Source Code
|
These source-code files are part of a reconstructed copy of LM131 revision 1,
the final release of the Apollo 13 Lunar Module (LM) Apollo Guidance Computer
(AGC) software.
The source reconstruction began with source code of Luminary 131 previously
transcribed from a digitized copy of that program. A dump of the flight spare
core rope memory module B5, part number 2010802-171, serial number RAY 411,
was obtained. This module is the only module different between Luminary 131
and LM131 revision 1. The dump was disassembled and all changes were incorporated
into these source files. Note that page numbers in the reconstructed code match
those on the Luminary 131 printout, although the changed code would likely have
changed page numbers for a real LM131 revision 1 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
054117,000002: ## Copyright: Public domain.
054118,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054119,000004: ## Purpose: A section of LM131 revision 1.
054120,000005: ## It is part of the reconstructed source code for the final
054121,000006: ## release of the flight software for the Lunar Module's (LM)
054122,000007: ## Apollo Guidance Computer (AGC) for Apollo 13. The code has
054123,000008: ## been reconstructed from a listing of Luminary 131 and a dump
054124,000009: ## of a core rope memory module B5, part number 2010802-171,
054125,000010: ## which is the only module different between LM131 revision 1
054126,000011: ## and Luminary 131. The executable generated from this source
054127,000012: ## has been verified against the module dump, so while the names,
054128,000013: ## comments, and ordering may not be exactly correct, the
054129,000014: ## resulting binary is.
054130,000015: ## Reference: pp. 1286-1294
054131,000016: ## Assembler: yaYUL
054132,000017: ## Contact: Ron Burkey <info@sandroid.org>.
054133,000018: ## Website: www.ibiblio.org/apollo/index.html
054134,000019: ## Mod history: 2022-10-28 MAS Created from Luminary 131.
054135,000020:
|
|
Page 1286
|
054137,000022: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054138,000023:
054139,000024: 43,3751 COUNT* $$/PHASE
054140,000025: 5311 BLOCK 02
054141,000026: 4000 SETLOC FFTAG1
054142,000027: 4000 BANK
054143,000028:
054144,000029: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054145,000030: 5312 30000 CAF 0
054146,000031: 5313 24002 INCR Q
054147,000032:
054148,000033: 5314 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054149,000034: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054150,000035: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054151,000036: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054152,000037: 5320 20213 CADR SETUPDSP
054153,000038:
054154,000039: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054155,000040:
054156,000041: 5321 50002 CHECKMM INDEX Q
054157,000042: 5322 40000 CS 0
054158,000043: 5323 61010 AD MODREG
054159,000044: 5324 00006 EXTEND
054160,000045: 5325 16744 BZF Q+2
054161,000046: 5326 16742 TCF Q+1 # NO MATCH
054162,000047:
054163,000048: 5327 6745 TCQ = Q+2 +1
054164,000049:
054165,000050: 14,3775 BANK 14
054166,000051: 10,2000 SETLOC PHASETAB
054167,000052: 10,2000 BANK
054168,000053:
054169,000054: 10,2213 COUNT* $$/PHASE
054170,000055: 10,2213 00004 SETUPDSP INHINT
054171,000056: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054172,000057: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054173,000058: 10,2216 05072 TC NOVAC # NEWMODE X
054174,000059: 10,2217 1010 EBANK= MODREG
054175,000060: 10,2217 03577 60102 2CADR DSPMMJOB
054176,000061:
054177,000062: 10,2221 52071 DXCH RUPTREG1
054178,000063: 10,2222 00003 RELINT
054179,000064: 10,2223 52006 DXCH Z # RETURN
054180,000065:
054181,000066: 10,2224 40,3577 DSPMMJOB EQUALS DSPMMJB
054182,000067:
054183,000068: 5327 BLOCK 02
054184,000069: 4000 SETLOC FFTAG1
054185,000070: 4000 BANK
|
|
Page 1287
|
054187,000072: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054188,000073: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054189,000074: # TC PHASCHNG
054190,000075: # OCT XXXXX
054191,000076: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054192,000077: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054193,000078: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054194,000079: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054195,000080: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054196,000081: # LONGCALL TO BE RESTARTED.
054197,000082: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054198,000083:
054199,000084: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054200,000085: # TL0 00P PPP PPP GGG ,
054201,000086: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054202,000087: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054203,000088: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054204,000089: # IT IS SET TO 0. SOME EXAMPLES,
054205,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054206,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
054207,000092:
054208,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054209,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054210,000095:
054211,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054212,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054213,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054214,000099: # LOCATION
054215,000100:
054216,000101: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054217,000102: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054218,000103: # LONGBASE WAS SET THIS SINGLE ENTRY
054219,000104: # SHOULD BE A LONGCALL)
054220,000105:
054221,000106: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054222,000107: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054223,000108: # LONGCALL TO BE RESTARTED
054224,000109:
054225,000110: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054226,000111: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054227,000112: # TL0 1AD XXX CJW GGG
054228,000113: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054229,000114: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054230,000115: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1288
|
054232,000117: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054233,000118: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054234,000119: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054235,000120: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054236,000121: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054237,000122: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054238,000123: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054239,000124: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054240,000125: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054241,000126: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054242,000127: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054243,000128: # AD+3 ALSO GO TO AD+3
054244,000129:
054245,000130: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054246,000131: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054247,000132: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054248,000133: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054249,000134: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054250,000135: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054251,000136: # LOCATION AD+5
054252,000137:
054253,000138: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054254,000139: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054255,000140:
054256,000141: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054257,000142: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054258,000143: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054259,000144: # TL1 DAP PPP PPP GGG
054260,000145: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054261,000146: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054262,000147: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054263,000148: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054264,000149: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054265,000150: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054266,000151: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054267,000152: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054268,000153: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054269,000154: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054270,000155: # AD+5 GO TO AD+5
054271,000156:
054272,000157: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054273,000158: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054274,000159: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054275,000160: # BY MEANS OF GROUP 5
|
|
Page 1289
|
054277,000162: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054278,000163:
054279,000164: # SUMMARY OF BITS
054280,000165: # TYPE A TL0 00P PPP PPP GGG
054281,000166: # TYPE B TL1 DAP PPP PPP GGG
054282,000167: # TYPE C TL0 1AD XXX CJW GGG
054283,000168:
|
|
Page 1290
|
054285,000170: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054286,000171: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054287,000172: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054288,000173: # TC 2PHSCHNG
054289,000174: # OCT XXXXX
054290,000175: # OCT YYYYY
054291,000176: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054292,000177: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054293,000178: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054294,000179: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054295,000180: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054296,000181: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054297,000182: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054298,000183: # AD+4 FOR GROUP 5 PHASE INFORMATION
054299,000184:
054300,000185: 5327 COUNT* $$/PHASE
054301,000186: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054302,000187: 5330 50002 NDX Q
054303,000188: 5331 30000 CA 0
054304,000189: 5332 24002 INCR Q
054305,000190: 5333 54072 TS TEMPP2
054306,000191:
054307,000192: 5334 74757 MASK OCT7
054308,000193: 5335 60000 DOUBLE
054309,000194: 5336 54071 TS TEMPG2
054310,000195:
054311,000196: 5337 30072 CA TEMPP2
054312,000197: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054313,000198: 5341 00006 EXTEND
054314,000199: 5342 74740 MP BIT12
054315,000200: 5343 56072 XCH TEMPP2
054316,000201:
054317,000202: 5344 74735 MASK BIT15
054318,000203: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054319,000204:
054320,000205: 5346 50002 INDEX Q
054321,000206: 5347 30000 CA 0
054322,000207: 5350 24002 INCR Q
054323,000208: 5351 54065 TS TEMPSW
054324,000209:
054325,000210: 5352 15363 TCF PHASJUMP
054326,000211:
054327,000212: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054328,000213: 5354 50002 INDEX Q
054329,000214: 5355 30000 CA 0
054330,000215: 5356 24002 INCR Q
054331,000216: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1291
|
054333,000218: 5360 54065 TS TEMPSW
054334,000219: 5361 34753 CA ONE
054335,000220: 5362 54066 TS TEMPSW2
054336,000221: 5363 00006 PHASJUMP EXTEND
054337,000222: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054338,000223: 5365 52006 DTCB
054339,000224:
054340,000225: 5366 E3,1400 EBANK= LST1
054341,000226: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054342,000227:
054343,000228: 5370 22073 ONEORTWO LXCH TEMPBBCN
054344,000229: 5371 22006 LXCH BBANK
054345,000230: 5372 22073 LXCH TEMPBBCN
054346,000231:
054347,000232: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054348,000233: 5374 10000 CCS A
054349,000234: 5375 17753 TCF CHECKB # IT IS OF TYPE :B:
054350,000235:
054351,000236: 5376 30062 CA TEMPP
054352,000237: 5377 74745 MASK BIT7
054353,000238: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054354,000239: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054355,000240:
054356,000241: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054357,000242: 5403 31051 CA PHSPRDT1 -2
054358,000243: 5404 54070 TS TEMPPR
054359,000244:
054360,000245: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054361,000246: 5406 74744 MASK BIT8
054362,000247: 5407 10000 CCS A
054363,000248: 5410 15427 TCF GETNEWNM
054364,000249:
054365,000250: 5411 30002 CA Q
054366,000251: 5412 54063 TS TEMPNM
054367,000252: 5413 30006 CA BB
054368,000253: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054369,000254: 5415 04007 ROR SUPERBNK
054370,000255: 5416 54064 TS TEMPBB
054371,000256:
054372,000257: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054373,000258: 5420 22073 LXCH TEMPBBCN
054374,000259: 5421 52006 DTCB
054375,000260:
054376,000261: 5422 02312 CON2ADR GENADR CON2
054377,000262:
054378,000263: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054379,000264: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054380,000265: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1292
|
054382,000267: 5426 15404 TCF CON1 -1
054383,000268:
054384,000269: 5427 00006 GETNEWNM EXTEND
054385,000270: 5430 50002 INDEX Q
054386,000271: 5431 30001 DCA 0
054387,000272: 5432 52064 DXCH TEMPNM
054388,000273: 5433 34752 CA TWO
054389,000274: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054390,000275:
054391,000276: 5435 15417 TCF TOCON2
054392,000277:
054393,000278: 5436 5024 OCT14000 EQUALS PRIO14
054394,000279: 5436 0061 TEMPG EQUALS ITEMP1
054395,000280: 5436 0062 TEMPP EQUALS ITEMP2
054396,000281: 5436 0063 TEMPNM EQUALS ITEMP3
054397,000282: 5436 0064 TEMPBB EQUALS ITEMP4
054398,000283: 5436 0065 TEMPSW EQUALS ITEMP5
054399,000284: 5436 0066 TEMPSW2 EQUALS ITEMP6
054400,000285: 5436 0070 TEMPPR EQUALS RUPTREG1
054401,000286: 5436 0071 TEMPG2 EQUALS RUPTREG2
054402,000287: 5436 0072 TEMPP2 EQUALS RUPTREG3
054403,000288:
054404,000289: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054405,000290: 5436 0000006 BB EQUALS BBANK
054406,000291:
054407,000292: 14,3775 BANK 14
054408,000293: 10,2000 SETLOC PHASETAB
054409,000294: 10,2000 BANK
054410,000295:
054411,000296: 10,2224 E3,1436 EBANK= PHSNAME1
054412,000297: 10,2224 COUNT* $$/PHASE
054413,000298: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054414,000299: 10,2225 30065 CA TEMPSW
054415,000300: 10,2226 74757 MASK OCT7
054416,000301: 10,2227 60000 DOUBLE
054417,000302: 10,2230 54061 TS TEMPG
054418,000303:
054419,000304: 10,2231 30065 CA TEMPSW
054420,000305: 10,2232 75030 MASK OCT17770
054421,000306: 10,2233 00006 EXTEND
054422,000307: 10,2234 74740 MP BIT12
054423,000308: 10,2235 54062 TS TEMPP
054424,000309:
054425,000310: 10,2236 30065 CA TEMPSW
054426,000311: 10,2237 74101 MASK OCT60000
054427,000312: 10,2240 56065 XCH TEMPSW
054428,000313: 10,2241 75024 MASK OCT14000
054429,000314: 10,2242 10000 CCS A
|
|
Page 1293
|
054431,000316: 10,2243 15370 TCF ONEORTWO
054432,000317:
054433,000318: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054434,000319: 10,2245 50061 NDX TEMPG
054435,000320: 10,2246 54750 TS PHASE1 -2
054436,000321:
054437,000322: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054438,000323: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054439,000324:
054440,000325: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054441,000326: 10,2252 40072 CS TEMPP2
054442,000327: 10,2253 22072 LXCH TEMPP2
054443,000328: 10,2254 50071 NDX TEMPG2
054444,000329: 10,2255 52750 DXCH -PHASE1 -2
054445,000330:
054446,000331: 10,2256 10066 CCS TEMPSW2
054447,000332: 10,2257 12260 NOOP # CAN:T GET HERE
054448,000333: 10,2260 12264 TCF BELOW2
054449,000334:
054450,000335: 10,2261 40025 CS TIME1
054451,000336: 10,2262 50071 NDX TEMPG2
054452,000337: 10,2263 55050 TS TBASE1 -2
054453,000338:
054454,000339: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054455,000340: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054456,000341: 10,2266 12303 TCF BELOW4 # SET NEITHER
054457,000342:
054458,000343: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054459,000344: 10,2270 50061 NDX TEMPG
054460,000345: 10,2271 55050 TS TBASE1 -2
054461,000346:
054462,000347: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054463,000348: 10,2273 62276 AD BIT14COM
054464,000349: 10,2274 10000 CCS A
054465,000350: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054466,000351: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054467,000352: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054468,000353:
054469,000354: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054470,000355: 10,2301 30025 DCA TIME2
054471,000356: 10,2302 53151 DXCH LONGBASE
054472,000357:
054473,000358: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054474,000359: 10,2304 50061 NDX TEMPG
054475,000360: 10,2305 54747 TS -PHASE1 -2
054476,000361:
054477,000362: 10,2306 30002 CA Q
054478,000363: 10,2307 22073 LXCH TEMPBBCN
054479,000364: 10,2310 00003 RELINT
054480,000365: 10,2311 52006 DTCB
|
|
Page 1294
|
054482,000367: 10,2312 22073 CON2 LXCH TEMPBBCN
054483,000368:
054484,000369: 10,2313 30062 CA TEMPP
054485,000370: 10,2314 50061 NDX TEMPG
054486,000371: 10,2315 54750 TS PHASE1 -2
054487,000372:
054488,000373: 10,2316 30070 CA TEMPPR
054489,000374: 10,2317 50061 NDX TEMPG
054490,000375: 10,2320 55051 TS PHSPRDT1 -2
054491,000376:
054492,000377: 10,2321 00006 EXTEND
054493,000378: 10,2322 30064 DCA TEMPNM
054494,000379: 10,2323 50061 NDX TEMPG
054495,000380: 10,2324 53435 DXCH PHSNAME1 -2
054496,000381:
054497,000382: 10,2325 12247 TCF BELOW1
054498,000383:
054499,000384: 7753 BLOCK 03
054500,000385: 6000 SETLOC FFTAG6
054501,000386: 6000 BANK
054502,000387:
054503,000388: 7753 COUNT* $$/PHASE
054504,000389: 7753 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054505,000390: 7754 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054506,000391: 7755 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054507,000392:
054508,000393: 7756 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054509,000394:
054510,000395:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc