GAP: ASSEMBLE REVISION 069 OF AGC PROGRAM LUMINARY BY NASA 2021112-011 19:02 NOV. 25,1968Note that the date is the date of the printout, not the date of the program revision.
Source Code
|
|
These source-code files were transcribed from scans made from Don Eyles's personal
copy of Luminary 069. They were scanned at archive.org's Boston
facility, and the scanning was sponsored by Onno Hommes. The code was transcribed
from these scans by a team of volunteers who are referenced in the program
comments. Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". In some cases, where
similar code blocks exist in previously-transcribed AGC programs (primarily
Luminary 99, from Apollo 11) those code blocks were used as a starting point and
then corrected to agree with the Luminary 69 scans. The full scans are available
at the Virtual AGC
project's collection at archive.org, while more-convenient reduced-size (but reduced-quality)
images are available at
the main Virtual AGC website. Report any errors noted by creating an
issue report at the Virtual AGC
project's GitHub repository. Notations on the program listing read, in part:GAP: ASSEMBLE REVISION 069 OF AGC PROGRAM LUMINARY BY NASA 2021112-011 19:02 NOV. 25,1968Note that the date is the date of the printout, not the date of the program revision. |
055860,000002: ## Copyright: Public domain.
055861,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
055862,000004: ## Purpose: The main source file for Luminary revision 069.
055863,000005: ## It is part of the source code for the original release
055864,000006: ## of the flight software for the Lunar Module's (LM) Apollo
055865,000007: ## Guidance Computer (AGC) for Apollo 10. The actual flown
055866,000008: ## version was Luminary 69 revision 2, which included a
055867,000009: ## newer lunar gravity model and only affected module 2.
055868,000010: ## This file is intended to be a faithful transcription, except
055869,000011: ## that the code format has been changed to conform to the
055870,000012: ## requirements of the yaYUL assembler rather than the
055871,000013: ## original YUL assembler.
055872,000014: ## Reference: pp. 1288-1296
055873,000015: ## Assembler: yaYUL
055874,000016: ## Contact: Ron Burkey <info@sandroid.org>.
055875,000017: ## Website: www.ibiblio.org/apollo/index.html
055876,000018: ## Mod history: 2016-12-13 MAS Created from Luminary 99.
055877,000019: ## 2016-12-18 MAS Updated from comment-proofed Luminary 99 version.
055878,000020: ## 2017-01-11 RRB Updated for Luminary 69.
055879,000021: ## 2017-01-28 RSB Proofed comment text using octopus/prooferComments
055880,000022: ## and fixed errors found.
055881,000023: ## 2017-03-14 RSB Comment-text fixes noted in proofing Luminary 116.
055882,000024: ## 2017-03-16 RSB Comment-text fixes identified in 5-way
055883,000025: ## side-by-side diff of Luminary 69/99/116/131/210.
055884,000026: ## 2017-06-17 MAS Globally removed all SBANK= workarounds.
055885,000027:
|
|
Page 1288 |
055887,000029: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
055888,000030:
055889,000031: 43,3732 COUNT* $$/PHASE
055890,000032: 5311 BLOCK 02
055891,000033: 4000 SETLOC FFTAG1
055892,000034: 4000 BANK
055893,000035:
055894,000036: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
055895,000037: 5312 30000 CAF 0
055896,000038: 5313 24002 INCR Q
055897,000039:
055898,000040: 5314 55011 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
055899,000041: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
055900,000042: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
055901,000043: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
055902,000044: 5320 20071 CADR SETUPDSP
055903,000045:
055904,000046: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
055905,000047:
055906,000048: 5321 50002 CHECKMM INDEX Q
055907,000049: 5322 40000 CS 0
055908,000050: 5323 61011 AD MODREG
055909,000051: 5324 00006 EXTEND
055910,000052: 5325 16740 BZF Q+2
055911,000053: 5326 16736 TCF Q+1 # NO MATCH
055912,000054:
055913,000055: 5327 6741 TCQ = Q+2 +1
055914,000056:
055915,000057: 14,3711 BANK 14
055916,000058: 10,2000 SETLOC PHASETAB
055917,000059: 10,2000 BANK
055918,000060:
055919,000061: 10,2071 COUNT* $$/PHASE
055920,000062: 10,2071 00004 SETUPDSP INHINT
055921,000063: 10,2072 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
055922,000064: 10,2073 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
055923,000065: 10,2074 05072 TC NOVAC # NEWMODE X
055924,000066: 10,2075 1011 EBANK= MODREG
055925,000067: 10,2075 03532 60102 2CADR DSPMMJOB
055926,000068:
055927,000069: 10,2077 52071 DXCH RUPTREG1
055928,000070: 10,2100 00003 RELINT
055929,000071: 10,2101 52006 DXCH Z # RETURN
055930,000072:
055931,000073: 10,2102 40,3532 DSPMMJOB EQUALS DSPMMJB
055932,000074:
055933,000075: 5327 BLOCK 02
055934,000076: 4000 SETLOC FFTAG1
055935,000077: 4000 BANK
055936,000078:
|
|
Page 1289 |
055938,000080: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
055939,000081: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
055940,000082: # TC PHASCHNG
055941,000083: # OCT XXXXX
055942,000084: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
055943,000085: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
055944,000086: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
055945,000087: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
055946,000088: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
055947,000089: # LONGCALL TO BE RESTARTED.
055948,000090: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
055949,000091:
055950,000092: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
055951,000093: # TL0 00P PPP PPP GGG ,
055952,000094: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
055953,000095: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
055954,000096: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
055955,000097: # IT IS SET TO 0. SOME EXAMPLES,
055956,000098: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
055957,000099: # OCT 00003 MAKING GROUP 3 INACTIVE
055958,000100:
055959,000101: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
055960,000102: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
055961,000103:
055962,000104: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
055963,000105: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
055964,000106: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
055965,000107: # LOCATION
055966,000108: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
055967,000109: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
055968,000110: # LONGBASE WAS SET THIS SINGLE ENTRY
055969,000111: # SHOULD BE A LONGCALL)
055970,000112:
055971,000113: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
055972,000114: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
055973,000115: # LONGCALL TO BE RESTARTED
055974,000116:
055975,000117: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
055976,000118: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
055977,000119: # TL0 1AD XXX CJW GGG
055978,000120: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
055979,000121: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
055980,000122: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1290 |
055982,000124: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
055983,000125: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
055984,000126: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
055985,000127: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
055986,000128: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
055987,000129: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
055988,000130: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
055989,000131: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
055990,000132: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
055991,000133: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
055992,000134: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
055993,000135: # AD+3 ALSO GO TO AD+3
055994,000136:
055995,000137: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
055996,000138: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
055997,000139: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
055998,000140: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
055999,000141: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
056000,000142: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
056001,000143: # LOCATION AD+5
056002,000144:
056003,000145: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
056004,000146: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
056005,000147:
056006,000148: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
056007,000149: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
056008,000150: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
056009,000151: # TL1 DAP PPP PPP GGG
056010,000152: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
056011,000153: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
056012,000154: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
056013,000155: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
056014,000156: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
056015,000157: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
056016,000158: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
056017,000159: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
056018,000160: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
056019,000161: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
056020,000162: # AD+5 GO TO AD+5
056021,000163:
056022,000164: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
056023,000165: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
056024,000166: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
056025,000167: # BY MEANS OF GROUP 5
|
|
Page 1291 |
056027,000169: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
056028,000170:
056029,000171: # SUMMARY OF BITS
056030,000172: # TYPE A TL0 00P PPP PPP GGG
056031,000173: # TYPE B TL1 DAP PPP PPP GGG
056032,000174: # TYPE C TL0 1AD XXX CJW GGG
056033,000175:
|
|
Page 1292 |
056035,000177: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
056036,000178: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
056037,000179: # CALLS ARE MADE IN THE FOLLOWING MANNER,
056038,000180: # TC 2PHSCHNG
056039,000181: # OCT XXXXX
056040,000182: # OCT YYYYY
056041,000183: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPEC. THERE IS ONE
056042,000184: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
056043,000185: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
056044,000186: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
056045,000187: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
056046,000188: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
056047,000189: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
056048,000190: # AD+4 FOR GROUP 5 PHASE INFORMATION
056049,000191:
056050,000192: 5327 COUNT* $$/PHASE
056051,000193: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
056052,000194: 5330 50002 NDX Q
056053,000195: 5331 30000 CA 0
056054,000196: 5332 24002 INCR Q
056055,000197: 5333 54072 TS TEMPP2
056056,000198:
056057,000199: 5334 74757 MASK OCT7
056058,000200: 5335 60000 DOUBLE
056059,000201: 5336 54071 TS TEMPG2
056060,000202:
056061,000203: 5337 30072 CA TEMPP2
056062,000204: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
056063,000205: 5341 00006 EXTEND
056064,000206: 5342 74740 MP BIT12
056065,000207: 5343 56072 XCH TEMPP2
056066,000208:
056067,000209: 5344 74735 MASK BIT15
056068,000210: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
056069,000211:
056070,000212: 5346 50002 INDEX Q
056071,000213: 5347 30000 CA 0
056072,000214: 5350 24002 INCR Q
056073,000215: 5351 54065 TS TEMPSW
056074,000216:
056075,000217: 5352 15363 TCF PHASJUMP
056076,000218:
056077,000219: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
056078,000220: 5354 50002 INDEX Q
056079,000221: 5355 30000 CA 0
056080,000222: 5356 24002 INCR Q
056081,000223: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1293 |
056083,000225: 5360 54065 TS TEMPSW
056084,000226: 5361 34753 CA ONE
056085,000227: 5362 54066 TS TEMPSW2
056086,000228: 5363 00006 PHASJUMP EXTEND
056087,000229: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
056088,000230: 5365 52006 DTCB
056089,000231:
056090,000232: 5366 E3,1400 EBANK= LST1
056091,000233: 5366 02102 20103 ADRPCHN2 2CADR PHSCHNG2
056092,000234:
056093,000235: 5370 22073 ONEORTWO LXCH TEMPBBCN
056094,000236: 5371 22006 LXCH BBANK
056095,000237: 5372 22073 LXCH TEMPBBCN
056096,000238:
056097,000239: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
056098,000240: 5374 10000 CCS A
056099,000241: 5375 17747 TCF CHECKB # IT IS OF TYPE :B:
056100,000242:
056101,000243: 5376 30062 CA TEMPP
056102,000244: 5377 74745 MASK BIT7
056103,000245: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
056104,000246: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
056105,000247:
056106,000248: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
056107,000249: 5403 31052 CA PHSPRDT1 -2
056108,000250: 5404 54070 TS TEMPPR
056109,000251:
056110,000252: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
056111,000253: 5406 74744 MASK BIT8
056112,000254: 5407 10000 CCS A
056113,000255: 5410 15427 TCF GETNEWNM
056114,000256:
056115,000257: 5411 30002 CA Q
056116,000258: 5412 54063 TS TEMPNM
056117,000259: 5413 30006 CA BB
056118,000260: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
056119,000261: 5415 04007 ROR SUPERBNK
056120,000262: 5416 54064 TS TEMPBB
056121,000263:
056122,000264: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
056123,000265: 5420 22073 LXCH TEMPBBCN
056124,000266: 5421 52006 DTCB
056125,000267:
056126,000268: 5422 02170 CON2ADR GENADR CON2
056127,000269:
056128,000270: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
056129,000271: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
056130,000272: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1294 |
056132,000274: 5426 15404 TCF CON1 -1
056133,000275:
056134,000276: 5427 00006 GETNEWNM EXTEND
056135,000277: 5430 50002 INDEX Q
056136,000278: 5431 30001 DCA 0
056137,000279: 5432 52064 DXCH TEMPNM
056138,000280: 5433 34752 CA TWO
056139,000281: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
056140,000282:
056141,000283: 5435 15417 TCF TOCON2
056142,000284:
056143,000285: 5436 5024 OCT14000 EQUALS PRIO14
056144,000286: 5436 0061 TEMPG EQUALS ITEMP1
056145,000287: 5436 0062 TEMPP EQUALS ITEMP2
056146,000288: 5436 0063 TEMPNM EQUALS ITEMP3
056147,000289: 5436 0064 TEMPBB EQUALS ITEMP4
056148,000290: 5436 0065 TEMPSW EQUALS ITEMP5
056149,000291: 5436 0066 TEMPSW2 EQUALS ITEMP6
056150,000292: 5436 0070 TEMPPR EQUALS RUPTREG1
056151,000293: 5436 0071 TEMPG2 EQUALS RUPTREG2
056152,000294: 5436 0072 TEMPP2 EQUALS RUPTREG3
056153,000295:
056154,000296: 5436 0073 TEMPBBCN EQUALS RUPTREG4
056155,000297: 5436 0000006 BB EQUALS BBANK
056156,000298:
056157,000299: 14,3711 BANK 14
056158,000300: 10,2000 SETLOC PHASETAB
056159,000301: 10,2000 BANK
056160,000302:
056161,000303: 10,2102 E3,1436 EBANK= PHSNAME1
056162,000304: 10,2102 COUNT* $$/PHASE
056163,000305: 10,2102 22073 PHSCHNG2 LXCH TEMPBBCN
056164,000306: 10,2103 30065 CA TEMPSW
056165,000307: 10,2104 74757 MASK OCT7
056166,000308: 10,2105 60000 DOUBLE
056167,000309: 10,2106 54061 TS TEMPG
056168,000310:
056169,000311: 10,2107 30065 CA TEMPSW
056170,000312: 10,2110 75030 MASK OCT17770
056171,000313: 10,2111 00006 EXTEND
056172,000314: 10,2112 74740 MP BIT12
056173,000315: 10,2113 54062 TS TEMPP
056174,000316:
056175,000317: 10,2114 30065 CA TEMPSW
056176,000318: 10,2115 74101 MASK OCT60000
056177,000319: 10,2116 56065 XCH TEMPSW
056178,000320: 10,2117 75024 MASK OCT14000
056179,000321: 10,2120 10000 CCS A
|
|
Page 1295 |
056181,000323: 10,2121 15370 TCF ONEORTWO
056182,000324:
056183,000325: 10,2122 30062 CA TEMPP # START STORING THE PHASE INFORMATION
056184,000326: 10,2123 50061 NDX TEMPG
056185,000327: 10,2124 54751 TS PHASE1 -2
056186,000328:
056187,000329: 10,2125 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
056188,000330: 10,2126 12142 TCF BELOW2 # IT:S A PHASCHNG
056189,000331:
056190,000332: 10,2127 12130 TCF +1 # IT:S A 2PHSCHNG
056191,000333: 10,2130 40072 CS TEMPP2
056192,000334: 10,2131 22072 LXCH TEMPP2
056193,000335: 10,2132 50071 NDX TEMPG2
056194,000336: 10,2133 52751 DXCH -PHASE1 -2
056195,000337:
056196,000338: 10,2134 10066 CCS TEMPSW2
056197,000339: 10,2135 12136 NOOP # CAN:T GET HERE
056198,000340: 10,2136 12142 TCF BELOW2
056199,000341:
056200,000342: 10,2137 40025 CS TIME1
056201,000343: 10,2140 50071 NDX TEMPG2
056202,000344: 10,2141 55051 TS TBASE1 -2
056203,000345:
056204,000346: 10,2142 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
056205,000347: 10,2143 12156 TCF BELOW3 # SET LONGBASE ONLY
056206,000348: 10,2144 12161 TCF BELOW4 # SET NEITHER
056207,000349:
056208,000350: 10,2145 40025 CS TIME1 # SET TBASE TO BEGIN WITH
056209,000351: 10,2146 50061 NDX TEMPG
056210,000352: 10,2147 55051 TS TBASE1 -2
056211,000353:
056212,000354: 10,2150 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
056213,000355: 10,2151 62154 AD BIT14COM
056214,000356: 10,2152 10000 CCS A
056215,000357: 10,2153 12154 NOOP # ***** CANT GET HERE *****
056216,000358: 10,2154 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
056217,000359: 10,2155 12161 TCF BELOW4 # NO WE NEED ONLY SET TBASE
056218,000360:
056219,000361: 10,2156 00006 BELOW3 EXTEND # SET LONGBASE
056220,000362: 10,2157 30025 DCA TIME2
056221,000363: 10,2160 53152 DXCH LONGBASE
056222,000364:
056223,000365: 10,2161 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
056224,000366: 10,2162 50061 NDX TEMPG
056225,000367: 10,2163 54750 TS -PHASE1 -2
056226,000368:
056227,000369: 10,2164 30002 CA Q
056228,000370: 10,2165 22073 LXCH TEMPBBCN
056229,000371: 10,2166 00003 RELINT
056230,000372: 10,2167 52006 DTCB
|
|
Page 1296 |
056232,000374: 10,2170 22073 CON2 LXCH TEMPBBCN
056233,000375:
056234,000376: 10,2171 30062 CA TEMPP
056235,000377: 10,2172 50061 NDX TEMPG
056236,000378: 10,2173 54751 TS PHASE1 -2
056237,000379:
056238,000380: 10,2174 30070 CA TEMPPR
056239,000381: 10,2175 50061 NDX TEMPG
056240,000382: 10,2176 55052 TS PHSPRDT1 -2
056241,000383:
056242,000384: 10,2177 00006 EXTEND
056243,000385: 10,2200 30064 DCA TEMPNM
056244,000386: 10,2201 50061 NDX TEMPG
056245,000387: 10,2202 53435 DXCH PHSNAME1 -2
056246,000388:
056247,000389: 10,2203 12125 TCF BELOW1
056248,000390:
056249,000391: 7747 BLOCK 03
056250,000392: 6000 SETLOC FFTAG6
056251,000393: 6000 BANK
056252,000394:
056253,000395: 7747 COUNT* $$/PHASE
056254,000396: 7747 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
056255,000397: 7750 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
056256,000398: 7751 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
056257,000399:
056258,000400: 7752 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
056259,000401:
056260,000402:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc