDSP
056205,000039:
056206,000040: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
056207,000041:
056208,000042: 5332 50002 CHECKMM INDEX Q
056209,000043: 5333 40000 CS 0
056210,000044: 5334 61010 AD MODREG
056211,000045: 5335 00006 EXTEND
056212,000046: 5336 16753 BZF Q+2
056213,000047: 5337 16751 TCF Q+1 # NO MATCH
056214,000048:
056215,000049: 5340 6754 TCQ = Q+2 +1
056216,000050:
056217,000051: 14,3775 BANK 14
056218,000052: 10,2000 SETLOC PHASETAB
056219,000053: 10,2000 BANK
056220,000054:
056221,000055: 10,2213 COUNT* $$/PHASE
056222,000056: 10,2213 00004 SETUPDSP INHINT
056223,000057: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
056224,000058: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
056225,000059: 10,2216 05072 TC NOVAC # NEWMODE X
056226,000060: 10,2217 1010 EBANK= MODREG
056227,000061: 10,2217 03574 60102 2CADR DSPMMJOB
056228,000062:
056229,000063: 10,2221 52071 DXCH RUPTREG1
056230,000064: 10,2222 00003 RELINT
056231,000065: 10,2223 52006 DXCH Z # RETURN
056232,000066:
056233,000067: 10,2224 40,3574 DSPMMJOB EQUALS DSPMMJB
056234,000068:
056235,000069:
056236,000070: 5340 BLOCK 02
056237,000071: 4000 SETLOC FFTAG1
056238,000072: 4000 BANK
|
|
Page 1284 |
056240,000074: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
056241,000075: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
056242,000076:
056243,000077: # TC PHASCHNG
056244,000078: # OCT XXXXX
056245,000079:
056246,000080: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATIONTHAT IS STORED PERMANENTLY. THESE
056247,000081: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
056248,000082:
056249,000083: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
056250,000084: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
056251,000085: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
056252,000086: # LONGCALL TO BE RESTARTED.
056253,000087: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
056254,000088:
056255,000089: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
056256,000090:
056257,000091: # TL0 00P PPP PPP GGG ,
056258,000092:
056259,000093: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
056260,000094: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
056261,000095: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
056262,000096: # IT IS SET TO 0. SOME EXAMPLES,
056263,000097:
056264,000098: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TOBE SET TO 0,
056265,000099: # OCT 00003 MAKING GROUP 3 INACTIVE
056266,000100:
056267,000101: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
056268,000102: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
056269,000103:
056270,000104: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
056271,000105: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
056272,000106: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
056273,000107: # LOCATION
056274,000108: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
056275,000109: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
056276,000110: # LONGBASE WAS SET THIS SINGLE ENTRY
056277,000111: # SHOULD BE A LONGCALL)
056278,000112: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
056279,000113: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
056280,000114: # LONGCALL TO BE RESTARTED
056281,000115:
056282,000116: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
056283,000117: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
056284,000118:
056285,000119: # TL0 1AD XXX CJW GGG
056286,000120:
056287,000121: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
056288,000122: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
056289,000123: # THESE THREE BIT S MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1285 |
056291,000125: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
056292,000126: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
056293,000127: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
056294,000128: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
056295,000129: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
056296,000130: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
056297,000131: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
056298,000132: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
056299,000133:
056300,000134: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
056301,000135: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITHA PRIORITY
056302,000136: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
056303,000137: # AD+3 ALSO GO TO AD+3
056304,000138:
056305,000139: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
056306,000140: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
056307,000141: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
056308,000142: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
056309,000143: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
056310,000144: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
056311,000145: # LOCATION AD+5
056312,000146:
056313,000147: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
056314,000148: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
056315,000149:
056316,000150:
056317,000151: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
056318,000152: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
056319,000153: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
056320,000154:
056321,000155: # TL1 DAP PPP PPP GGG
056322,000156:
056323,000157: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
056324,000158: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
056325,000159: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
056326,000160: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN , OR 0 IF IT IS TO BE
056327,000161: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
056328,000162:
056329,000163: # AD TC PHASCHNG TBASE IS SET AND ARESTART CAUSE GROUP 3
056330,000164: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
056331,000165: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT(WE CAN
056332,000166: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
056333,000167: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
056334,000168: # AD+5 GO TO AD+5
056335,000169:
056336,000170: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
056337,000171: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
056338,000172: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
056339,000173: # BY MEANS OF GROUP 5
056340,000174:
|
|
Page 1286 |
056342,000176: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
056343,000177:
056344,000178:
056345,000179: # SUMMARY OF BITS
056346,000180:
056347,000181: # TYPE A TL0 00P PPP PPP GGG
056348,000182:
056349,000183: # TYPE B TL1 DAP PPP PPP GGG
056350,000184:
056351,000185: # TYPE C TL0 1AD XXX CJW GGG
056352,000186:
|
|
Page 1287 |
056354,000188: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
056355,000189: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
056356,000190: # CALLS ARE MADE IN THE FOLLOWING MANNER,
056357,000191:
056358,000192: # TC 2PHSCHNG
056359,000193: # OCT XXXXX
056360,000194: # OCT YYYYY
056361,000195:
056362,000196: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
056363,000197: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
056364,000198: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
056365,000199:
056366,000200: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
056367,000201: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
056368,000202: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
056369,000203: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
056370,000204: # AD+4 FOR GROUP 5 PHASE INFORMATION
056371,000205:
056372,000206: 5340 COUNT* $$/PHASE
056373,000207: 5340 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
056374,000208: 5341 50002 NDX Q
056375,000209: 5342 30000 CA 0
056376,000210: 5343 24002 INCR Q
056377,000211: 5344 54072 TS TEMPP2
056378,000212:
056379,000213: 5345 74757 MASK OCT7
056380,000214: 5346 60000 DOUBLE
056381,000215: 5347 54071 TS TEMPG2
056382,000216:
056383,000217: 5350 30072 CA TEMPP2
056384,000218: 5351 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
056385,000219: 5352 00006 EXTEND
056386,000220: 5353 74740 MP BIT12
056387,000221: 5354 56072 XCH TEMPP2
056388,000222:
056389,000223: 5355 74735 MASK BIT15
056390,000224: 5356 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
056391,000225:
056392,000226: 5357 50002 INDEX Q
056393,000227: 5360 30000 CA 0
056394,000228: 5361 24002 INCR Q
056395,000229: 5362 54065 TS TEMPSW
056396,000230:
056397,000231: 5363 15374 TCF PHASJUMP
056398,000232:
056399,000233: 5364 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
056400,000234: 5365 50002 INDEX Q
056401,000235: 5366 30000 CA 0
056402,000236: 5367 24002 INCR Q
056403,000237: 5370 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1288 |
056405,000239: 5371 54065 TS TEMPSW
056406,000240: 5372 34753 CA ONE
056407,000241: 5373 54066 TS TEMPSW2
056408,000242: 5374 00006 PHASJUMP EXTEND
056409,000243: 5375 35400 DCA ADRPCHN2 # OFF TO SWITCHED BANK
056410,000244: 5376 52006 DTCB
056411,000245:
056412,000246: 5377 E3,1400 EBANK= LST1
056413,000247: 5377 02224 20103 ADRPCHN2 2CADR PHSCHNG2
056414,000248:
056415,000249:
056416,000250:
056417,000251: 5401 22073 ONEORTWO LXCH TEMPBBCN
056418,000252: 5402 22006 LXCH BBANK
056419,000253: 5403 22073 LXCH TEMPBBCN
056420,000254:
056421,000255: 5404 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
056422,000256: 5405 10000 CCS A
056423,000257: 5406 17762 TCF CHECKB # IT IS OF TYPE :B:
056424,000258:
056425,000259: 5407 30062 CA TEMPP
056426,000260: 5410 74745 MASK BIT7
056427,000261: 5411 10000 CCS A # SHALL WE USE THE OLD PRIORITY
056428,000262: 5412 15434 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
056429,000263:
056430,000264: 5413 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
056431,000265: 5414 31051 CA PHSPRDT1 -2
056432,000266: 5415 54070 TS TEMPPR
056433,000267:
056434,000268: 5416 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
056435,000269: 5417 74744 MASK BIT8
056436,000270: 5420 10000 CCS A
056437,000271: 5421 15440 TCF GETNEWNM
056438,000272:
056439,000273: 5422 30002 CA Q
056440,000274: 5423 54063 TS TEMPNM
056441,000275: 5424 30006 CA BB
056442,000276: 5425 00006 EXTEND # PICK UP USERS SUPERBANK
056443,000277: 5426 04007 ROR SUPERBNK
056444,000278: 5427 54064 TS TEMPBB
056445,000279:
056446,000280: 5430 35433 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
056447,000281: 5431 22073 LXCH TEMPBBCN
056448,000282: 5432 52006 DTCB
056449,000283:
056450,000284: 5433 02312 CON2ADR GENADR CON2
056451,000285:
056452,000286: 5434 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
056453,000287: 5435 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
056454,000288: 5436 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1289 |
056456,000290: 5437 15415 TCF CON1 -1
056457,000291:
056458,000292: 5440 00006 GETNEWNM EXTEND
056459,000293: 5441 50002 INDEX Q
056460,000294: 5442 30001 DCA 0
056461,000295: 5443 52064 DXCH TEMPNM
056462,000296: 5444 34752 CA TWO
056463,000297: 5445 26002 ADS Q # OBTAIN RETURN ADDRESS
056464,000298:
056465,000299: 5446 15430 TCF TOCON2
056466,000300:
056467,000301: 5447 5024 OCT14000 EQUALS PRIO14
056468,000302: 5447 0061 TEMPG EQUALS ITEMP1
056469,000303: 5447 0062 TEMPP EQUALS ITEMP2
056470,000304: 5447 0063 TEMPNM EQUALS ITEMP3
056471,000305: 5447 0064 TEMPBB EQUALS ITEMP4
056472,000306: 5447 0065 TEMPSW EQUALS ITEMP5
056473,000307: 5447 0066 TEMPSW2 EQUALS ITEMP6
056474,000308: 5447 0070 TEMPPR EQUALS RUPTREG1
056475,000309: 5447 0071 TEMPG2 EQUALS RUPTREG2
056476,000310: 5447 0072 TEMPP2 EQUALS RUPTREG3
056477,000311:
056478,000312: 5447 0073 TEMPBBCN EQUALS RUPTREG4
056479,000313: 5447 0000006 BB EQUALS BBANK
056480,000314:
056481,000315:
056482,000316: 14,3775 BANK 14
056483,000317: 10,2000 SETLOC PHASETAB
056484,000318: 10,2000 BANK
056485,000319:
056486,000320: 10,2224 E3,1436 EBANK= PHSNAME1
056487,000321: 10,2224 COUNT* $$/PHASE
056488,000322: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
056489,000323: 10,2225 30065 CA TEMPSW
056490,000324: 10,2226 74757 MASK OCT7
056491,000325: 10,2227 60000 DOUBLE
056492,000326: 10,2230 54061 TS TEMPG
056493,000327:
056494,000328: 10,2231 30065 CA TEMPSW
056495,000329: 10,2232 75030 MASK OCT17770
056496,000330: 10,2233 00006 EXTEND
056497,000331: 10,2234 74740 MP BIT12
056498,000332: 10,2235 54062 TS TEMPP
056499,000333:
056500,000334: 10,2236 30065 CA TEMPSW
056501,000335: 10,2237 74101 MASK OCT60000
056502,000336: 10,2240 56065 XCH TEMPSW
056503,000337: 10,2241 75024 MASK OCT14000
056504,000338: 10,2242 10000 CCS A
|
|
Page 1290 |
056506,000340: 10,2243 15401 TCF ONEORTWO
056507,000341:
056508,000342: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
056509,000343: 10,2245 50061 NDX TEMPG
056510,000344: 10,2246 54750 TS PHASE1 -2
056511,000345:
056512,000346: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
056513,000347: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
056514,000348:
056515,000349: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
056516,000350: 10,2252 40072 CS TEMPP2
056517,000351: 10,2253 22072 LXCH TEMPP2
056518,000352: 10,2254 50071 NDX TEMPG2
056519,000353: 10,2255 52750 DXCH -PHASE1 -2
056520,000354:
056521,000355: 10,2256 10066 CCS TEMPSW2
056522,000356: 10,2257 12260 NOOP # CAN:T GET HERE
056523,000357: 10,2260 12264 TCF BELOW2
056524,000358:
056525,000359: 10,2261 40025 CS TIME1
056526,000360: 10,2262 50071 NDX TEMPG2
056527,000361: 10,2263 55050 TS TBASE1 -2
056528,000362:
056529,000363: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
056530,000364: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
056531,000365: 10,2266 12303 TCF BELOW4 # SET NEITHER
056532,000366:
056533,000367: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
056534,000368: 10,2270 50061 NDX TEMPG
056535,000369: 10,2271 55050 TS TBASE1 -2
056536,000370:
056537,000371: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
056538,000372: 10,2273 62276 AD BIT14COM
056539,000373: 10,2274 10000 CCS A
056540,000374: 10,2275 12276 NOOP # ***** CANT GET HERE *****
056541,000375: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
056542,000376: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
056543,000377:
056544,000378: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
056545,000379: 10,2301 30025 DCA TIME2
056546,000380: 10,2302 53151 DXCH LONGBASE
056547,000381:
056548,000382: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
056549,000383: 10,2304 50061 NDX TEMPG
056550,000384: 10,2305 54747 TS -PHASE1 -2
056551,000385:
056552,000386: 10,2306 30002 CA Q
056553,000387: 10,2307 22073 LXCH TEMPBBCN
056554,000388: 10,2310 00003 RELINT
056555,000389: 10,2311 52006 DTCB
|
|
Page 1291 |
056557,000391: 10,2312 22073 CON2 LXCH TEMPBBCN
056558,000392:
056559,000393: 10,2313 30062 CA TEMPP
056560,000394: 10,2314 50061 NDX TEMPG
056561,000395: 10,2315 54750 TS PHASE1 -2
056562,000396:
056563,000397: 10,2316 30070 CA TEMPPR
056564,000398: 10,2317 50061 NDX TEMPG
056565,000399: 10,2320 55051 TS PHSPRDT1 -2
056566,000400:
056567,000401: 10,2321 00006 EXTEND
056568,000402: 10,2322 30064 DCA TEMPNM
056569,000403: 10,2323 50061 NDX TEMPG
056570,000404: 10,2324 53435 DXCH PHSNAME1 -2
056571,000405:
056572,000406: 10,2325 12247 TCF BELOW1
056573,000407:
056574,000408: 7762 BLOCK 03
056575,000409: 6000 SETLOC FFTAG6
056576,000410: 6000 BANK
056577,000411:
056578,000412: 7762 COUNT* $$/PHASE
056579,000413: 7762 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
056580,000414: 7763 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
056581,000415: 7764 15434 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
056582,000416:
056583,000417: 7765 15413 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc