Source Code
|
These source-code files are part of a reconstructed copy of Artemis 071, the
first release of the Apollo 15 through 17 Command Module (CM) Apollo Guidance
Computer (AGC) software.
The reconstruction began with source code of Artemis 072 previously transcribed
from a digitized copy of that program. The code was then updated by undoing
changes between the two versions. The reconstruction was verified by matching
memory-bank checksums to those listed in drawing 2021154-. Note that page
numbers in the reconstructed code match those on the Artemis 072 printout,
although the changed code would likely have changed page numbers for a real
Artemis 071 listing.
Comments from the original source code are prefixed with a single '#' symbol,
whereas comments added later are prefixed by "##" or "###". Report any errors
noted by creating an
issue report at the Virtual AGC
project's GitHub repository.
|
060043,000002: ## Copyright: Public domain.
060044,000003: ## Filename: PHASE_TABLE_MAINTENANCE.agc
060045,000004: ## Purpose: A section of Artemis revision 071.
060046,000005: ## It is part of the reconstructed source code for the first
060047,000006: ## release of the flight software for the Command Module's
060048,000007: ## (CM) Apollo Guidance Computer (AGC) for Apollo 15 through
060049,000008: ## 17. The code has been recreated from a copy of Artemis 072.
060050,000009: ## It has been adapted such that the resulting bugger words
060051,000010: ## exactly match those specified for Artemis 071 in NASA
060052,000011: ## drawing 2021154-, which gives relatively high confidence
060053,000012: ## that the reconstruction is correct.
060054,000013: ## Reference: 1402
060055,000014: ## Assembler: yaYUL
060056,000015: ## Contact: Ron Burkey <info@sandroid.org>.
060057,000016: ## Website: www.ibiblio.org/apollo/index.html
060058,000017: ## Mod history: 2019-08-14 MAS Created from Artemis 072.
060059,000018:
|
|
Page 1402
|
060061,000020:
060062,000021: # SUBROUTINE TO UPDATE THE PROGRAM NUMBER DISPLAY ON THE DSKY.
060063,000022:
060064,000023: 4000 SETLOC FFTAG1
060065,000024: 4000 BANK
060066,000025:
060067,000026: 5344 COUNT* $$/PHASE
060068,000027: 5344 50002 NEWMODEX INDEX Q # UPDATE MODREG. ENTRY FOR MODE IN FIXED.
060069,000028: 5345 30000 CAF 0
060070,000029: 5346 24002 INCR Q
060071,000030:
060072,000031: 5347 55214 NEWMODEA TS MODREG # ENTRY FOR MODE IN A.
060073,000032: 5350 35353 MMDSPLAY CAF +3 # DISPLAY MAJOR MODE.
060074,000033: 5351 22006 PREBJUMP LXCH BBANK # PUTS BBANK IN L
060075,000034: 5352 14660 TCF BANKJUMP # PUTS Q INTO A
060076,000035: 5353 20463 CADR SETUPDSP
060077,000036:
060078,000037: # RETURN TO CALLER +3 IF MODE = THAT AT CALLER +1. OTHERWISE RETURN TO CALLER +2.
060079,000038:
060080,000039: 5354 50002 CHECKMM INDEX Q
060081,000040: 5355 40000 CS 0
060082,000041: 5356 61214 AD MODREG
060083,000042: 5357 00006 EXTEND
060084,000043: 5360 16710 BZF Q+2
060085,000044: 5361 16706 TCF Q+1 # NO MATCH
060086,000045:
060087,000046: 10,2000 SETLOC PHASETAB
060088,000047: 10,2000 BANK
060089,000048:
060090,000049: 10,2463 COUNT* $$/PHASE
060091,000050: 10,2463 00004 SETUPDSP INHINT
060092,000051: 10,2464 52071 DXCH RUPTREG1 # SAVE CALLER-S RETURN 2CADR
060093,000052: 10,2465 05120 TC NOVAC30 # EITHER A TASK OR JOB CAN COMETO NEWMODEX
060094,000053: 10,2466 1214 EBANK= MODREG
060095,000054: 10,2466 03377 60102 2CADR DSPMMJOB
060096,000055:
060097,000056: 10,2470 52071 DXCH RUPTREG1
060098,000057: 10,2471 00003 RELINT
060099,000058: 10,2472 52006 DXCH Z # RETURN
060100,000059:
060101,000060: 10,2473 40,3377 DSPMMJOB EQUALS DSPMMJB
060102,000061:
060103,000062: 4000 SETLOC FFTAG1
060104,000063: 4000 BANK
|
|
Page 1403
|
060106,000065:
060107,000066: # PHASCHNG IS THE MAIN WAY OF MAKING PHASE CHANGES FOR RESTARTS. THERE ARE THREE FORMS OF PHASCHNG, KNOWN AS TYPE
060108,000067: # A, TYPE B, AND TYPE C. THEY ARE ALL CALLED AS FOLLOWS, WHERE OCT XXXXX CONTAINS THE PHASE INFORMATION,
060109,000068:
060110,000069: # TC PHASCHNG
060111,000070: # OCT XXXXX
060112,000071:
060113,000072: # TYPE A IS CONCERNED WITH FIXED PHASE CHANGES, THAT IS, PHASE INFORMATION THAT IS STORED PERMANENTLY. THESE
060114,000073: # OPTIONS ARE, WHERE G STANDS FOR A GROUP AND .X FOR THE PHASE,
060115,000074:
060116,000075: # G.0 INACTIVE, WILLNOT PERMIT A GROUP G RESTART
060117,000076: # G.1 WILL CAUSE THE LAST DISPLAY TO BE REACTIVATED, USED MAINLY IN MANNED FLIGHTS
060118,000077: # G.EVEN A DOUBLE TABLE RESTART, CAN CAUSE ANY COMBINATION OF TWO JOBS, TASKS, AND/OR
060119,000078: # LONGCALL TO BE RESTARTED.
060120,000079: # G.ODD NOT .1 A SINGLE TABLE RESTART, CAN CAUSE EITHER A JOB, TASK, OR LONGCALL RESTART
060121,000080:
060122,000081: # THIS INFORMATION IS PUT INTO THE OCTAL WORD AFTER TC PHASCHNG AS FOLLOWS
060123,000082:
060124,000083: # TL0 00P PPP PPP GGG ,
060125,000084:
060126,000085: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7, THE P:S FOR THE PHASE,
060127,000086: # OCTAL 0 - 127. 0:S MUST BE 0. IF ONE WISHES TO HAVE THE TBASE OF GROUP G TO BE SET AT THIS TIME,
060128,000087: # T IS SET TO 1, OTHERWISE IT IS SET TO 0. SIMIARLY IF ONE WISHES TO SET LONGBASE, THEN L IS SET TO 1, OTHERWISE
060129,000088: # IT IS SET TO 0. SOME EXAMPLES,
060130,000089:
060131,000090: # TC PHASCHNG THIS WILL CAUSE GROUP 3 TO BE SET TO 0,
060132,000091: # OCT 00003 MAKING GROUP 3 INACTIVE
060133,000092:
060134,000093: # TC PHASCHNG IF A RESTART OCCURS THIS WOULD CAUSE
060135,000094: # OCT 00012 GROUP 2 TO RESTART THE LAST DISPLAY
060136,000095:
060137,000096: # TC PHASCHNG THIS SETS THE TBASE OF GROUP 4 AND IN
060138,000097: # OCT 40064 CASE OF A RESTART WOULD START UP THE TWO
060139,000098: # THINGS LOCATED IN THE DOUBLE 4.6 RESTART
060140,000099: # LOCATION
060141,000100: # TC PHASCHNG THIS SETS LONGBASE AND UPON A RESTART
060142,000101: # OCT 20135 CAUSES 5.13 TO BE RESTARTED (SINCE
060143,000102: # LONGBASE WAS SET THIS SINGLE ENTRY
060144,000103: # SHOULD BE A LONGCALL)
060145,000104: # TC PHASCHNG SINCE BOTH TBASE4 AND LONGBASE ARE SET,
060146,000105: # OCT 60124 4.12 SHOULD CONTAIN BOTH A TASK AND A
060147,000106: # LONGCALL TO BE RESTARTED
060148,000107:
060149,000108: # TYPE C PHASCHNG CONTAINS THE VARIABLE TYPE OF PHASCHNG INFORMATION. INSTEAD OF THE INFORMATION BEING IN A
060150,000109: # PERMANENT FORM, ONE STORES THE DESIRED RESTART INFORMATION IN A VARIABKE LOCATION. THE BITS ARE AS FOLLOWS,
060151,000110:
060152,000111: # TL0 1AD XXX CJW GGG
060153,000112:
060154,000113: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. IF THE RESTART IS TO
060155,000114: # BE BY WAITLIST, W IS SET TO 1, IF IT IS A JOB, J IS SET TO 1, IF IT IS A LONGCALL, C IS SET TO 1. ONLY ONE OF
060156,000115: # THESE THREE BITS MAY BE SET. X:S ARE IGNORED 1 MUST BE 1, AND 0 MUST BE 0. AGAIN T STANDS FOR THE TBASE,
|
|
Page 1404
|
060158,000117: # AND L FOR LONGBASE. THE BITS A AND D ARE CONCERNED WITH THE VARIABLE INFORMATION. IF D IS SET TO 1, A PRIORITY
060159,000118: # OR DELTA TIME WILL BE READ FROM THE NEXT LOCATION AFTER THE OCTAL INFORMATION, IF THIS IS TO BE INDIRECT, THAT
060160,000119: # IS, THE NAME OF A LOCATION COMT+INING THE INFORMATION (DELTA TIME ONLY), THEN THIS IS GIVEN AS THE -GENADR OF
060161,000120: # THAT LOCATION WHICH CONTAINS THE DELTA TIME. IF THE OLD PRIORITY OR DELTA TIME IS TO BE USED, THAT WHICH IS
060162,000121: # ALREADY IN THE VARIABLE STORAGE, THEN D IS SET TO 0. NEXT THE A BIT IS USED. IF IT IS SET TO 0, THE ADDRESS
060163,000122: # THAT WOULD BE RESTARTED DURING A RESTART IS THE NEXT LOCATION AFTER THE PHASE INFORMATION, THAT IS, EITHER
060164,000123: # (TC PHASCHNG) +2 OR +3, DEPENDING ON WHETHER D HAD BEEN SET OR NOT. IF A IS SET TO 1, THEN THE ADDRESS THAT
060165,000124: # WOULD BE RESTARTED IS THE 2CADR THAT IS READ FROM THE NEXT TWO LOCATIONS. EXAMPLES,
060166,000125:
060167,000126: # AD TC PHASCHNG THIS WOULD CAUSE LOCATION AD +3 TO BE
060168,000127: # AD+1 OCT 05023 RESTARTED BY GROUP THREE WITH A PRIORITY
060169,000128: # AD+2 OCT 23000 OF 23. NOTE UPON RETURNING IT WOULD
060170,000129: # AD+3 ALSO GO TO AD+3
060171,000130:
060172,000131: # AD TC PHASCHNG GROUP 1 WOULD CAUSE CAUSE CALLCALL TO
060173,000132: # AD+1 OCT 27441 BE STARTED AS A LONGCALL FROM THE TIME
060174,000133: # AD+2 -GENADR DELTIME STORED IN LONGBASE (LONGBASE WAS SET) BY
060175,000134: # AD+3 2CADR CALLCALL A DELTATIME STORED IN DELTIME. THE
060176,000135: # AD+4 BBCON OF THE 2CADR SHOULD CONTAIN THE E
060177,000136: # AD+5 BANK OF DELTIME. PHASCHNG RETURNS TO
060178,000137: # LOCATION AD+5
060179,000138:
060180,000139: # NOTE THAT IF A VARIABLE PRIORITY IS GIVEN FOR A JOB, THE JOB WILL BE RESTARTED AS A NOVAC IF THE PRIORITY IS
060181,000140: # NEGATIVE, AS A FINDVAC IF THE PRIORITY IS POSITIVE.
060182,000141:
060183,000142: # TYPE B PHASCHNG IS A COMBINATION OF VARIABLE AND FIXED PHASE CHANGES. IT WILL START UP A JOB AS INDICATED
060184,000143: # BELOW AND ALSO START UP ONE FIXED RESTART, THAT IS EITHER AN G.1 OR A G.ODD OR THE FIRST ENTRY OF G.EVEN
060185,000144: # DOUBLE ENTRY. THE BIT INFORMATION IS AS FOLLOWS,
060186,000145:
060187,000146: # TL1 DAP PPP PPP GGG
060188,000147:
060189,000148: # WHERE EACH LETTER OR NUMBER STANDS FOR A BIT. THE G:S STAND FOR THE GROUP, OCTAL 1 - 7. THE P:S FOR THE FIXED
060190,000149: # PHASE INFORMATION, OCTAL 0 - 127. 1 MUST BE 1. AND AGAIN T STANDS FOR THE TBASE AND L FOR LONGBASE. D THIS
060191,000150: # TIME STANDS ONLY FOR PRIORITY SINCE THIS WILL BE CONSIDERED A JOB, AND IT MUST BE GIVEN DIRECTLY IF GIVEN.
060192,000151: # AGAIN A STANDS FOR THE ADDRESS OF THE LOCATION TO BE RESTARTED, 1 IF THE 2CADR IS GIVEN, OR 0 IF IT IS TO BE
060193,000152: # THE NEXT LOCATION.(THE RETURN LOCATION OF PHASCHNG) EXAMPLES,
060194,000153:
060195,000154: # AD TC PHASCHNG TBASE IS SET AND A RESTART CAUSE GROUP 3
060196,000155: # AD+1 OCT 56043 TO START THE JOB AJOBAJOB WITH PRIORITY
060197,000156: # AD+2 OCT 31000 31 AND THE FIRST ENTRY OF 3.4SPOT (WE CAN
060198,000157: # AD+3 2CADR AJOBAJOB ASSUME IT IS A TASK SINCE WE SET TBASE3)
060199,000158: # AD+4 UPON RETURN FROM PHASCHNG CONTROL WOULD
060200,000159: # AD+5 GO TO AD+5
060201,000160:
060202,000161: # AD TC PHASCHNG UPON A RESTART THE LAST DISPLAY WOULD BE
060203,000162: # AD+1 OCT 10015 RESTARTED AND A JOB WITH THE PREVIOUSLY
060204,000163: # AD+2 STORED PRIORITY WOULD BE BEGUN AT AD+2
060205,000164: # BY MEANS OF GROUP 5
060206,000165:
|
|
Page 1405
|
060208,000167:
060209,000168: # THE NOVAC-FINDVAC CHOICE FOR JOBS HOLDS HERE ALSO - NEGATIVE PRIORITY CAUSES A NOVAC CALL, POSITIVE A FINDVAC.
060210,000169:
060211,000170:
060212,000171: # SUMMARY OF BITS
060213,000172:
060214,000173: # TYPE A TL0 00P PPP PPP GGG
060215,000174:
060216,000175: # TYPE B TL1 DAP PPP PPP GGG
060217,000176:
060218,000177: # TYPE C TL0 1AD XXX CJW GGG
060219,000178:
060220,000179:
|
|
Page 1406
|
060222,000181:
060223,000182: # 2PHSCHNG IS USED WHEN ONE WISHES TO START UP A GROUP OR CHANGE A GROUP WHILE UNDER THE CONTROL OF A DIFFERENT
060224,000183: # GROUP. FOR EXAMPLE, CHANGE THE PHASE OF GROUP 3 WHILE THE PORTION OF THE PROGRAM IS UNDER GROUP 5. ALL 2PHSCHNG
060225,000184: # CALLS ARE MADE IN THE FOLLOWING MANNER,
060226,000185:
060227,000186: # TC 2PHSCHNG
060228,000187: # OCT XXXXX
060229,000188: # OCT YYYYY
060230,000189:
060231,000190: # WHERE OCT XXXXX MUST BE OF TYPE A AND OCT YYYYY MAY BE OF EITHER TYPE A OR TYPE B OR TYPE C. THERE IS ONE
060232,000191: # DIFFERENCE --- NOTE- IF LONGBASE IS TO BE SET THIS INFORMATION IS GIVEN IN THE OCT YYYYY INFORMATION, IT WILL
060233,000192: # BE DISREGARDED IF GIVEN WITH THE OCT XXXXX INFORMATION. A COUPLE OF EXAMPLES MAY HELP,
060234,000193:
060235,000194: # AD TC 2PHSCHNG SET TBASE3 AND IF A RESTART OCCURS START
060236,000195: # AD+1 OCT 40083 THE TWO ENTRIES IN 3.8 TABLE LOCATION
060237,000196: # AD+2 OCT 05025 THIS IS OF TYPE C, SET THE JOB TO BE
060238,000197: # AD+3 OCT 18000 TO BE LOCATION AD+4, WITH A PRIORITY 18,
060239,000198: # AD+4 FOR GROUP 5 PHASE INFORMATION
060240,000199:
060241,000200: 5362 COUNT* $$/PHASE
060242,000201: 5362 00004 2PHSCHNG INHINT # THE ENTRY FOR A DOUBLE PHASE CHANGE
060243,000202: 5363 50002 NDX Q
060244,000203: 5364 30000 CA 0
060245,000204: 5365 24002 INCR Q
060246,000205: 5366 54072 TS TEMPP2
060247,000206:
060248,000207: 5367 74774 MASK OCT7
060249,000208: 5370 60000 DOUBLE
060250,000209: 5371 54071 TS TEMPG2
060251,000210:
060252,000211: 5372 30072 CA TEMPP2
060253,000212: 5373 75056 MASK OCT17770 # NEED ONLY 1770, BUT WHY GET A NEW CONST.
060254,000213: 5374 00006 EXTEND
060255,000214: 5375 74755 MP BIT12
060256,000215: 5376 56072 XCH TEMPP2
060257,000216:
060258,000217: 5377 74752 MASK BIT15
060259,000218: 5400 54066 TS TEMPSW2 # INDICATES WHETHER TO SET TBASE OR NOT
060260,000219:
060261,000220: 5401 15405 TCF PHASCHNG +3
060262,000221:
060263,000222: 5402 00004 PHASCHNG INHINT
060264,000223: 5403 34770 CA ONE # INDICATESWE CAME FROM A PHASCHNG ENTRY
060265,000224: 5404 54066 TS TEMPSW2
060266,000225:
060267,000226: 5405 50002 +3 NDX Q
060268,000227: 5406 30000 CA 0
060269,000228: 5407 24002 INCR Q
060270,000229: 5410 54065 TS TEMPSW
|
|
Page 1407
|
060272,000231: 5411 00006 EXTEND
060273,000232: 5412 35415 DCA ADRPCHN2 # OFF TO SWITCHED BANK
060274,000233: 5413 52006 DTCB
060275,000234:
060276,000235: 5414 E3,1400 EBANK= LST1
060277,000236: 5414 02473 20063 ADRPCHN2 2CADR PHSCHNG2
060278,000237:
060279,000238:
060280,000239: 5416 22073 ONEORTWO LXCH TEMPBBCN
060281,000240: 5417 22006 LXCH BBANK
060282,000241: 5420 22073 LXCH TEMPBBCN
060283,000242:
060284,000243: 5421 75053 MASK OCT14000 # SEE WHAT KIND OF PHASE CHANGE IT IS
060285,000244: 5422 10000 CCS A
060286,000245: 5423 15464 TCF CHECKB # IT IS OF TYPE :B:
060287,000246:
060288,000247: 5424 30062 CA TEMPP
060289,000248: 5425 74762 MASK BIT7
060290,000249: 5426 10000 CCS A # SHALL WE USE THE OLD PRIORITY
060291,000250: 5427 15451 TCF GETPRIO # NO GET A NEW PRIORITY (OR DELTA T)
060292,000251:
060293,000252: 5430 50061 OLDPRIO NDX TEMPG # USE THE OLD PRIORITY (OR DELTA T)
060294,000253: 5431 31256 CA PHSPRDT1 -2
060295,000254: 5432 54070 -1 TS TEMPPR
060296,000255:
060297,000256: 5433 30062 CON1 CA TEMPP # SEE IF A 2CADR IS GIVEN
060298,000257: 5434 74761 MASK BIT8
060299,000258: 5435 10000 CCS A
060300,000259: 5436 15455 TCF GETNEWNM
060301,000260:
060302,000261: 5437 30002 CA Q
060303,000262: 5440 54063 TS TEMPNM
060304,000263: 5441 30006 CA BB
060305,000264: 5442 00006 EXTEND # PICK UP USERS SUPERBANK
060306,000265: 5443 04007 ROR SUPERBNK
060307,000266: 5444 54064 TS TEMPBB
060308,000267:
060309,000268: 5445 35450 TOCON2 CA CON2ADR # BACK TO SWITCHED BANK
060310,000269: 5446 22073 LXCH TEMPBBCN
060311,000270: 5447 52006 DTCB
060312,000271:
060313,000272: 5450 02561 CON2ADR GENADR CON2
060314,000273:
060315,000274: 5451 50002 GETPRIO NDX Q # DON:T CARE IF DIRECT OR INDIRECT
060316,000275: 5452 30000 CA 0 # LEAVE THAT DECISION TO RESTARTS
060317,000276: 5453 24002 INCR Q # OBTAIN RETURN ADDRESS
060318,000277: 5454 15432 TCF CON1 -1
060319,000278:
060320,000279: 5455 00006 GETNEWNM EXTEND
|
|
Page 1408
|
060322,000281: 5456 50002 INDEX Q
060323,000282: 5457 30001 DCA 0
060324,000283: 5460 52064 DXCH TEMPNM
060325,000284: 5461 34767 CA TWO
060326,000285: 5462 26002 ADS Q # OBTAIN RETURN ADDRESS
060327,000286:
060328,000287: 5463 15445 TCF TOCON2
060329,000288:
060330,000289: 5464 5053 OCT14000 EQUALS PRIO14
060331,000290: 5464 0061 TEMPG EQUALS ITEMP1
060332,000291: 5464 0062 TEMPP EQUALS ITEMP2
060333,000292: 5464 0063 TEMPNM EQUALS ITEMP3
060334,000293: 5464 0064 TEMPBB EQUALS ITEMP4
060335,000294: 5464 0065 TEMPSW EQUALS ITEMP5
060336,000295: 5464 0066 TEMPSW2 EQUALS ITEMP6
060337,000296: 5464 0070 TEMPPR EQUALS RUPTREG1
060338,000297: 5464 0071 TEMPG2 EQUALS RUPTREG2
060339,000298: 5464 0072 TEMPP2 EQUALS RUPTREG3
060340,000299:
060341,000300: 5464 0073 TEMPBBCN EQUALS RUPTREG4
060342,000301: 5464 0000006 BB EQUALS BBANK
060343,000302:
060344,000303: 10,2000 SETLOC PHASETAB
060345,000304: 10,2000 BANK
060346,000305:
060347,000306: 10,2473 E3,1436 EBANK= PHSNAME1
060348,000307: 10,2473 COUNT* $$/PHASE
060349,000308: 10,2473 22073 PHSCHNG2 LXCH TEMPBBCN
060350,000309: 10,2474 30065 CA TEMPSW
060351,000310: 10,2475 74774 MASK OCT7
060352,000311: 10,2476 60000 DOUBLE
060353,000312: 10,2477 54061 TS TEMPG
060354,000313:
060355,000314: 10,2500 30065 CA TEMPSW
060356,000315: 10,2501 75056 MASK OCT17770
060357,000316: 10,2502 00006 EXTEND
060358,000317: 10,2503 74755 MP BIT12
060359,000318: 10,2504 54062 TS TEMPP
060360,000319:
060361,000320: 10,2505 30065 CA TEMPSW
060362,000321: 10,2506 74076 MASK OCT60000
060363,000322: 10,2507 56065 XCH TEMPSW
060364,000323: 10,2510 75053 MASK OCT14000
060365,000324: 10,2511 10000 CCS A
060366,000325:
060367,000326: 10,2512 15416 TCF ONEORTWO
060368,000327:
060369,000328: 10,2513 30062 CA TEMPP # START STORING THE PHASE INFORMATION
060370,000329: 10,2514 50061 NDX TEMPG
|
|
Page 1409
|
060372,000331: 10,2515 55154 TS PHASE1 -2
060373,000332:
060374,000333: 10,2516 10066 BELOW1 CCS TEMPSW2 # IS IT A PHASCHNG OR A 2PHSCHNG
060375,000334: 10,2517 12533 TCF BELOW2 # IT:S A PHASCHNG
060376,000335:
060377,000336: 10,2520 12521 TCF +1 # IT:S A 2PHSCHNG
060378,000337: 10,2521 40072 CS TEMPP2
060379,000338: 10,2522 22072 LXCH TEMPP2
060380,000339: 10,2523 50071 NDX TEMPG2
060381,000340: 10,2524 53154 DXCH -PHASE1 -2
060382,000341:
060383,000342: 10,2525 10066 CCS TEMPSW2
060384,000343: 10,2526 12527 NOOP # CAN:T GET HERE
060385,000344: 10,2527 12533 TCF BELOW2
060386,000345:
060387,000346: 10,2530 40025 CS TIME1
060388,000347: 10,2531 50071 NDX TEMPG2
060389,000348: 10,2532 55255 TS TBASE1 -2
060390,000349:
060391,000350: 10,2533 10065 BELOW2 CCS TEMPSW # SEE IF WE SHOULD SET TBASE OR LONGBASE
060392,000351: 10,2534 12547 TCF BELOW3 # SET LONGBASE ONLY
060393,000352: 10,2535 12552 TCF BELOW4 # SET NEITHER
060394,000353:
060395,000354: 10,2536 40025 CS TIME1 # SET TBASE TO BEGIN WITH
060396,000355: 10,2537 50061 NDX TEMPG
060397,000356: 10,2540 55255 TS TBASE1 -2
060398,000357:
060399,000358: 10,2541 30065 CA TEMPSW # SHALL WE NOW SET LONGBASE
060400,000359: 10,2542 62545 AD BIT14COM
060401,000360: 10,2543 10000 CCS A
060402,000361: 10,2544 12545 NOOP # ***** CANT GET HERE *****
060403,000362: 10,2545 17777 BIT14COM OCT 17777 # ***** CANT GET HERE *****
060404,000363: 10,2546 12552 TCF BELOW4 # NO WE NEED ONLY SET TBASE
060405,000364:
060406,000365: 10,2547 00006 BELOW3 EXTEND # SET LONGBASE
060407,000366: 10,2550 30025 DCA TIME2
060408,000367: 10,2551 53303 DXCH LONGBASE
060409,000368:
060410,000369: 10,2552 40062 BELOW4 CS TEMPP # AND STORE THE FINAL PART OF THE PHASE
060411,000370: 10,2553 50061 NDX TEMPG
060412,000371: 10,2554 55153 TS -PHASE1 -2
060413,000372:
060414,000373: 10,2555 30002 CA Q
060415,000374: 10,2556 22073 LXCH TEMPBBCN
060416,000375: 10,2557 00003 RELINT
060417,000376: 10,2560 52006 DTCB
060418,000377: 10,2561 22073 CON2 LXCH TEMPBBCN
060419,000378:
060420,000379: 10,2562 30062 CA TEMPP
060421,000380: 10,2563 50061 NDX TEMPG
|
|
Page 1410
|
060423,000382: 10,2564 55154 TS PHASE1 -2
060424,000383:
060425,000384: 10,2565 30070 CA TEMPPR
060426,000385: 10,2566 50061 NDX TEMPG
060427,000386: 10,2567 55256 TS PHSPRDT1 -2
060428,000387:
060429,000388: 10,2570 00006 EXTEND
060430,000389: 10,2571 30064 DCA TEMPNM
060431,000390: 10,2572 50061 NDX TEMPG
060432,000391: 10,2573 53435 DXCH PHSNAME1 -2
060433,000392:
060434,000393: 10,2574 12516 TCF BELOW1
060435,000394:
060436,000395: 4000 SETLOC FFTAG1
060437,000396: 4000 BANK
060438,000397:
060439,000398: 5464 COUNT* $$/PHASE
060440,000399: 5464 74755 CHECKB MASK BIT12 # SINCE THIS IS OF TYPE B, THIS BIT SHOULD
060441,000400: 5465 10000 CCS A # BE HERE IF WE ARE TO GET A NEW PRIORITY
060442,000401: 5466 15451 TCF GETPRIO # IT IS, SO GET NEW PRIORITY
060443,000402:
060444,000403: 5467 15430 TCF OLDPRIO # IT ISN:T, USE THE OLD PRIORITY
End of include-file PHASE_TABLE_MAINTENANCE.agc. Parent file is MAIN.agc