GAP: ASSEMBLE REVISION 131 OF AGC PROGRAM LUMINARY BY NASA 2021112-091 17:53 DEC. 19, 1969Note that the date is the date the printout was made, not the date on which the program revision was released, although these happen to be very close together.
Source Code
|
|
This source code is very close to the Apollo Guidance Computer software for the
Apollo 13 Lunar module. This revision of the Luminary 131 program is from December
of 1969, whereas there was a later revision in January of 1970, and still another
revision in February, which is the code that flew on the mission.
As far as this transcription is concerned, it was originally from a copy made in 1991 of
a printout from the collection of AGC developer Don Eyles for collector David Craig.
It was subsequently scanned by Gary Neff, reprocessed for online
presentation at the now-discontinued History of Recent Science and Technology (HRST) website
of MIT's Dibner Institute (the full-quality scans being discarded in the process),
and finally transcribed by Ron Burkey for the Virtual AGC Project. Although a
high-quality replacement scan for a completely illegible page was later provided by Gary
Neff, the reduced legibility of the reprocessed HRST posting nevertheless caused many
errors to be introduced into the transcription. Accordingly, a second scan of the same physical
printout was made in 2017 for the Virtual AGC Project's collection at the Internet Archive,
and used to correct the transcription errors. All of the scanned materials mentioned,
as well as other Luminary 131 related material, are available online.
Don Eyles apprently made additional hand-written notes in printout between 1991 and 2017,
so the two scans are not identical in that respect. The page-headings in the printout read, in part:GAP: ASSEMBLE REVISION 131 OF AGC PROGRAM LUMINARY BY NASA 2021112-091 17:53 DEC. 19, 1969Note that the date is the date the printout was made, not the date on which the program revision was released, although these happen to be very close together. |
054257,000002: ## Copyright: Public domain.
054258,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
054259,000004: ## Purpose: A section of Luminary 1C, revision 131.
054260,000005: ## It is part of the source code for the Lunar Module's (LM)
054261,000006: ## Apollo Guidance Computer (AGC) for Apollo 13.
054262,000007: ## This file is intended to be a faithful transcription, except
054263,000008: ## that the code format has been changed to conform to the
054264,000009: ## requirements of the yaYUL assembler rather than the
054265,000010: ## original YUL assembler.
054266,000011: ## Reference: pp. 1286-1294
054267,000012: ## Contact: Ron Burkey <info@sandroid.org>.
054268,000013: ## Website: www.ibiblio.org/apollo
054269,000014: ## Mod history: 06/05/03 RSB. Began transcribing.
054270,000015: ## 2011-05-07 JL Removed workaround. Flagged SBANK= workaround
054271,000016: ## for future removal.
054272,000017: ## 2017-01-06 RSB Page numbers now agree with those on the
054273,000018: ## original hardcopy, as opposed to the PDF page
054274,000019: ## numbers in 1701.pdf.
054275,000020: ## 2017-01-28 RSB Back-ported some comment-text fixes from Luminary 69.
054276,000021: ## 2017-02-27 RSB Proofed comment text using octopus/ProoferComments.
054277,000022: ## 2017-03-01 RSB Fixed lingering comment-text typos.
054278,000023: ## 2017-03-14 RSB Comment-text fixes noted in proofing Luminary 116.
054279,000024: ## 2017-03-16 RSB Comment-text fixes identified in 5-way
054280,000025: ## side-by-side diff of Luminary 69/99/116/131/210.
054281,000026: ## 2017-06-17 MAS Globally removed all SBANK= workarounds.
054282,000027:
|
|
Page 1286 |
054284,000029: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
054285,000030:
054286,000031: 43,3751 COUNT* $$/PHASE
054287,000032: 5311 BLOCK 02
054288,000033: 4000 SETLOC FFTAG1
054289,000034: 4000 BANK
054290,000035:
054291,000036: 5311 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
054292,000037: 5312 30000 CAF 0
054293,000038: 5313 24002 INCR Q
054294,000039:
054295,000040: 5314 55010 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
054296,000041: 5315 35320 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
054297,000042: 5316 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
054298,000043: 5317 14640 TCF BANKJUMP # PUTS Q INTO A
054299,000044: 5320 20213 CADR SETUPDSP
054300,000045:
054301,000046: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
054302,000047:
054303,000048: 5321 50002 CHECKMM INDEX Q
054304,000049: 5322 40000 CS 0
054305,000050: 5323 61010 AD MODREG
054306,000051: 5324 00006 EXTEND
054307,000052: 5325 16744 BZF Q+2
054308,000053: 5326 16742 TCF Q+1 # NO MATCH
054309,000054:
054310,000055: 5327 6745 TCQ = Q+2 +1
054311,000056:
054312,000057: 14,3775 BANK 14
054313,000058: 10,2000 SETLOC PHASETAB
054314,000059: 10,2000 BANK
054315,000060:
054316,000061: 10,2213 COUNT* $$/PHASE
054317,000062: 10,2213 00004 SETUPDSP INHINT
054318,000063: 10,2214 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
054319,000064: 10,2215 34355 CAF PRIO30 # EITHER A TASK OR JOB CAN COME TO
054320,000065: 10,2216 05072 TC NOVAC # NEWMODE X
054321,000066: 10,2217 1010 EBANK= MODREG
054322,000067: 10,2217 03577 60102 2CADR DSPMMJOB
054323,000068:
054324,000069: 10,2221 52071 DXCH RUPTREG1
054325,000070: 10,2222 00003 RELINT
054326,000071: 10,2223 52006 DXCH Z # RETURN
054327,000072:
054328,000073: 10,2224 40,3577 DSPMMJOB EQUALS DSPMMJB
054329,000074:
054330,000075: 5327 BLOCK 02
054331,000076: 4000 SETLOC FFTAG1
054332,000077: 4000 BANK
|
|
Page 1287 |
054334,000079: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
054335,000080: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
054336,000081: # TC PHASCHNG
054337,000082: # OCT XXXXX
054338,000083: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
054339,000084: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
054340,000085: # G.0 INACTIVE, WILL NOT PERMIT A GROUP G RESTART
054341,000086: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
054342,000087: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
054343,000088: # LONGCALL TO BE RESTARTED.
054344,000089: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
054345,000090:
054346,000091: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
054347,000092: # TL0 00P PPP PPP GGG ,
054348,000093: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1-7, THE P:S FOR THE PHASE,
054349,000094: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
054350,000095: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
054351,000096: # IT IS SET TO 0. SOME EXAMPLES,
054352,000097: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
054353,000098: # OCT 00003 MAKING GROUP 3 INACTIVE
054354,000099:
054355,000100: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
054356,000101: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
054357,000102:
054358,000103: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
054359,000104: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
054360,000105: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
054361,000106: # LOCATION
054362,000107:
054363,000108: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
054364,000109: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
054365,000110: # LONGBASE WAS SET THIS SINGLE ENTRY
054366,000111: # SHOULD BE A LONGCALL)
054367,000112:
054368,000113: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
054369,000114: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
054370,000115: # LONGCALL TO BE RESTARTED
054371,000116:
054372,000117: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
054373,000118: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
054374,000119: # TL0 1AD XXX CJW GGG
054375,000120: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
054376,000121: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
054377,000122: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1288 |
054379,000124: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
054380,000125: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
054381,000126: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
054382,000127: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
054383,000128: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
054384,000129: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
054385,000130: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
054386,000131: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
054387,000132: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
054388,000133: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
054389,000134: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
054390,000135: # AD+3 ALSO GO TO AD+3
054391,000136:
054392,000137: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
054393,000138: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
054394,000139: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
054395,000140: # AD+3 2CADR CALLCALL A DELTA TIME STORED IN DELTIME. THE
054396,000141: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
054397,000142: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
054398,000143: # LOCATION AD+5
054399,000144:
054400,000145: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
054401,000146: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
054402,000147:
054403,000148: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
054404,000149: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
054405,000150: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
054406,000151: # TL1 DAP PPP PPP GGG
054407,000152: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
054408,000153: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
054409,000154: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
054410,000155: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
054411,000156: # THE NEXT LOCATION. (THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
054412,000157: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
054413,000158: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
054414,000159: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
054415,000160: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
054416,000161: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
054417,000162: # AD+5 GO TO AD+5
054418,000163:
054419,000164: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
054420,000165: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
054421,000166: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
054422,000167: # BY MEANS OF GROUP 5
|
|
Page 1289 |
054424,000169: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
054425,000170:
054426,000171: # SUMMARY OF BITS
054427,000172: # TYPE A TL0 00P PPP PPP GGG
054428,000173: # TYPE B TL1 DAP PPP PPP GGG
054429,000174: # TYPE C TL0 1AD XXX CJW GGG
054430,000175:
|
|
Page 1290 |
054432,000177: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
054433,000178: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
054434,000179: # CALLS ARE MADE IN THE FOLLOWING MANNER,
054435,000180: # TC 2PHSCHNG
054436,000181: # OCT XXXXX
054437,000182: # OCT YYYYY
054438,000183: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
054439,000184: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
054440,000185: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
054441,000186: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
054442,000187: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
054443,000188: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
054444,000189: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
054445,000190: # AD+4 FOR GROUP 5 PHASE INFORMATION
054446,000191:
054447,000192: 5327 COUNT* $$/PHASE
054448,000193: 5327 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
054449,000194: 5330 50002 NDX Q
054450,000195: 5331 30000 CA 0
054451,000196: 5332 24002 INCR Q
054452,000197: 5333 54072 TS TEMPP2
054453,000198:
054454,000199: 5334 74757 MASK OCT7
054455,000200: 5335 60000 DOUBLE
054456,000201: 5336 54071 TS TEMPG2
054457,000202:
054458,000203: 5337 30072 CA TEMPP2
054459,000204: 5340 75030 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
054460,000205: 5341 00006 EXTEND
054461,000206: 5342 74740 MP BIT12
054462,000207: 5343 56072 XCH TEMPP2
054463,000208:
054464,000209: 5344 74735 MASK BIT15
054465,000210: 5345 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
054466,000211:
054467,000212: 5346 50002 INDEX Q
054468,000213: 5347 30000 CA 0
054469,000214: 5350 24002 INCR Q
054470,000215: 5351 54065 TS TEMPSW
054471,000216:
054472,000217: 5352 15363 TCF PHASJUMP
054473,000218:
054474,000219: 5353 00004 PHASCHNG INHINT # NORMAL PHASCHNG ENTRY POINT.
054475,000220: 5354 50002 INDEX Q
054476,000221: 5355 30000 CA 0
054477,000222: 5356 24002 INCR Q
054478,000223: 5357 00004 PHSCHNGA INHINT # FIRST OCTAL PARAMETER IN A.
|
|
Page 1291 |
054480,000225: 5360 54065 TS TEMPSW
054481,000226: 5361 34753 CA ONE
054482,000227: 5362 54066 TS TEMPSW2
054483,000228: 5363 00006 PHASJUMP EXTEND
054484,000229: 5364 35367 DCA ADRPCHN2 # OFF TO SWITCHED BANK
054485,000230: 5365 52006 DTCB
054486,000231:
054487,000232: 5366 E3,1400 EBANK= LST1
054488,000233: 5366 02224 20103 ADRPCHN2 2CADR PHSCHNG2
054489,000234:
054490,000235: 5370 22073 ONEORTWO LXCH TEMPBBCN
054491,000236: 5371 22006 LXCH BBANK
054492,000237: 5372 22073 LXCH TEMPBBCN
054493,000238:
054494,000239: 5373 75024 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
054495,000240: 5374 10000 CCS A
054496,000241: 5375 17753 TCF CHECKB # IT IS OF TYPE :B:
054497,000242:
054498,000243: 5376 30062 CA TEMPP
054499,000244: 5377 74745 MASK BIT7
054500,000245: 5400 10000 CCS A # SHALL WE USE THE OLD PRIORITY
054501,000246: 5401 15423 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
054502,000247:
054503,000248: 5402 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
054504,000249: 5403 31051 CA PHSPRDT1 -2
054505,000250: 5404 54070 TS TEMPPR
054506,000251:
054507,000252: 5405 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
054508,000253: 5406 74744 MASK BIT8
054509,000254: 5407 10000 CCS A
054510,000255: 5410 15427 TCF GETNEWNM
054511,000256:
054512,000257: 5411 30002 CA Q
054513,000258: 5412 54063 TS TEMPNM
054514,000259: 5413 30006 CA BB
054515,000260: 5414 00006 EXTEND # PICK UP USERS SUPERBANK
054516,000261: 5415 04007 ROR SUPERBNK
054517,000262: 5416 54064 TS TEMPBB
054518,000263:
054519,000264: 5417 35422 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
054520,000265: 5420 22073 LXCH TEMPBBCN
054521,000266: 5421 52006 DTCB
054522,000267:
054523,000268: 5422 02312 CON2ADR GENADR CON2
054524,000269:
054525,000270: 5423 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
054526,000271: 5424 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
054527,000272: 5425 24002 INCR Q # OBTAIN RETURN ADDRESS
|
|
Page 1292 |
054529,000274: 5426 15404 TCF CON1 -1
054530,000275:
054531,000276: 5427 00006 GETNEWNM EXTEND
054532,000277: 5430 50002 INDEX Q
054533,000278: 5431 30001 DCA 0
054534,000279: 5432 52064 DXCH TEMPNM
054535,000280: 5433 34752 CA TWO
054536,000281: 5434 26002 ADS Q # OBTAIN RETURN ADDRESS
054537,000282:
054538,000283: 5435 15417 TCF TOCON2
054539,000284:
054540,000285: 5436 5024 OCT14000 EQUALS PRIO14
054541,000286: 5436 0061 TEMPG EQUALS ITEMP1
054542,000287: 5436 0062 TEMPP EQUALS ITEMP2
054543,000288: 5436 0063 TEMPNM EQUALS ITEMP3
054544,000289: 5436 0064 TEMPBB EQUALS ITEMP4
054545,000290: 5436 0065 TEMPSW EQUALS ITEMP5
054546,000291: 5436 0066 TEMPSW2 EQUALS ITEMP6
054547,000292: 5436 0070 TEMPPR EQUALS RUPTREG1
054548,000293: 5436 0071 TEMPG2 EQUALS RUPTREG2
054549,000294: 5436 0072 TEMPP2 EQUALS RUPTREG3
054550,000295:
054551,000296: 5436 0073 TEMPBBCN EQUALS RUPTREG4
054552,000297: 5436 0000006 BB EQUALS BBANK
054553,000298:
054554,000299: 14,3775 BANK 14
054555,000300: 10,2000 SETLOC PHASETAB
054556,000301: 10,2000 BANK
054557,000302:
054558,000303: 10,2224 E3,1436 EBANK= PHSNAME1
054559,000304: 10,2224 COUNT* $$/PHASE
054560,000305: 10,2224 22073 PHSCHNG2 LXCH TEMPBBCN
054561,000306: 10,2225 30065 CA TEMPSW
054562,000307: 10,2226 74757 MASK OCT7
054563,000308: 10,2227 60000 DOUBLE
054564,000309: 10,2230 54061 TS TEMPG
054565,000310:
054566,000311: 10,2231 30065 CA TEMPSW
054567,000312: 10,2232 75030 MASK OCT17770
054568,000313: 10,2233 00006 EXTEND
054569,000314: 10,2234 74740 MP BIT12
054570,000315: 10,2235 54062 TS TEMPP
054571,000316:
054572,000317: 10,2236 30065 CA TEMPSW
054573,000318: 10,2237 74101 MASK OCT60000
054574,000319: 10,2240 56065 XCH TEMPSW
054575,000320: 10,2241 75024 MASK OCT14000
054576,000321: 10,2242 10000 CCS A
|
|
Page 1293 |
054578,000323: 10,2243 15370 TCF ONEORTWO
054579,000324:
054580,000325: 10,2244 30062 CA TEMPP # START STORING THE PHASE INFORMATION
054581,000326: 10,2245 50061 NDX TEMPG
054582,000327: 10,2246 54750 TS PHASE1 -2
054583,000328:
054584,000329: 10,2247 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
054585,000330: 10,2250 12264 TCF BELOW2 # IT:S A PHASCHNG
054586,000331:
054587,000332: 10,2251 12252 TCF +1 # IT:S A 2PHSCHNG
054588,000333: 10,2252 40072 CS TEMPP2
054589,000334: 10,2253 22072 LXCH TEMPP2
054590,000335: 10,2254 50071 NDX TEMPG2
054591,000336: 10,2255 52750 DXCH -PHASE1 -2
054592,000337:
054593,000338: 10,2256 10066 CCS TEMPSW2
054594,000339: 10,2257 12260 NOOP # CAN:T GET HERE
054595,000340: 10,2260 12264 TCF BELOW2
054596,000341:
054597,000342: 10,2261 40025 CS TIME1
054598,000343: 10,2262 50071 NDX TEMPG2
054599,000344: 10,2263 55050 TS TBASE1 -2
054600,000345:
054601,000346: 10,2264 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
054602,000347: 10,2265 12300 TCF BELOW3 # SET LONGBASE ONLY
054603,000348: 10,2266 12303 TCF BELOW4 # SET NEITHER
054604,000349:
054605,000350: 10,2267 40025 CS TIME1 # SET TBASE TO BEGIN WITH
054606,000351: 10,2270 50061 NDX TEMPG
054607,000352: 10,2271 55050 TS TBASE1 -2
054608,000353:
054609,000354: 10,2272 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
054610,000355: 10,2273 62276 AD BIT14COM
054611,000356: 10,2274 10000 CCS A
054612,000357: 10,2275 12276 NOOP # ***** CANT GET HERE *****
054613,000358: 10,2276 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
054614,000359: 10,2277 12303 TCF BELOW4 # NO WE NEED ONLY SET TBASE
054615,000360:
054616,000361: 10,2300 00006 BELOW3 EXTEND # SET LONGBASE
054617,000362: 10,2301 30025 DCA TIME2
054618,000363: 10,2302 53151 DXCH LONGBASE
054619,000364:
054620,000365: 10,2303 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
054621,000366: 10,2304 50061 NDX TEMPG
054622,000367: 10,2305 54747 TS -PHASE1 -2
054623,000368:
054624,000369: 10,2306 30002 CA Q
054625,000370: 10,2307 22073 LXCH TEMPBBCN
054626,000371: 10,2310 00003 RELINT
054627,000372: 10,2311 52006 DTCB
|
|
Page 1294 |
054629,000374: 10,2312 22073 CON2 LXCH TEMPBBCN
054630,000375:
054631,000376: 10,2313 30062 CA TEMPP
054632,000377: 10,2314 50061 NDX TEMPG
054633,000378: 10,2315 54750 TS PHASE1 -2
054634,000379:
054635,000380: 10,2316 30070 CA TEMPPR
054636,000381: 10,2317 50061 NDX TEMPG
054637,000382: 10,2320 55051 TS PHSPRDT1 -2
054638,000383:
054639,000384: 10,2321 00006 EXTEND
054640,000385: 10,2322 30064 DCA TEMPNM
054641,000386: 10,2323 50061 NDX TEMPG
054642,000387: 10,2324 53435 DXCH PHSNAME1 -2
054643,000388:
054644,000389: 10,2325 12247 TCF BELOW1
054645,000390:
054646,000391: 7753 BLOCK 03
054647,000392: 6000 SETLOC FFTAG6
054648,000393: 6000 BANK
054649,000394:
054650,000395: 7753 COUNT* $$/PHASE
054651,000396: 7753 74740 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
054652,000397: 7754 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
054653,000398: 7755 15423 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
054654,000399:
054655,000400: 7756 15402 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
054656,000401:
054657,000402:
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc